Import tex-abc-doc-1.0 as print/tex-abc-doc.  Packaged by Nicolas Thauvin.

This is documentation for tex-abc.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Note PKGREVISION bump of tex-abc.

(minskim)

Depend on TeX Live packages instead of teTeX.

Patches provided by Nicolas Thauvin and slightly modified by me.

(minskim)

Note update of tex-tools{,-doc}.

(minskim)

Update tex-tools{,-doc} to TeX Live r20258.

- Use PDF 1.5 instead of 1.4.

(minskim)

Note PKGREVISION bump of tex-graphics-doc.

(minskim)

Update tex-graphics{,-doc} to TeX Live r20255.

- Documentation updates.

(minskim)

Try to fix plist problem under netbsd

(tonio)

Note PKGREVISION bump of tex-luatex.

(minskim)

Let tex-luatex use hyphenation patterns registered in language.dat.lua.

(minskim)

Allow tex-hyphen-* packages to install hyphenation patterns for luatex.

(minskim)

Make it build with newer gmake

(tonio)

Add 'unicode' option (support for non-Latin-1 characters in ID3v2 tags).
Revision++.

(shattered)

kqueue is BSD-specific; add it to PKG_SUPPORTED_OPTIONS only on *BSD.

(shattered)

Updated mail/mutt-devel to 1.5.21

(tonio)

Update mail/mutt-devel to 1.5.21

1.5.21 (2010-09-15):
  + $mail_check_recent controls whether all unread mail or only new mail
    since the last mailbox visit will be reported as new
  + %D format expando for $folder_format
  ! $thorough_search defaults to yes
  + imap-logout-all closes all open IMAP connections
  ! header/body cache paths are always UTF-8
  + $wrap_headers to control outgoing message's header length
  + all text/* parts can be displayed inline without mailcap
  + send-hooks now run in batch mode; previously only send2-hooks ran.

(tonio)

Note update of atf to 0.12

(jmmv)

Update atf to 0.12:

* Added the ATF_REQUIRE_THROW_RE to atf-c++, which is the same as
  ATF_REQUIRE_THROW but allows checking for the validity of the exception's
  error message by means of a regular expression.

* Added the ATF_REQUIRE_MATCH to atf-c++, which allows checking for a
  regular expression match in a string.

* Changed the default timeout for test cases from 5 minutes to 30 seconds.
  30 seconds is long enough for virtually all tests to complete, and 5
  minutes is a way too long pause in a test suite where a single test case
  stalls.

* Deprecated the use.fs property.  While this seemed like a good idea in
  the first place to impose more control on what test cases can do, it
  turns out to be bad.  First, use.fs=false prevents bogus test cases
  from dumping core so after-the-fact debugging is harder.  Second,
  supporting use.fs adds a lot of unnecessary complexity.  atf-run will
  now ignore any value provided to use.fs and will allow test cases to
  freely access the file system if they wish to.

* Added the atf_tc_get_config_var_as_{bool,long}{,_wd} functions to the atf-c
  library.  The 'text' module became private in 0.11 but was being used
  externally to simplify the parsing of configuration variables.

* Made atf-run recognize the 'unprivileged-user' configuration variable
  and automatically drop root privileges when a test case sets
  require.user=unprivileged.  Note that this is, by no means, done for
  security purposes; this is just for user convenience; tests should, in
  general, not be blindly run as root in the first place.

(jmmv)

MASTER_SITES fix

(adam)

Fix typo

(gls)

remove suse 11.0 entry (done as suse 11.3).

(chs)

Note addition of suse 11.3 packages.

(chs)

Initial import of openSUSE 11.3 meta-pkg.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

add suse113.

(chs)

add suse113_*.

(chs)

add EMULDIR and EMULSUBDIR to MESSAGE_SUBST list.

(chs)

add support for suse-11.3.

(chs)

pay attention to SUSE_PREFER.
update modules list.

(chs)

update comments about possible values of SUSE_PREFER.

