Updated net/istgt to 20100407

(sborrill)

Update to 20100407.

Main changelog is in Japanese. Author says:

Main changes:
support auto size of block device at various OS. (includes
NetBSD,MacOSX,Linux)
remove ZFS and /usr/local from src.
remove unused config.

Also includes patches from pkgsrc fed upstream (thanks Daisuke!).

(sborrill)

Add DIST_SUBDIR to match typolight27's update.

(taca)

Note addition of p5-IPC-Signal, p5-Proc-WaitStat and mime-construct.

(jmmv)

Add and enable mime-construct.

(jmmv)

Initial import of mime-construct 1.10:

mime-construct is a tool to construct and optinally send MIME email messages.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(jmmv)

Drop exactly build dependency on lang/ruby.
It should not be used, because of conflict with pkg_alternatives.
Include lang/ruby/buildlink3.mk with BUILDLINK_DEPMETHOD=build instead.

While here convert custom REPLACE interpreter for ruby to
REPlACE_RUBY defined in lang/ruby/replace.mk.

(obache)

Add and enable p5-IPC-Signal and p5-Proc-WaitStat.

(jmmv)

Initial import of p5-Proc-WaitStat 1.00:

The Perl 5 module Proc::WaitStat provides functions to intepret and act upon
wait status values.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(jmmv)

Initial import of p5-IPC-Signal 1.00:

The Perl 5 module IPC::Signal provides functions to deal with signals.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(jmmv)

Update to miniupnpd-1.4.20100308
Changes include:
* ipfilter fixes
* NAT-PMP source address should now be right

(roy)

update MASTER_SITES

(sbd)

Updated net/net-snmp to 5.4.2.1nb4

(adam)

Added patches, courtesy of Mike Bowie:
* Address changes in sysctl() storage, which has yielded values such as
  IP-MIB::ipForwarding.0 invalid.
* RAM reporting on 64-bit systems.

(adam)

Note update of tex-footmisc{,-doc}.

(minskim)

Update tex-footmisc{,-doc} to 5.5a.

- Spacing adjustment.

(minskim)

Update DISTFILES.

(minskim)

Update DISTFILES.

(minskim)

Note PKGREVISION bump of tex-fancyvrb{,-doc}.

(minskim)

Update tex-fancyvrb{,-doc} to the version from TeX Live 2009.

- Fixed codes which were incorrectly written as '?'.

(minskim)

Note update of tex-algorithms{,-doc}.

(minskim)

Update tex-algorithms to 2009 (CTAN catalogue version 0.1).

Changes:
- Added many commands including \AND, \OR, \XOR, \NOT, \RETURN, etc.

(minskim)

Update DISTFILES.

(minskim)

Update DISTFILES.

(minskim)

Update DISTFILES.

(minskim)

Update DISTFILES.

(minskim)

Update DISTFILES.

(minskim)

Let tex-hyphen-coptic use DISTFILES from TeX Live 2009. No functional change.

(minskim)

Let tex-acmtrans{,-doc} use DISTFILES from TeX Live 2009.

(minskim)

Note update of tex-elsarticle{,-doc}.

(minskim)

Update tex-elsarticle{,-doc} to 1.20.

Changes:
  - formatting changes in \appendix.
  - margin changes.
  - documentation updates.
  - other changes and bug fixes.

(minskim)

Note PKGREVISION bump of teTeX-texmf.

(minskim)

Resolve conflicts between teTeX-texmf and recently-imported TeX Live
packages.

(minskim)

Add tex-collection-latex{,-doc}.

(minskim)

Import tex-collection-latex-doc-2009 as print/tex-collection-latex-doc.

This is documentation for tex-collection-latex.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Import tex-collection-latex-2009 as print/tex-collection-latex.

These packages are mandated by the core LaTeX team, or at least very
strongly recommended.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Add tex-supp-pdf.

(minskim)

Import tex-supp-pdf-2009 as print/tex-supp-pdf.

The supp-pdf.* files support native MetaPost graphics inclusion in LaTeX
(via pdftex.def) and ConTeXt.  They can be used independently of the
rest of the ConTeXt, yet are maintained as part of it.  So in TeX Live
we pull them out to this separate package for the benefit of LaTeX users
who do not install the rest of ConTeXt.  They can be found on CTAN in
macros/pdftex/graphics.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Add tex-pslatex.

(minskim)

Import tex-pslatex-2009 as print/tex-pslatex.

A small package that makes LaTeX default to 'standard' PostScript
fonts.  It is basically a merger of the times and the (obsolete)
mathptm packages from the psnfss suite.  You must have installed
standard LaTeX and the psnfss PostScript fonts to use this package.
The main novel feature is that the pslatex package tries to compensate
for the visual differences between the Adobe fonts by scaling
Helvetica by 90%, and 'condensing' Courier (i.e. scaling horizontally)
by 85%.  The package is supplied with a (unix) shell file for a
'pslatex' command that allows standard LaTeX documents to be
processed, without needing to edit the file.  Note that current psnfss
uses a different technique for scaling Helvetica, and treats Courier
as a lost cause (there are better free fixed-width available now, than
there were when pslatex was designed).  As a result, pslatex is widely
considered obsolete.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Add tex-mfnfss{,-doc}.

