Add destdir support

(tonio)

+ opensaml

(pettai)

Added security/opensaml version 2.3

(pettai)

OpenSAML is a set of open source C++ libraries meant to support developers
working with the Security Assertion Markup Language (SAML). OpenSAML 2,
the current version, supports SAML 1.0, 1.1, and 2.0.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(pettai)

Updated www/p5-Apache-Test to 1.31

(sno)

Updating www/p5-Apache-Test from 1.30nb1 to 1.31

pkgsrc changes:
- Add license definition

Upstream changes:
1.31 February 24, 2010
    * Modify need_cgi so that it looks for cgi.c instead of cgi. This is a
      fix for the case insensitive filesystem correction listed below.
      [Phillipe M. Chiasson]
    * t/next_available_port.t doesn't need mod_cgid, use need_cgi instead of
      need_module('mod_cgi.c') [Philippe M. Chiasson]
    * PR: 21554 Load mod_apreq2.so if it is available
      [Derek Price, <derek@ximbiot.com>]
    * Add conditional to ignore IfVersion directive if mod_version is not
      built. [Adam Prime <adam.prime@utoronto.ca>,
      Fred Moyer <phred@apache.org>]
    * PR: 41239 t/TEST -ping does not return a valid return code to the
      calling shell [ozw1z5rd <alessio.palma@staff.dada.net>]
    * Prevent infinite loop when no default apxs or httpd is present and
      repeated attempts to run the test suite under an automated harness
      (such as a cpan smoke test). Issue reported by CORION and ANDK,
      PR: 12911 [Fred Moyer <phred@apache.org>]
    * Use need_module('mod_cgi.c') and need_module('mod_cgid.c') in
      t/next_available_port.t instead of need_cgi. On case insensitive file
      systems such as OS X, need_cgi will fulfill the requirement with
      cgi.pm, when mod_cgi.c is the desired requirement.
      [Fred Moyer <phred@apache.org>]
    * Fix overridden get_basic_credentials test when using NTLM
      authentication [Rick Frankel <cpan@rickster.com>]
    * Work around a bug introduced in libwww-perl in version 5.820 for
      httpd's credentials [Gunnar Wolf <gwolf@gwolf.org>, Niko Tyni <ntyni@debian.org>]
    * Make Apache::TestConfig::untaint_path tolerate undefined arguments
      [Torsten Foertsch <torsten.foertsch@gmx.net]
    * Inherit LoadFile directives from the global httpd.conf
      [Torsten Foertsch <torsten.foertsch@gmx.net]
    * Don't overwrite php.ini if it already exists PR: 32994
      [MAHEX <MAHEX@cpan.org>]

(sno)

Added cross/mingw version 3.3.1
Added cross/mingw-binutils version 2.18
Added cross/mingw-gcc version 3.4.5
Added cross/mingw-runtime-bin version 3.14
Added cross/mingw-w32api-bin version 3.11

(asau)

Updated www/p5-HTTP-DAV to 0.40

(sno)

Updating www/p5-HTTP-DAV from 0.38 to 0.40

pkgsrc changes:
- Adjust license definition

Upstream changes:
  v0.40 (released 2010/01/27):
    *  bug fixes
  - Fixed RT #47500 (http://rt.cpan.org/Public/Bug/Display.html?id=47500),
            HTTP::DAV::Comms->credentials() method erroneously autovivified
            basic authentication internal values, causing wrong or undefined
            credentials to be sent out, or credentials to be "forgot" by HTTP::DAV.
Thanks to stoian.iovchev at imperia.bg and Glenn Fowler for their
feedback on this.

  v0.39 (released 2009/12/12):
    *  bug fixes
          - Fixed RT #52665 (http://rt.cpan.org/Public/Bug/Display.html?id=52665),
            Using dave or propfind() on URLs containing escaped chars (%xx) could fail,
            due to upper/lower case differences. Thanks to cebjyre for the patch
            and the test case.

(sno)

Updated devel/p5-Test-Reporter to 1.5600

(sno)

Updating devel/p5-Test-Reporter from 1.54 to 1.56

pkgsrc changes:
- Adding license definition

Upstream changes:
1.56      2010-03-14 23:26:00 EST5EDT
        - Convert line endings during read() [Issue identified
          by Serguei Trouchelle]

1.55      2010-03-12 11:44:05 EST5EDT
        - Preserve distfile through write() and read()
          [patch by Dan Collins]
        - Regenerate _myconfig data during read() method

(sno)

Updated devel/p5-MooseX-Role-Parameterized to 0.18

(sno)