(chs)

Initial import of openSUSE 11.3 meta-pkg.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Initial import of openSUSE 11.3 packages for Linux emulation.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(chs)

Fix for the "annotated bulk failures" mail discussion.
(ok dholland)

(pettai)

RELEASE 0.4-stable
------------------
- Fix disapearing upload form disapears when user selects a file on Safari (#148
6823)
- Don't replace error messages with loading info (#1486300)
- Fix JS errors on compose mode switch (#1486870)
- Fix message structure parsing when it lacks optional fields (#1486881)
- Include all recipients in sendmail log
- Support HTTP_X_FORWARDED_PROTO header for HTTPS detecting (#1486866)
- Fix default IMAP port configuration (#1486864)
- Create Sent folder when starting to compose a new message (#1486802)
- Fix handling of messages with Content-Type: application/* and no filename (#14
84050)
- Improved compose screen: resizable body and attachments list, vertical splitte
r, options menu
- Fix RC forgets search results (#1483883)
- TinyMCE 3.3.7
- Improve parsing of styled empty tags in HTML messages (#1486812)
- Add %dc variable support in base_dn/bind_dn config (#1486779)
- Add button to hide/unhide the preview pane (#1484215)
- Fix no-cache headers on https to prevent content caching by proxies (#1486798)
- Fix attachment filenames broken with TNEF decoder using long filenames (#14867
95)
- Use user's timezone in Date header, not server's timezone (#1486119)
- Add option to set separate footer for HTML messages (#1486660)
- Add real SMTP error description to displayed error messages (#1485927)
- Fix some IMAP errors handling when opening the message (#1485443)
- Fix related parts aren't displayed when got mimetype other than image/* (#1486
432)
- Multiple identity and database support for squirrelmail_usercopy plugin (#1486
517)
- Support dynamic hostname (%d/%n) variables in configuration options (#1485438)
- Add 'messages_list' hook (#1486266)
- Add request* event triggers in http_post/http_request (#1486054)
- Fix use RFC-compliant line-delimiter when saving messages on IMAP (#1486712)
- Add 'imap_timeout' option (#1486760)
- Fix forwarding of messages with winmail attachments
- Fix handling of uuencoded attachments in message body (#1485839)
- Added list_mailboxes hook in rcube_imap::list_unsubscribed() (#1486668)
- Fix wrong message on file upload error (#1486725)
- Add support for data URI scheme [RFC2397] (#1486740)
- Added 'actionbefore', 'actionafter', 'responsebefore', 'responseafter' events
- Fix double-addition of e-mail domain to content ID in HTML images
- Read and send messages with format=flowed (#1484370), fixes word wrapping issu
es (#1486543)
- Fix duplicated attachments when forwarding a message (#1486487)
- Fix message/rfc822 attachments containing only attachments are not parsed prop
erly (#1486743)
- Fix %00 character in winmail.dat attachments names (#1486738)
- Fix handling errors of folder deletion (#1486705)
- Parse untagged CAPABILITY response for LOGIN command (#1486742)
- Renamed all php-cli scripts to use .sh extension
- Some files from /bin + spellchecking actions moved to the new 'utils' task
- Added thread tree icons
- Extend contact groups support (#1486682)
- Fix check-recent action issues and performance (#1486526)
- Fix messages order after checking for recent (#1484664)
- Fix autocomplete shows entries without email (#1486452)
- Fix listupdate event doesn't trigger on search response (#1486708)
- Fix select_all_mode value after selecting a message (#1486720)
- Set focus to editor on reply in HTML mode (#1486632)
- Fix composing in HTML jumps cursor to body instead of recipients (#1486674)
- Allow columns order change per user - drag&drop (#1485795)
- Add References header in read receipt (#1486681)
- Fix database constraint violation when opening a message (#1486696)
- Add 'loading' message while login is in progress (#1486667)
- Fix quota_zero_as_unlimited (#1486662)
- Fix folder subscription checking (#1486684)
- Fix INBOX appears (sometimes) twice in mailbox list (#1486672)
- Fix listing of attachments of some types e.g. "x-epoc/x-sisx-app" (#1486653)
- Fix DB Schema checking when some db_table_* options are not set (#1486654)