(minskim)

Import tex-mfnfss-doc-2009 as print/tex-mfnfss-doc.

This is documentation for tex-mfnfss.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Import tex-mfnfss-2009 as print/tex-mfnfss.

This bundle contains two packages: oldgerm, a package to typeset with
old german fonts designed by Yannis Haralambous, and pandora, a
package to typeset with Pandora fonts designed by Neena Billawala.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Add tex-cyrillic{,-doc}.

(minskim)

Import tex-cyrillic-doc-2009 as print/tex-cyrillic-doc.

This is documentation for tex-cyrillic.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Import tex-cyrillic-2009 as print/tex-cyrillic.

This bundle of macros files provides macro support (including font
encoding macros) for the use of Cyrillic characters in fonts encoded
under the T2* and X2 encodings.  These encodings cover (between them)
pretty much every language that is written in a Cyrillic alphabet.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Add tex-cmcyr{,-doc}.

(minskim)

Import tex-cmcyr-doc-2009 as fonts/tex-cmcyr-doc.

This is documentation for tex-cmcyr.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Import tex-cmcyr-2009 as fonts/tex-cmcyr.

These are the Computer Modern fonts extended with Russian letters, in
MetaFont sources and ATM Compatible Type 1 format.  The fonts are
provided in KOI-7, but virtual fonts are available to recode them to
three other Russian 8-bit encodings.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Add tex-lh{,-doc}.

(minskim)

Import tex-lh-doc-3.5g as fonts/tex-lh-doc.

This is documentation for tex-lh.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Import tex-lh-3.5g as fonts/tex-lh.

The LH fonts address the problem of the wide variety of alphabets that
are written with Cyrillic-style characters.  The fonts are the
original basis of the set of T2* and X2 encodings that are now used
when LaTeX users need to write in Cyrillic languages.  Macro support
in standard LaTeX encodings is offered through the cyrillic and t2
bundles, and the package itself offers support for other (more
traditional) encodings.  The fonts, in the standard T2* and X2
encodings are available in Adobe Type 1 format, in the CM-Super family
of fonts.  The package also offers its own LaTeX support for OT2
encoded fonts, CM bright shaped fonts and Concrete shaped fonts.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Add tex-ec{,-doc}.

(minskim)

Import tex-ec-doc-1.0 as fonts/tex-ec-doc.

This is documentation for tex-ec.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Import tex-ec-1.0 as fonts/tex-ec.

The EC fonts are European Computer Modern Fonts, supporting the
complete LaTeX T1 encoding defined at the 1990 TUG conference hold at
Cork/Ireland.  These fonts are intended to be stable with no changes
being made to the tfm files.  The set also contains a Text Companion
Symbol font, called tc, featuring many useful characters needed in
text typesetting, for example oldstyle digits, currency symbols
(including the newly created Euro symbol), the permille sign,
copyright, trade mark and servicemark as well as a copyleft sign, and
many others.  Recent releases of LaTeX2e support the EC fonts.  The EC
fonts supersede the preliminary version released as the DC fonts.  The
fonts are available in (traced) Adobe Type 1 format, as part of the
cm-super bundle.  The other Computer Modern-style T1-encoded Type 1
set, Latin Modern, is not actually a direct development of the EC set,
and differs from the EC in a number of particulars.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Add tex-latex-bin-doc.

(minskim)

Import tex-latex-bin-doc-2009 as print/tex-latex-bin-doc.

This is documentation for tex-latex-bin.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Add tex-pspicture{,-doc}.

(minskim)

Import tex-pspicture-doc-2009 as print/tex-pspicture-doc.

This is documentation for tex-pspicture.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Import tex-pspicture-2009 as print/tex-pspicture.

A replacement for LaTeX's picture macros, that uses PostScript
\special commands.  The package is now largely superseded by pict2e.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Let tex-psnfss{,-doc} use DISTFILES from TeX Live 2009.

No functional change.

(minskim)

Note update of tex-natbib{,-doc}.

(minskim)

Update tex-natbib{,-doc} to 8.31a.

Changes:
  v8.31a Bug fixes by Arthur Ogawa, so that the new eliding and merging features
        do not cause problems with non-REVTeX classes.
  v8.31 Bug fix: the merging features of v8.3 are supposed to be
        turned off by default but this was not completely right. With
        this bug fix, the behaviour without merging is compatible the
        earlier versions (<= 8.1).

(minskim)

Note update of tex-hyperref{,-doc}.

(minskim)

Update tex-hyperref{,-doc} to 6.80x.

Too many changes since 6.78r.  See ChangeLog in tex-hyperref-doc for the
complete list.

(minskim)

Update tex-geometry{,-doc} to 5.3.

Changes since 4.1:
  * Fixed missed initialization of \Gm@lines.
  * Fixed a bug that the papersize setting explicitly specified
    with \geometry or \usepackage in the preample didn't come to
    \newgeometry.
  * Added \mag offset adjustment for \newgeometry.
  * Added 'onecolumn' option as a shorthand for 'twocolumn=false'.
  * Changed the format of the verbose mode.
  * Fixed a bug that caused an error in 'pass' option.
  * Changing page layout mid-document.
    The new commands \newgeometry{...} and \restoregeometry allow
    users to change page dimensions in the middle of the document.
  * A new set of options to specify the layout area.
    The options specified for the area, in which the page dimensions
    are calculated, are added: 'layout', 'layoutsize',
    'layoutwidth', 'layoutheight' and so forth.
    These options would help to print the specified
    layout to a different sized paper.  For example, with 'a4paper'
    and 'layout=a5paper', the geometry package uses 'A5' layout to
    calculate margins with the paper size still 'A4'.
  * A new driver option 'xetex'.
    The new driver option 'xetex' is added. The driver auto-detection
    routine has been revised so as to avoid an error with undefined
    control sequences. Note that 'geometry.cfg' in TeXLive, which
    disables the auto-detection routine and sets 'pdftex', is no
    longer necessary and has no problem even though it still exists.
    To set 'xetex' is strongly recommended with XeLaTeX.
  * New paper size presets for JIS B-series.
    The papersize presets 'b0j' to 'b6j' for JIS (Japanese Industrial
    Standards) B-series are added.
  * Changing default for underspecified margin.
    In the previous version, if only one margin was specified,
    'bottom=1cm' for example, then geometry set the other margin with
  the margin ratio (1:1 by default for the vertical dimensions)
    and got 'top'=1cm in this case.
    The version 5 sets the text-body size with the default 'scale'
    (=0.7) and determine the unspecified margin.
  * The option 'showframe' works on every page.
    With 'showframe' option, the page frames are shown on every page.
    In addition, the new option 'showcrop' would print cropmarks showing
    the corners of the layout (the same as paper by default) on every page.
  * Loading geometry.cfg precedes processing class options.
    The previous version loaded 'geometry.cfg' after processing
    the document class options.  Now that the config file is
    loaded before processing the class options, you can change the
    behavior specified in 'geometry.cfg' by adding options into
    \documentclass as well as \usepackage and \geometry.
  * Deleted options: 'compat2' and 'twosideshift'.
    The version 5 has no longer compatibility with the previous ones.
    'compat2' and 'twosideshift' are gone for simplicity.
  * Fixed check for the definition of \AtBeginShipoutFirst.
  * Fixed \topskip adjustment so that it works when "lines" option is used.
  * Added "driver=none" option, which does nothing for driver.
  * Revised the note on "ifvtex" package.

(minskim)

Let tex-fancyhdr{,-doc} use DISTFILES from TeX Live 2009.

No functional change.

(minskim)

It seems that unixODBC 2.3.0 dosen't build drivers/driver-conf
modules default and PLIST broken now.

So, specify some configure option to build as before.

(taca)

note bozohttpd 20100510

(mrg)

update this to bozohttpd 20100510.  there's no real change here except
some compile fixes that aren't relevant for the pkgsrc (but probably
should be...)

(mrg)

Set DIST_SUBDIR using TEXLIVE_REV if it is defined.

(minskim)

Update DISTFILES of tex-carlisle{,-doc}.  No functional change.

(minskim)

Updated sysutils/lsof to 4.83

(sbd)

Update lsof to 4.83

Release Notes:

4.83            January 18, 2010
Converted Solaris 10 and above ZFS support to use the CTF
debugger library, libctf.  Code was supplied by Robert
Byrnes <Robert.Byrnes@deshaw.com>.

Corrected a typo in the testing of the LINUX_HASSELINUX
environment variable in the Configure script.  The error
was reported by Mike Frysinger <vapier@gentoo.org>.
At Mike's request made Configure script accept LSOF_RANLIB
(ranlib command), LSOF_CFGF (additional configuration flags)
and LSOF_CFGL (additional library specifications) from the
environment.

Enabled complilation of Solaris 10 lsof after a recent Sun
patch which changed the PC file system's structure. Peter
Vernam <pvernam@draper.com> reported the problem and helped
with the fix.

Made the sort of configuration CFLAGS in the CkTestDB
script impervious to locale settings.

Ported to Solaris 11, using a test system kindly provided
by David Day <dday76@gmail.com>.

Adjusted to the disappearance of <nfs/rpcv2.h> in FreeBSD
8.0-BETA1.

Changed Solaris node type lookup to a hashed method and
added some ability for it to handle duplicate vnodeop names
in /dev/ksyms.

Updated for FreeBSD 9.0-CURRENT.  Andrzej Tobola
<ato@iem.pw.edu.pl> provided a test system.  Extends the
fix to FreeBSD 6.0 and above via a Configure test and a
compile-time definition.  The need for the extension was
reported by Erik Trulsson <ertr1013@student.uu.se>>

Made corrections to FAQ typographical errors, suggested
by Josh Soref <timeless@gmail.com>.