RELEASE 0.4-beta
----------------
- Add sizelimit and timelimit variables in LDAP config (#1486544)
- Hide IMAP host dropdown when single host is defined (#1486326)
- Add images pre-loading on login page (#1451160)
- Add HTTP_X_REAL_IP and HTTP_X_FORWARDED_FOR to successful logins log (#1486441
)
- Fix setting spellcheck languages with extended codes (#1486605)
- Fix messages list scrolling in FF3.6 (#1486472)
- Fix quicksearch input focus (#1486637)
- Always set changed date when flagging a DB record as deleted + provide a clean
up script
- Fix address book/group selection (#1486619)
- Assign newly created contacts to the active group (#1486626)
- Added option not to mark messages as read when viewed in preview pane (#148501
2)
- Allow plugins modify the Sent folder when composing (#1486548)
- Added optional (max_recipients) support to restrict total number of recipients
per message (#1484542)
- Re-organize editor buttons, add blockquote and search buttons
- Make possible to write inside or after a quoted html message (#1485476)
- Fix bugs on unexpected IMAP connection close (#1486190, #1486270)
- Iloha's imap.inc rewritten into rcube_imap_generic class
- Added contact groups in address book (not finished yet)
- Added PageUp/PageDown/Home/End keys support on lists (#1486430)
- Added possibility to select all messages in a folder (#1484756)
- Added 'imap_force_caps' option for after-login CAPABILITY checking (#1485750)
- Password: Support dovecotpw encryption
- TinyMCE 3.3.1
- Implemented messages copying using drag&drop + SHIFT (#1484086)
- Improved performance of folders operations (#1486525)
- Fix blocked.gif attachment is not attached to the message (#1486516)
- Managesieve: import from Horde-INGO
- Managesieve: support for more than one match (#1486078)
- Managesieve: support for selectively disabling rules within a single sieve scr
ipt (#1485882)
- Threaded message listing now available
- Added sorting by ARRIVAL and CC
- Message list columns configurable by the user
- Removed 'index_sort' option, now we're using empty 'message_sort_col' for this
- virtuser_query: support other identity data (#1486148)
- Options virtuser_* replaced with virtuser_* plugins
- Plugin API: Implemented 'email2user' and 'user2email' hooks
- Fix forwarding message omits CC header (#1486305)
- Add 'default_charset' option to user preferences (#1485451)
- Add 'delete_always' option to user preferences
- Support/Require tls:// prefix in 'smtp_server' option for TLS connections
- Fix inconsistent behaviour of 'delete_always' option (#1486299)
- Fix deleting all messages from last list page (#1486293)
- Flag original messages when sending a draft (#1486203)
- Changed signature separator when top-posting (#1486330)
- Let the admin define defaults for search modifiers (#1485897)
- Fix long e-mail addresses validation (#1486453)
- Remember search modifiers in user prefs (#1486146)
- Added force_7bit option to force MIME encoding of plain/text messages (#148651
0)
- Use case sensitive check when checking for default folders (#1486346)
- Fix checking for new mail: now checks unseen count of inbox (#1485794)
- Improve performance by avoiding unnecessary updates to the session table (#148
6325)
- Fix invalid <font> tags which cause HTML message rendering problems (#1486521)
- Fix CVE-2010-0464: Disable DNS prefetching (#1486449)
- Fix Received headers to behave better with SpamAssassin (#1486513)
- Password: Make passwords encoding consistent with core, add 'password_charset'
global option (#1486473)
- Fix adding contacts SQL error on mysql (#1486459)
- Squirrelmail_usercopy: support reply-to field (#1486506)
- Fix IE spellcheck suggestion popup issue (#1486471)
- Fix email address auto-completion shows regexp pattern (#1486258)
- Fix merging of configuration parameters: user prefs always survive (#1486368)
- Fix quota indicator value after folder purge/expunge (#1486488)
- Fix external mailto links support for use as protocol handler (#1486037)
- Fix attachment excessive memory use, support messages of any size (#1484660)
- Fix setting task name according to auth state
- Password: fix vpopmaild driver (#1486478)
- Add workaround for MySQL bug [http://bugs.mysql.com/bug.php?id=46293] (#148647
4)
- Fix quoted text wrapping when replying to an HTML email in plain text (#148414
1)
- Fix handling of extended mailto links (with params) (#1486354)
- Fix sorting by date of messages without date header on servers without SORT (#
1486286)
- Fix inconsistency when not using default table names (#1486467)
- Fix folder rename/delete buttons do not appear on creation of first folder (#1
486468)
- Fix character set conversion fails on systems where iconv doesn't accept //IGN
ORE (#1486375)
- Log in performance: Create default folders on first login only
- Import contacts into the selected address book (by Phil Weir)
- Add support for MDB2's 'sqlsrv' driver (#1486395)
- Use jQuery-1.4
- Removed problematic browser-caching of messages
- Fix incompatybility with suhosin.executor.disable_emodifier (#1486321)
- Use PLAIN auth when CRAM fails and imap_auth_type='check' (#1486371)
- Fix removal of <title> tag from HTML messages (#1486432)
- Fix 'force_https' to specified port when URL contains a port number (#1486411)
- Fix to-text converting of HTML entities inside b/strong/th/hX tags (#1486422)
- Bug in spellchecker suggestions when server charset != UTF8 (#1486406)
- Managesieve: Fix requires generation for multiple actions (#1486397)
- Fix LDAP problem with special characters in RDN (#1486320)
- Improved handling of message parts of type message/rfc822
- Plugin API: added 'quota' hook
- Fix parsing conditional comments in HTML messages (#1486350)
- Use built-in json_encode() for proper JSON format in AJAX replies
- Allow setting only selected params in 'message_compose' hook (#1486312)
- Plugin API: added 'message_compose_body' hook (#1486285)
- Fix counters of all folders are checked in 'getunread' action  with check_all_
folders disabled (#1486128)
- Fix displaying alternative parts in messages of type message/rfc822 (#1486246)
- Fix possible messages exposure when using Roundcube behind a proxy (#1486281)
- Fix unicode para and line separators in javascript response (#1486310)
- Additional_message_headers: allow unsetting headers, support plugin's config f
ile (#1486268)
- Fix displaying of hidden directories in skins list (#1486301)
- Fix open_basedir restriction error when reading skins list (#1486304)
- Fix pasting from Office apps into html editor (#1486271)
- Fix empty <a> tags parsing (#1486272)
- Don't cut off attachment names when using non-RFC2231 encoding (#1485515)
- Allow inserting signatures above replied message body (#1484272)
- Managesieve 2.0: multi-script support
- Fix imap_auth_type regression (#1486263)