Added __UCLIBC__ test to Linux dlsof.h so lsof would compile
on an Intel ARM XScale processor.  The addition was provided
by Doug Kehn <rdkehn@yahoo.com>.

Added test for <utmpx.h> to FreeBSD configuration.  Improved
its use in lsof.h.  The changes were supplied by Martin Wilke
<miwi@FreeBSD.org>.

4.82            March 25, 2009
Corrected an over-zealous exclusion test that caused
lsof to report nothing when it was given no arguments
and built with HASSECURITY and HASNOSOCKSECURITY enabled.
Joshua Kinard <kumba@gentoo.org> reported the bug and
supplied information for reproducing it.

Based on a report from Dan Trinkle <trinkle@cs.purdue.edu>
corrected use of <sys/utsname.h> for 32 bit Solaris 10
and above compilations.  Simultaneously eliminated a
casting complaint in arg.c and updated Configure to use
the appropriate 64 bit compilation option (-xarch=v9 or
-m64) with the Solaris Sun C compiler.

Updated for FreeBSD 7.1-PRERELEASE with information
supplied by Larry Rosenman <ler@lerctr.org>.

Updated the Darwin libproc sources with changes from
Allan Nathanson <ajn@apple.com>.  Tested them on a iMac
mini, provided by Apple Inc.  Allan also provided man
page corrections.

Updated the FreeBSD Makefile to use the ${MAKE} variable
for ZFS dnode2.c module compilation, based on a suggestion
from Alexis Ballier <aballier@gentoo.org>.

Improved the Solaris VxFS library location test, based on a
suggestion from Jason Fortezzo <fortezza@mechanicalism.net>.
Jason tested the change.

Updated Solaris 10 ZFS support for ZFS version 4 and ZFS
pool version 10, using a test system kindly provided by
Vladislav Nespor <vladislav.nespor@id.ethz.ch>.  Renata
Maria Dart <renata@slac.stanford.edu> tested on ZFS
version 4, verifying that the update works there, too.
(ZFS pool version 10 is apparently the ZFS version shipped
with the 10/08 update to Solaris.  The original ZFS
support targeted ZFS version 3.)

I still consider ZFS support in Solaris lsof a hack,
because it depends on a znode structure definition that
I developed using dbx.  Sun is remiss in not distributing
the ZFS header files used to build the distributed kernel.

Because of the znode structure definition hack, I can't
guarantee that lsof ZFS support will work for any other
versions of ZFS.

Solaris 10: adjusted to a change in the way devices are
stored in the kernel; fixed a problem in zone handling;
and added rudimentary sharedfs support.  Carson Gaspar
<carson@taltos.org> reported the device number problem,
provided a test system, and tested the changes.  Peter
Vines <psv2b@eservices.virginia.edu> reported the zone
handling problem and tested the fix.

Adapted to FreeBSD 8.0-CURRENT changes in device number
computation.  Problem was reported by Erwin Lansing
<erwin@FreeBSD.org>.  Larry Rosenman <ler@lerctr.org>
provided a test system.

Corrected Solaris Configure test for appropriate VxFS
library when using gcc to compile lsof.

Updated for loss of KAME IPv6 FreeBSD accommodations.

Adapted to FreeBSD 7.2.  Made Configure script recognized
FreeBSD 6.3.

4.81            October 21, 2008
Updated the Darwin libproc sources with changes from
Allan Nathanson <ajn@apple.com>.  Tested them on a iMac
mini, provided by Apple Inc.

Changed dummy declarations in library source files to
eliminate complaints about unused variables and empty
object files.  This change may not work on dialects I
can no longer test; it has been tested on some versions
of AIX, Darwin, FreeBSD, Linux and Solaris.

At the request of Hal Brooks <hal@uga.edu> added support
for Linux /proc/net/packet files.  Hal tested it.

Added socket file only performance enhancements to Linux
and PSTAT-based HPUX lsof.

Added htonl call around improper usage of INADDR_LOOPBACK;
report from an Apple engineer forwarded by Allan Nathanson
<ajn@apple.com>.

Adjusted for FreeBSD-8.0 change in device number handling.
The adjustment should work for FreeBSD 5 and above, should
the 8.0 change be propagated downward.  The problem was
reported by Pav Lucistnik <pav@FreeBSD.org>.  An updated
test system was provided by Erwin Lansing <erwin@FreeBSD.org>.

Reduced AIX support to version 5.3, since test systems with
older versions are no longer available to me.

At the request of Marjo F. Mercado <mmercado@xceedium.com>
and Phil Shin <pshin@xceedium.com> applied some speed
improvements to lsof, particularly when the files of
interest are /Internet files -- i.e., selected with lsof's
-i" option.  Added a two new options to assist the
improvements: 1) "-c^<command>" to tell lsof to exclude the
named command(s); and 2) "-stcp|ud>:[^]state' to tell lsof
to include in its reporting or exclude ('^') from its
reporting Internet files in the named states (e.g., LISTEN,
^CLOSE_WAIT, IDLE, etc.)  For the most part these changes
apply only to AIX, Darwin, FreeBSD, PSTAT-based HP-UX, Linux
and Solaris, since those are the only places I could test
them.  They are controlled by the HASTCPUDPSTATE definition
in each dialect's machine.h header file.  Marjo and Phil
provided HP-UX 11.23 and 11.31 test systems.

Fixed a stat(2) problem on HP-UX 11.31 while testing the
speed improvements.

Adjusted for kernel header file changes in FreeBSD
8.0-CURRENT.  Larry Rosenman <ler@lerctr.org> provided
a test system.

Added a warning for Solaris systems where VxFS node info
can't be obtained from the VxFS utility library.  The
warning was requested by Tom Matthews <Tom.MATTHEWS@rbs.com>.

Corrected mishandling of file system path name arguments
that have trailing slashes, except, of course, the root
file system, "/".  Allan Nathanson <ajn@apple.com> reported
the bug.

4.80            May 12, 2008
Updated for a FreeBSD 7.0 and above byte level locking
change.  The problem was reported by Conrad J. Sabatier
<conrads@cox.net>, who helped test the update.  Wesley
Shields <wxs@FreeBSD.org> provided an 8.0-CURRENT test
system.

Propagated the FreeBSD 7.0 and above locking changes to
FreeBSD 6.x, based on a report from Edwin Groothuis
<edwin@FreeBSD.org>.

Added warnings for unsupported dialects or versions.

Added Linux support for the UDPLITE protocol.  Eric
Dumazet <dada1@cosmosbay.com> supplied a patch.

Added a missing quote to the Configure script's
FreeBSD stanza.

Added a usage.o rule to the HP-UX PSTAT-based
Makefile.  I mistakenly deleted the rule at revision
4.79.  The missing rule was reported by Kawaljeet Kaur
<kawaljeet.malviya@gmail.com> who tested the corrected
Makefile.

4.79            April 15, 2008

**************** IMPORTANT NOTE ******************
*                                                *
* Lsof support has been reduced to the following *
* dialects: AIX, FreeBSD, Linux and Solaris, and *
* only in selected versions of those dialects.  *
* The selected versions are listed in this file  *
* and in other lsof documentation.              *
*                                                *
* I have made this move because of retirement    *
* and because I no longer have many test systems *
* available to me.                              *
*                                                *
* Vic Abell                                      *
*                                                *
**************************************************

Fixed a Solaris VXFS permission problem when accessing
the VXFS inode offsets.  The bug was reported by
Gregory A. Ivanov <ivga@mts.ru>.  Gregory tested the
fix.

Moved an #include <string.h> later in FreeBSD dlsof.h
to enable compilation on recent FreeBSD releases.  The
change was supplied by Roy Marples <uberlord@gentoo.org>.

Improved Linux /proc file stream reading speed by applying
an expanded version of a patch from Eric Dumazet
<dada1@cosmosbay.com> that allocates a page size buffer
to each stream.  Improved TCP, TCP6, UDP and UDP6 hashing
by determining the hash bucket count from the /proc/net
sockstat and sockstat6 files.  The improvement was
suggested by Eric and he provided sample code.  Eric also
tested both improvements.

Modified Configure script to build lsof on FreeBSD
6.2.  Tested it on a system provided by Larry Rosenman
<ler@lerctr.org>.

Fixed a Linux maps file processing bug that prevented path
names from having an embedded colon.  James Lingard
<jchl@arastra.com> reported the bug and helped with its
fix.

Based on reports from Eric Dumazet and Samuel Thibault
<samuel.thibault@ens-lyon.org> added support for the
Linux 2.6.22 kernel's /proc/<PID>/fdinfo files -- i.e.,
file offset and flags.  Samuel Thibault provided a test
system.

Fixed a Linux UNIX socket memory leak, reported by
Philip Shin <pshin@xceedium.com>.  Phillip supplied the
fix.

With generous assistance from HP added support for an HP-UX
11.23 patch that makes TLI/XTI socket address information
available.

Fixed a header file problem for FreeBSD 6.2 on the Alpha
architecture.  The problem was reported by Pekka Honkanen
<phonkane@cc.hut.fi>.  Pekka tested the fix.

Based on a report and using suggested fixes from Karel Zak
<kzak@redhat.com>, made these changes to Linux lsof: corrected
a getpidcon() error message; insured that inode numbers are
handled correctly for their unsigned long long type; and
improved SELinux handling.  At the request of Alon Bar-Lev
<alonbl@gentoo.org> added the LINUX_HASSELINUX environment
variable to enable or inhibit SElinux support unconditionally.

Updated Configure for FreeBSD 8.0-CURRENT and tested lsof on
AMD64 there.

Added a patch provided by Oles Hnatkevych
<don_oles@able.com.ua> for FreeBSD systems where the root
file system is on a CD9660 device.

Added compensation for the disappearance of FMARK and FDEFER
from the FreeBSD 8.0-CURRENT <sys/file.h>.

Updated FreeBSD lsof with ZFS support.  Larry Rosenman
<ler@lerctr.org>, Erwin Lansing <erwin@FreeBSD.org>, Wesley
Shields <wxs@atarininja.org> and Dmitry Morozovsky
<marck@rinet.ru> provided test systems.