(ok schmonz, take over maintainer)

(pettai)

Updated comms/asterisk16 to 1.6.2.13

(jnemeth)

    Update to the 1.6.2 series (specifically 1.6.2.13).  This is
a feature update, so users that are upgrading should read UPDATE.txt.

pkgsrc changes:

- update to 1.6.2.13
- bury the asterisk-sounds-extra inside this one to keep it in sync
- handle sound tarballs directly (upstream had changed this to do a
  download during the install phase and dump files in $HOME)
- add new documentation files:
  - asterisk.txt
  - building_queues.txt
  - database_transactions.txt
  - followme.txt

========
1.6.2.13
========

This release resolves an issue where the .version and ChangeLog files were not
updated for 1.6.2.12. Asterisk 1.6.2.13 has no additional changes from 1.6.2.12
other than the .version, ChangeLog and summary files.

For a full list of changes in the current release, please see the
ChangeLog:

http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.13

========
1.6.2.12
========

The release of Asterisk 1.6.2.12 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

The following is a sample of the issues resolved in this release:

    * Fix issue where DNID does not get cleared on a new call when using
      immediate=yes with ISDN signaling.
      (Closes issue #17568. Reported by wuwu. Patched by rmudgett)
    * Several updates to res_config_ldap.
      (Closes issue #13573. Reported by navkumar. Patched by navkumar, bencer.
      Tested by suretec)
    * Prevent loss of Caller ID information set on local channel after masquerade.
      (Closes issue #17138. Reported by kobaz, patched by jpeeler)
    * Fix SIP peers memory leak.
      (Closes issue #17774. Reported, patched by kkm)
    * Add Danish support to say.conf.sample
      (Closes issue #17836. Reported, patched by RoadKill)
    * Ensure SSRC is changed when media source is changed to resolve audio delay.
      (Closes issue #17404. Reported, tested by sdolloff. Patched by jpeeler)
    * Only do magic pickup when notifycid is enabled.
      A new way of doing BLF pickup was introduced into 1.6.2. This feature adds a
      call-id value into the XML of a SIP_NOTIFY message sent to alert a subscriber
      that a device is ringing. This option should only be enabled when the new
      'notifycid' option is set, but this was not the case. Instead the call-id
      value was included for every RINGING Notify message, which caused a
      regression for people who used other methods for call pickup.
      (Closes issue #17633. Reported, patched by urosh. Patched by dvossel.
      Tested by: dvossel, urosh, okrief, alecdavis)

For a full list of changes in the current release, please see the
ChangeLog:

http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.12

========
1.6.2.11
========

The release of Asterisk 1.6.2.11 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