Fixed a socket file identification problem reported by
Pavol Rusnak <stick@gk2.sk>.  Pavol also reported the
cause of the problem.

Added the ability to format the repeat mode marker line
with strftime(3), where the dialect supports the
localtime(3) and strftime(3) C library functions.  The
addition was suggested by Mike Depot <mdepot@comcast.net>,
who also tested it.  The addition required creating a new
main lsof source module, util.c, that contains functions
whose compilation conflicts with the general header file
tree defined by lsof.h and dlsof.h.

Based on reports from Andrei V. Lavreniyuk
<andy.lavr@reactor-xg.kiev.ua> and Pav Lucistnik
<pav@FreeBSD.org> updated the FreeBSD 7.0 and above
file lock handling to use new locking structures.  The
update requires a terrible hack to get a definition for
the lock owner structure from a kernel source module
into a local lsof header file.

(sbd)

My initial stab at fixing the Linux build was incomplete.
Apply patch from Gary Duzan (PR pkg/43276)

(tnn)

Let tex-symbol use DISTFILES from TeX Live 2009.  No functional change.

(minskim)

Note udpate of tex-txfonts{,-doc}.

(minskim)

Update tex-txfonts{,-doc} to 2009.

- Corrected an error in txbmi and txbmi1:
  "5E and "5F were accidentally switched.

(minskim)

Darwin also has NetBSD's readline.

(minskim)

Note update of tex-misc.

(minskim)

Update tex-misc to 2009.17497.

- Added bibnames.sty.

(minskim)

note bozohttpd 20100509

(mrg)

import bozohttpd 20100509.  it has these changes:
o  major rework and clean up of internal interfaces.  move the main
  program into main.c, the remaining parts are useable as library.
  add bindings for lua.  by Alistair G. Crooks <agc@netbsd.org>
o  fix http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=566325

special thanks to al for the majority of these changes.

(mrg)

Updated to version 2.2.10

        Protocol fix, potential integer error in server decoding.

(pettai)

Updated graphics/digikam to 1.2.0

(wiz)

Update to 1.2.0:

NEW FEATURES:

AlbumGUI          : All Album tree views are ported to pure Qt4 model/view implementation.

ImageEditor      : Brightness/Contrast/gamma tool is multithreaded and use a zoomable preview widget.
ImageEditor      : Color Balance tool is multithreaded and use a zoomable preview widget.
ImageEditor      : Hue/Saturation/Lightness tool is multithreaded and use a zoomable preview widget.
ImageEditor      : Auto Color Correction tool is multithreaded and use a zoomable preview widget.
ImageEditor      : Channel Mixer tool is multithreaded and use a zoomable preview widget.
ImageEditor      : Black and White tool is multithreaded and use a zoomable preview widget.
ImageEditor      : White Balance tool is multithreaded and use a zoomable preview widget.
ImageEditor      : Adjust Curves tool is multithreaded and use a zoomable preview widget.
ImageEditor      : Adjust Levels tool is multithreaded and use a zoomable preview widget.
ImageEditor      : Complete rewrite of the FilmGrain tool.
                    FilmGrain tool use now YCrCb color space to add noise. Graininess size can be adjusted
                    with an option to set-up photographic distribution of noise.
                    Different amounts of noise can be added to highlights, shadows and midtones.

BatchQueueManager : New tool to fix Brightness/Contrast/gamma.
BatchQueueManager : New tool to adjust Color Balance.
BatchQueueManager : New tool to fix Hue/Saturation/Lightness.
BatchQueueManager : New tool to convert images color space.
BatchQueueManager : New tool to mix color channel.
BatchQueueManager : New tool to convert to Black and White.
BatchQueueManager : New tool to adjust White Balance.
BatchQueueManager : New tool to adjust Curves.
BatchQueueManager : New tool to blur images.
BatchQueueManager : New tool to add Film Grain to images.
BatchQueueManager : New tool to apply Local Contrast (LDR tone mapping).
BatchQueueManager : New tool to add/remove vignetting.
BatchQueueManager : New tool to invert image colors.
BatchQueueManager : New tool to convert color bits depth.
BatchQueueManager : New tool to add border around images.
BatchQueueManager : Rotate tool support Free Rotation adjustments.
BatchQueueManager : It's now possible to Stop and restart a processed queue.

BUGFIXES FROM KDE BUGZILLA (alias B.K.O | http://bugs.kde.org):

001 ==> 223936 : Moving photos between albums is slow.
002 ==> 224698 : digiKam fails to rotate pefs via orientation tag.
003 ==> 224021 : Zoom shortcuts inconsistent between editor and preview.
004 ==> 225160 : digiKam built with QT4 ver 4.5.3 does not display pictures in album view.
005 ==> 225397 : Tip refers to "Print Wizard", it is now "Print Assistant".
006 ==> 225555 : Crash when deleting tag.
007 ==> 207244 : Image disappears when enlarging.
008 ==> 221155 : Add collection fails on similarly named directories (seems that check is not strict enough).
009 ==> 225731 : digiKam no preview icon for movie.
010 ==> 222698 : digiKam 1.0.0 crashes when editing tags by drag-and-drop.
011 ==> 225328 : Creating new album during import fails.
012 ==> 216633 : Additional aspect ratios in crop tool.
013 ==> 151406 : Filters in 'Enhance' dropdown menu lack mouse-over preview mode.
014 ==> 225698 : When I export my Album to a Html Gallery then Digikam crashed at the End.
015 ==> 225787 : Scroll wheel doesn't work while moving images.
016 ==> 226081 : Trying to delete tags crashes digiKam.
017 ==> 226118 : IPTC metadata tag delimiter is no longer stored (since 0.10).
018 ==> 226235 : digiKam fails after upgrade - no albums - rh tag & captions bar frozen.
019 ==> 225272 : digiKam destroy some exif data.
020 ==> 226584 : digiKam crashes in the starting phase.
021 ==> 226537 : hovering doesn't show sub-tags.
022 ==> 225827 : Gpswidget inactive on default selected photo.
023 ==> 226381 : Copy/Paste of images in Albums view selects wrong image.
024 ==> 224999 : Thumbnails blury after upgrade to 1.0.0 from 0.10.
025 ==> 226789 : Metadata settings only EXIF.
026 ==> 185266 : digiKam shows unknown icon when moving images to other directory.
027 ==> 226872 : Tag tree not expanded with "Tags already assigned" button.
028 ==> 226858 : digiKam 1.2 My Tags window always blank.
029 ==> 226568 : digiKam 1.1 crashes when renaming tag.
030 ==> 226515 : My tags on Caption/Tags becomes empty after removing a single tag.
031 ==> 227244 : Images on local disk not shown in middle pane.
032 ==> 226853 : No images shown after upgrading from previous version.
033 ==> 226932 : Batch Color Space Conversion Tool.
034 ==> 207338 : Batch queue manager does not cancel processing.
035 ==> 215657 : Raw import tool does not use general digiKam settings.
036 ==> 226846 : Issues with color management and color profiles.
037 ==> 227498 : digiKam no longer shows any fotos. opengl image viewer works. showFoto works.
038 ==> 226537 : hovering doesn't show sub-tags.
039 ==> 227550 : Tags already assigned looks messy.
040 ==> 226962 : Applying tags to images requires extra work.
041 ==> 226238 : Histogram never get completed in image editor after any change in the image.
042 ==> 227545 : Toggle Auto/Parents does not work as expected.
043 ==> 219772 : Opening the application causes crash.
044 ==> 226382 : Curves Adjust dialog broken: No Histogram and no effect when changing the line.
045 ==> 227555 : Preview image in digiKam is not displayed after saveas in editor.
046 ==> 225728 : Adding vignette should not increase brightness in the center.
047 ==> 227992 : Search field should not lost focus if nothing was found.
048 ==> 228326 : Crash trying to create a new tag.
049 ==> 227905 : ISO Album dates for 2009 2010 sort wrong.
050 ==> 225443 : Fileview preview panning shortcut back to old.
051 ==> 224094 : Modifying file (caption, keywords, EXIF) takes a very long time and 100 % CPU.
052 ==> 228378 : Tag filtering is bugged.
053 ==> 227668 : Not enough space to show alle tags.
054 ==> 227640 : No Pictures visible in Collections.
055 ==> 227075 : digikam3 database is not imported.
056 ==> 225927 : Add white-balance to the batch base tools.
057 ==> 225718 : Crash when having two tags with the same name in one folder.
058 ==> 221918 : Wrong thumbnails after save as.
059 ==> 226586 : digiKam 1.2 crashes after My Tags window goes blank.
060 ==> 226885 : Not displayed thumbnails failed load kio_digikamalbums.
061 ==> 226363 : Root album is not expansed after upgrade to model view port.
062 ==> 224080 : Selected image thumbnails should be automatically added to the list of images for processing in Batch Queue Manager.
063 ==> 225722 : Selection in editor should not darken image.
064 ==> 228802 : Copy paste doesn't work.
065 ==> 227064 : digiKam 1.1.0: crash on image download.
066 ==> 228807 : Dancing thumbs in album view.
067 ==> 214303 : Position of preview type buttons is inconsistent across different tools.
068 ==> 163286 : Accurate histogram preview required.
069 ==> 229287 : Crash in digiKam when renaming with directory.
070 ==> 148540 : Improvements of adding noise tool.
071 ==> 229340 : digiKam Crashes When Saving PNG Files.
072 ==> 229664 : Curves Widget not working anymore in BWSepia Plugin.
073 ==> 229574 : Moving tags doesn't update the "tag counter" next to the tag name.
074 ==> 229690 : No picture on thumb bar icon.
075 ==> 229793 : Drop image file in digiKam.
076 ==> 228483 : digiKam 1.1.0 with system libjpeg-8 breaks image rotation.
077 ==> 187431 : Gui too big for eeepc.
078 ==> 230008 : digiKam Nikon fetching pictures.
079 ==> 229470 : digiKam fails to start with QCursor: Cannot create bitmap cursor; invalid bitmap(s).
080 ==> 221992 : "local contrast" settings make no difference.
081 ==> 230003 : Zoombar slider adjustments below 100% are hard to archieve [patch].
082 ==> 228810 : Need to roll over again on a thumb to correct the rating.
083 ==> 210259 : Scan crashed on multi-layer TIFFs.
084 ==> 229344 : digiKam starting up - loading kipi-plugins.
085 ==> 229578 : Metadata is not correctly updated when just assigning tags.
086 ==> 230323 : ShowFoto and digiKam opening Olympus E-P2 ORF file will crash.
087 ==> 229108 : digiKam doesn't display all images after and upgrade.
088 ==> 201591 : Restart queue in Batch queue manager.
089 ==> 223003 : Cancelling duplicate search doesn't remove waiting cursor.
090 ==> 230358 : Selected album does not match containing items.
091 ==> 231048 : Monochrome tool shows plain grey preview.
092 ==> 222774 : Many (but not all) tags have been lost after multiple albums facility added.
093 ==> 226504 : When moving assigned tag in the keywords hierachy it becomes unassigned.
094 ==> 220415 : Clicking the + in the Album tree expands and just collapses subdirs again.
095 ==> 207881 : Album order differs in import dialog.
096 ==> 231361 : digiKam crash when trying to open NIKON NEF format photos from camera.
097 ==> 230573 : digiKam crash with import from DSL Nikon D90.
098 ==> 196470 : Update files with metadata from DB.
099 ==> 224052 : Pressing Delete repeatedly is not cached.