The following are a few of the issues resolved by community developers:

  * Send DialPlanComplete as a response, not as a separate event. Otherwise, it
    goes to all manager sessions and may exclude the current session, if the
    Events mask excludes it.
    (Closes issue #17504. Reported, patched by rrb3942)

  * Allow the "useragent" value to be restored into memory from the realtime
    backend. This value is purely informational. It does not alter configuration
    at all.
    (Closes issue #16029. Reported, patched by Guggemand)

  * Fix rt(c)p set debug ip taking wrong argument Also clean up some coding
    errors.
    (Closes issue #17469. Reported, patched by wdoekes)

  * Ensure channel placed in meetme in ringing state is properly hung up. An
    outgoing channel placed in meetme while still ringing which was then hung up
    would not exit meetme and the channel was not properly destroyed.
    (Closes issue #15871. Reported, patched by Ivan)

  * Correct how 100, 200, 300, etc. is said. Also add the crazy British numbers.
    (Closes issue #16102. Reported, patched by Delvar)

  * cdr_pgsql does not detect when a table is found. This change adds an ERROR
    message to let you know when a failure exists to get the columns from the
    pgsql database, which typically means that the table does not exist.
    (Closes issue #17478. Reported, patched by kobaz)

  * Avoid crashing when installing a duplicate translation path with a lower
    cost.
    (Closes issue #17092. Reported, patched by moy)

  * Add missing handling for ringing state for use with queue empty options.
    (Closes issue #17471. Reported, patched by jazzy)

  * Fix reporting estimated queue hold time. Just say the number of seconds
    (after minutes) rather than doing some incorrect calculation with respect to
    minutes.
    (Closes issue #17498. Reported, patched by corruptor)

For a full list of changes in the current release, please see the
ChangeLog:

http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.11

========
1.6.2.10
========

The release of Asterisk 1.6.2.10 resolves several issues reported by the
community and would have not been possible without your participation.
Thank you!

The following are a few of the issues resolved by community developers:

  * Allow users to specify a port for DUNDI peers.
    (Closes issue #17056. Reported, patched by klaus3000)

  * Decrease the module ref count in sip_hangup when SIP_DEFER_BYE_ON_TRANSFER is
    set.
    (Closes issue #16815. Reported, patched by rain)

  * If there is realtime configuration, it does not get re-read on reload unless
    the config file also changes.
    (Closes issue #16982. Reported, patched by dmitri)

  * Send AgentComplete manager event for attended transfers.
    (Closes issue #16819. Reported, patched by elbriga)

  * Correct manager variable 'EventList' case.
    (Closes issue #17520. Reported, patched by kobaz)

In addition, changes to res_timing_pthread that should make it more stable have
also been implemented.

For a full list of changes in the current release, please see the
ChangeLog:

http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.10

=======
1.6.2.9
=======

The release of Asterisk 1.6.2.9 resolves several issues reported by the
community, and would have not been possible without your participation.
Thank you!

The following are a few of the issues resolved by community developers:

  * Fix the PickupChan() application
    (Closes issue #16863. Reported, patched by schern. Patched by cjacobsen.
    Tested by Graber, cjacobsen, lathama, rickead2000, dvossel)

  * Improve logging by displaying line number
    (Closes issue #16303. Reported by dant. Patched by pabelanger. Tested by
    dant, pabelanger, lmadsen)

  * Notify CLI when modules are loaded/unloaded
    (Closes issue #17308. Reported, patched by pabelanger. Tested by russell)

  * Make the Makefile logic more explicit and move the Snow Leopard logic down to
    where it's not executed on non-Darwin systems
    (Closes issue #17028. Reported by pabelanger. Patched by seanbright,
    tilghman. Tested by pabelanger)

  * Manager cookies are not compatible with RFC2109. Make that no longer true.
    (Closes issue #17231. Reported, patched by ecarruda)

  * With IMAP backend, messages in INBOX were counted twice for MWI
    (Closes issue #17135. Reported by edhorton. Patched by ebroad, tilghman)

  * Fix possible segfault when logging
    (Closes issue #17331. Reported, patched by under. Patched by dvossel)

  * Fix memory hogging behavior of app_queue
    (Closes issue #17081. Reported by wliegel. Patched by mmichelson)

  * Allow type=user SIP endpoints to be loaded properly from realtime
    (Closes issue #16021. Reported, patched by Guggemand)

Additionally, the following issue may be of interest:

  * Fix transcode_via_sln option with SIP calls and improve PLC usage
    (Review: https://reviewboard.asterisk.org/r/622/)

For a full list of changes in the current release, please see the
ChangeLog:

http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.9

=======
1.6.2.8
=======

The release of Asterisk 1.6.2.8 resolves several issues reported by the
community, and would have not been possible without your participation.
Thank you!

The following are a few of the issues resolved by community developers:

  * Enable auto complete for CLI command 'logger set level'.
    (Closes issue #17152. Reported, patched by pabelanger)

  * Make the mixmonitor thread process audio frames faster.
    (Closes issue #17078. Reported, tested by geoff2010. Patched by dhubbard)

  * Add missing 'useragent' field to sip-friends.sql file.
    (Closes issue #17171. Reported, patched by thehar)

  * Add example dialplan for dialing ISN numbers (http://www.freenum.org)
    (Closes issue #17058. Reported, patched by pprindeville)

  * Fix issue with double "sip:" in header field.
    (Closes issue #15847. Reported, patched by ebroad)

  * Add ability to generate ASCII documentation from the TeX files by running
    'make asterisk.txt'.
    (Closes issue #17220. Reported by lmadsen. Tested, patched by pabelanger)

  * When StopMonitor() is called, ensure that it will not be restarted by a
    channel event.
    (Closes issue #16590. Reported, patched by kkm)

  * Small error in the T.140 RTP port verbose log.
    (Closes issue #16998. Reported, patched by frawd. Tested by russell)

For a full list of changes in the current release, please see the
ChangeLog:

http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.8

=======
1.6.2.7
=======

The release of Asterisk 1.6.2.7 resolves several issues reported by the
community, and would have not been possible without your participation. Thank
you!

The following are a few of the issues resolved by community developers:

  * Fix building CDR and CEL SQLite3 modules.
    (Closes issue #17017. Reported by alephlg. Patched by seanbright)

  * Resolve crash in SLAtrunk when the specified trunk doesn't exist.
    (Reported in #asterisk-dev by philipp64. Patched by seanbright)

  * Include an extra newline after "Aliased CLI command" to get back the prompt.
    (Issue #16978. Reported by jw-asterisk. Tested, patched by seanbright)

  * Prevent segfault if bad magic number is encountered.
    (Issue #17037. Reported, patched by alecdavis)

  * Update code to reflect that handle_speechset has 4 arguments.
    (Closes issue #17093. Reported, patched by gpatri. Tested by pabelanger,
    mmichelson)

  * Resolve a deadlock in chan_local.
    (Closes issue #16840. Reported, patched by bzing2, russell. Tested by bzing2)

For a full list of changes in this releases, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.7

=======
1.6.2.6
=======

The release of Asterisk 1.6.2.6 resolves several issues reported by the
community, and would have not been possible without your participation. Thank
you!

The following are a few of the issues resolved by community developers:

  * Make sure to clear red alarm after polarity reversal.
    (Closes issue #14163. Reported, patched by jedi98. Tested by mattbrown,
    Chainsaw, mikeeccleston)

  * Fix problem with duplicate TXREQ packets in chan_iax2
    (Closes issue #16904. Reported, patched by rain. Tested by rain, dvossel)

  * Fix crash in app_voicemail related to message counting.
    (Closes issue #16921. Reported, tested by whardier. Patched by seanbright)

  * Overlap receiving: Automatically send CALL PROCEEDING when dialplan starts
    (Reported, Patched, and Tested by alecdavis)

  * For T.38 reINVITEs treat a 606 the same as a 488.
    (Closes issue #16792. Reported, patched by vrban)

  * Fix ConfBridge crash when no timing module is loaded.
    (Closes issue #16471. Reported, tested by kjotte. Patched, tested by junky)

For a full list of changes in this releases, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.6

=======
1.6.2.5
=======

The Asterisk Development Team has announced security releases for the following
versions of Asterisk:

* 1.6.2.5

The releases of Asterisk 1.6.0.25, 1.6.1.17, and 1.6.2.5 resolve an issue with
invalid parsing of ACL (Access Control List) rules leading to a possible
compromise in security. The issue and resolution are described in the
AST-2010-003 security advisory.