(wiz)

Updated www/surfraw to 2.2.7

(wiz)

Update to 2.2.7:

Thu May  6 20:20:09 BST 2010  - surfraw 2.2.7

* New elvi (surfraw now has over one hundred elvi!):
  + by tczy:
    * bing: Search using Microsoft's Bing.
  + by Ivy Foster:
    * bookfinder: Search for books using www.bookfinder.com.
    * bugmenot: Bypass compulsory web registration with bugmenot.com.
  + by Ian Beckwith:
    * duckduckgo: Search the web via duckduckgo.com.
    * scroogle: Search Google anonymously via www.scroogle.org.
  + by Simone Fittabile:
    * jamendo: Search Jamendo: free music with Creative Commons licenses
* Removed elvi: genpkg (use genportage instead).
* Fixed elvi:
  + cnn
  + imdb (thanks to Sadako)
  + bbcnews (thanks to Sumant Oemrawsingh and James Rowe)
* aur: added options (thanks to Ivy Foster)
* wikipedia, ixquick: support https. Thanks to Simone Fittabile.
* debwiki: remove -w, Debian Women wiki is being merged into main
  Debian wiki. Thanks to Simone Fittabile.
* Improved support for screen(1). Thanks to Ivy Foster:
  + Support for using tmux as $SURFRAW_screen.
  + Added `-ns|-newscreen' switch for setting $SURFRAW_new_screen.
  + Added $SURFRAW_screen_args for passing arguments to the defined
    screen tool.
* uzbl_load_url_from_surfraw: fix menu.
  Thanks to Sumant Oemrawsingh.

(wiz)

+ ImageMagick-6.6.1.7, apache-ant-1.8.1, asymptote-1.94, calibre-0.6.52,
  efax-gtk-3.2.2, emacs-23.2, farsight2-0.0.18, gnumeric110-1.10.3,
  goffice0.8-0.8.3, hdf5-1.9.68, hylafax-5.4.2, koffice-2.1.91,
  libgpg-error-1.8, libv4l-0.8.0, mc-4.7.0.5, openldap-client-2.4.22,
  p5-Module-Build-0.36080, p5-Module-Signature-0.64, p5-Mouse-0.58,
  p5-PerlMagick-6.6.1.7, p5-libwww-5.835, png-1.4.2, popt-1.16,
  qemu-0.12.4, scmgit-base-1.7.1, scmgit-docs-1.7.1, stella-3.1.2,
  surfraw-2.2.7, tor-0.2.1.26, wine-devel-1.1.44, wireshark-1.2.8,
  x264-devel-20100508, yaz-4.0.7.

(wiz)

New better documentation is available, so point to those instead

(pettai)

Fix issue with PLIST generation by not reading existing .packlist.

(morr)

dnsruby-1.46:

* DNSKEY#key= raises ArgumentError if bad key used at creation.
* Arrays of DNSKEYs allowed for verify_rrset().
* dnssec-bis-updates recommendation for NSEC and RRSIG.
* ZoneReader handles absolute binary names properly.
* Test fixes for more platforms.

(pettai)

SoftHSM 1.1.4 - 2010-04-06

* Respect --disable-64bit
* Respect $DESTDIR for config files
* The binaries can now show the version number
* softhsm-keyconv could not handle --ttl properly
* Link softhsm static with libsofthsm
* Build libsofthsm.so without version number
* libsofthsm.so is now a loadable module

(pettai)

pullup #3108

(spz)