For more information about the details of this vulnerability, please read the
security advisory AST-2010-003, which was released at the same time as this
announcement.

For a full list of changes in the current releases, please see the ChangeLog:

http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.5

Security advisory AST-2010-003 is available at:

http://downloads.asterisk.org/pub/security/AST-2010-003.pdf

=======
1.6.2.4
=======

The Asterisk Development Team has announced security releases for the following
versions of Asterisk:

* 1.6.2.4

The releases of Asterisk 1.2.40, 1.4.29.1, 1.6.0.24, 1.6.1.16, and 1.6.2.4
include documention describing a possible dialplan string injection with common
usage of the ${EXTEN} (and other expansion variables). The issue and resolution
are described in the AST-2010-002 security advisory.

If you have a channel technology which can accept characters other than numbers
and letters (such as SIP) it may be possible to craft an INVITE which sends data
such as 300&Zap/g1/4165551212 which would create an additional outgoing channel
leg that was not originally intended by the dialplan programmer.

Please note that this is not limited to an specific protocol or the Dial()
application.

The expansion of variables into programmatically-interpreted strings is a common
behavior in many script or script-like languages, Asterisk included. The ability
for a variable to directly replace components of a command is a feature, not a
bug - that is the entire point of string expansion.

However, it is often the case due to expediency or design misunderstanding that
a developer will not examine and filter string data from external sources before
passing it into potentially harmful areas of their dialplan.

With the flexibility of the design of Asterisk come these risks if the dialplan
designer is not suitably cautious as to how foreign data is allowed to enter the
system unchecked.

This security release is intended to raise awareness of how it is possible to
insert malicious strings into dialplans, and to advise developers to read the
best practices documents so that they may easily avoid these dangers.

For more information about the details of this vulnerability, please read the
security advisory AST-2010-002, which was released at the same time as this
announcement.

For a full list of changes in the current releases, please see the ChangeLog:

http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.4

Security advisory AST-2010-002 is available at:

http://downloads.asterisk.org/pub/security/AST-2010-002.pdf

The README-SERIOUSLY.bestpractices.txt document is available in the top-level
directory of your Asterisk sources, or available in all Asterisk branches from
1.2 and up.

http://svn.asterisk.org/svn/asterisk/trunk/README-SERIOUSLY.bestpractices.txt

=======
1.6.2.3
=======

Was never released.

=======
1.6.2.2
=======

The Asterisk Development Team has announced security releases for Asterisk as
the following versions:

* 1.6.2.2

The releases of Asterisk 1.6.0.22, 1.6.1.14, and 1.6.2.2 include the fix
described in security advisory AST-2010-001.

The issue is that an attacker attempting to negotiate T.38 over SIP can remotely
crash Asterisk by modifying the FaxMaxDatagram field of the SDP to contain
either a negative or exceptionally large value.  The same crash will occur when
the FaxMaxDatagram field is omitted from the SDP, as well.

For more information about the details of this vulnerability, please read the
security advisory AST-2009-009, which was released at the same time as this
announcement.

For a full list of changes in the current releases, please see the ChangeLog:

http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.2

Security advisory AST-2010-001 is available at:

http://downloads.asterisk.org/pub/security/AST-2010-001.pdf

=======
1.6.2.1
=======

The release of Asterisk 1.6.2.1 resolved several issues reported by the
community, and would have not been possible without your participation. Thank
you!

* CLI 'queue show' formatting fix.
  (Closes issue #16078. Reported by RoadKill. Tested by dvossel. Patched by
    ppyy.)

* Fix misreverting from 177158.
  (Closes issue #15725. Reported, Tested by shanermn. Patched by dimas.)

* Fixes subscriptions being lost after 'module reload'.
  (Closes issue #16093. Reported by jlaroff. Patched by dvossel.)

* app_queue segfaults if realtime field uniqueid is NULL
  (Closes issue #16385. Reported, Tested, Patched by haakon.)

* Fix to Monitor which previously assumed the file to write to did not contain
  pathing.
  (Closes issue #16377, #16376. Reported by bcnit. Patched by dant.

A summary of changes in this release can be found in the release summary:
http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-1.6.2.1-summary.txt

For a full list of changes in this releases, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.1

=======
1.6.2.0
=======

The release of Asterisk 1.6.2.0 is the first feature release since Asterisk
1.6.1.0, which was released April 27, 2009. Many new features have been included
in this release. For a complete list of changes, please see the CHANGES file.
For those upgrading from a previous release, please see UPGRADE.txt

It should be explicitly stated that Asterisk 1.6.2.0 is a major upgrade over any
previous release, and special care should be taken when upgrading existing
systems. Please see the UPGRADE.txt file for more information, available at:

http://svn.asterisk.org/svn/asterisk/tags/1.6.2.0/UPGRADE.txt

A detailed overview to the new features available in Asterisk 1.6.2.0 are
forthcoming within the next few days. Please watch http://blogs.asterisk.org for
further information!

Below is a summary of several new features available in this release:

  * chan_dahdi now supports MFC/R2 signaling when Asterisk is compiled with
    support for LibOpenR2.  http://www.libopenr2.org/

  * Added a new 'faxdetect=yes|no' configuration option to sip.conf.  When this
    option is enabled, Asterisk will watch for a CNG tone in the incoming audio
    for a received call.  If it is detected, the channel will jump to the
    'fax' extension in the dialplan.

  * A new application, Originate, has been introduced, that allows asynchronous
    call origination from the dialplan.

  * Added ConfBridge dialplan application which does conference bridges without
    DAHDI. For information on its use, please see the output of
    "core show application ConfBridge" from the CLI.

  * extensions.conf now allows you to use keyword "same" to define an extension
    without actually specifying an extension.  It uses exactly the same pattern
    as previously used on the last "exten" line.  For example:
      exten => 123,1,NoOp(something)
      same  =>    n,SomethingElse()

  * Asterisk now provides the ability to define custom CLI aliases.  For example,
    if you would like to define short form aliases for frequently used commands,
    such as "sh ch" for "core show channels", that is now possible.  See the
    cli_aliases.conf configuration file for more information.

  * Asterisk now has support for subscribing to the state of remote voice
    mailboxes via SIP.

  * Asterisk now includes expanded HD codec support.  G.722.1 and G.722.1C
    (Siren7/Siren14) passthrough, recording, and playback is now supported.
    Transcoding will be made available via add-on modules soon for this version of
    Asterisk.

This is just a subset of the changes available in this release. Please see the
CHANGES file for additional information, available at:
http://svn.asterisk.org/svn/asterisk/tags/1.6.2.0/CHANGES

A summary of changes in this release can be found in the release summary:
http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-1.6.2.0-summary.txt

For a full list of changes in this releases, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-1.6.2.0

(jnemeth)

Updated net/p5-Net-TFTP to 0.18

(sno)

Updating net/p5-Net-TFTP from 0.17nb2 to 0.18

pkgsrc changes:
- add license definition

Upstream changes:
0.18 -- Mon May 31 10:38:13 CDT 2010
  * Added support for IPv6 (patch from John Jason Brzozowski)
  * Added .gitignore file [Maik Hentsche]
  * added unit tests [Maik Hentsche]
  * added directory for unit test [Maik Hentsche]
  * handle unlink error [Maik Hentsche]
  * added unit test for missing host [Maik Hentsche]
  * Fix warning for new() without host argument [Maik Hentsche]

(sno)

Updated devel/p5-Module-Install-XSUtil to 0.33

(sno)

Updating devel/p5-Module-Install-XSUtil from 0.27 to 0.33

Upstream changes:
0.33 Sun Sep 19 22:15:10 2010
    - Disable -Wdeclaration-after-statement by requires_c99()

0.32 Mon Sep 13 14:18:33 2010
    - Don't clean xshelper.h by default.
      Use use_xshelper -clean (or -realclean) to clean the file.

0.31 Mon Sep 13 13:09:16 2010
    - Fix a check for STATIC_INLINE (s/__cplusplus__/__cplusplus/)

0.30 Sat Sep 11 14:17:06 2010
    - Add use_xshelper() command to create xshelper.h

(sno)

Updated www/p5-Catalyst-Controller-HTML-FormFu to 0.08002

(sno)

Updating www/p5-Catalyst-Controller-HTML-FormFu from 0.06001nb1 to 0.08002

pkgsrc changes:
- adjusting dependencies

Upstream changes:
0.08002 2010-09-22
    - Incompatible Change: removed all previously deprecated methods.

(sno)

Removed net/p5-Net-IRC

(sno)

removing net/p5-Net-IRC - marked as deprecated upstream and is not
gonna be maintained (and hasn't been the last years)

(sno)