Updating devel/p5-MooseX-Role-Parameterized from 0.17 to 0.18

Upstream changes:
0.18  March 10, 2010
    * Improve the error message when you leave off the role {} block
      http://stackoverflow.com/questions/2418177/moose-and-error-messages-the-sun-and-the-moon/2418429

(sno)

Updated devel/p5-Module-Load to 0.18

(sno)

Updating devel/p5-Module-Load from 0.16 to 0.18

pkgsrc changes:
- Correct license definition

Upstream changes:
Changes for 0.18    Tue Mar  2 15:54:30 2010
============================================
* Documentation fix from Michael Schwern RT #55123

(sno)

Updated devel/p5-Log-Any-Adapter-Log4perl to 0.06

(sno)

Updating devel/p5-Log-Any-Adapter-Log4perl from 0.05 to 0.06

Upstream changes:
0.06  Mar 11, 2010
- Fix typo in t/00-load.t - RT 54627

(sno)

Updated devel/p5-local-lib to 1.5.1

(sno)

Updating devel/p5-local-lib from 1.4.9 to 1.5.1

Upstream changes:
1.005001 2010-03-10
        - I am an idiot.

1.005000 2010-03-10
        - More robust handling of running new toolchains on older perls. This
          should sort out issues users have with bootstrapping on e.g. Solaris
          and other traditional Unices. In addition, try to find a GNU tar
          capable of dealing with @LongLink so bootstrapping doesn't fail.
        - Warnings for missing PATH/PERL5LIB (as when not running interactively)
          silenced by a patch from Marco Emilio Poleggi.
        - Start of better docs for C<--self-contained> thanks to
          markstos@cpan.org.

(sno)

Updated devel/p5-Graph to 0.94

(sno)

Updating devel/p5-Graph from 0.93 to 0.94

Upstream changes:
2010-03-13 - Release 0.94 - Jarkko Hietaniemi  <jhi@iki.fi>
* Address rt.cpan.org #43580:
  "Reversed logic on overload::StrVal() in AdjacencyMap::Vertex::__set_path"
  Had to add a new option, refvertexed_stringified.
* Address rt.cpan.org #50210:
  "Graph-0.91: bug in unionfind parameter"
  One cannot delete from a unionfind graph: now enforcing that.
* Address rt.cpan.org #48090:
  "all_reachable on directed $g->add_edges(['a','b'],['b','a'])"
  Now if there are loops, all_reachable() will include
  the initial vertices themselves.  Also all_neighbors()
  had some problems in certain cases, fixed those too.
* Address rt.cpan.org #50210:
  "Graph-0.91: bug in unionfind parameter"
  One cannot delete edges or vertices from a unionfind
  graph: now enforce that in code.
* Address rt.pcan.org #42549: "stron"
  Document that strongly connected components will include
  isolated and sink and source vertices.

(sno)

+ xmltooling

(pettai)

Added textproc/xmltooling version 1.3.3

(pettai)

OpenSAML requires this lower-level library that provides a higher level
interface to XML processing, particularly in light of signing and encryption.
This package includes two alternate library versions, one with security support,
and one so-called "lite" version without that support.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(pettai)

Updated devel/p5-Getopt-Long-Descriptive to 0.085

(sno)

Updating devel/p5-Getopt-Long-Descriptive from 0.084 to 0.085

Upstream changes:
0.085  2010-03-13
        rewrite much of the documentation

(sno)

+ mingw
+ mingw-binutils
+ mingw-gcc
+ mingw-runtime-bin
+ mingw-w32api-bin

(asau)

Import MinGW packages into "cross" category. From pkgsrc-wip project.

MinGW, a contraction of "Minimalist GNU for Windows," is a port
of the GNU Compiler Collection (GCC), and GNU Binutils, for use
in the development of native Microsoft Windows applications.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(asau)

Added biology/gromacs version 3.0.7

(asau)

DESTDIR support.

(schmonz)

DESTDIR support.

(schmonz)

DESTDIR support.

(schmonz)

DESTDIR support.

(schmonz)

DESTDIR support.

(schmonz)

DESTDIR support.

(schmonz)

DESTDIR support.

(schmonz)

DESTDIR support.

(schmonz)

DESTDIR support.

(schmonz)

DESTDIR support.

(schmonz)

DESTDIR support.

(schmonz)

Create conf-destdir.

(schmonz)

Updated devel/p5-ExtUtils-ParseXS to 2.22.05

(sno)

Updating devel/p5-ExtUtils-ParseXS from 0.22.03 to 0.22.05

pkgsrc changes:
- Adjust module type (EU::MM)

Upstream changes:
2.2205 - Wed Mar 10 18:15:36 EST 2010
Other:
- No longer ships with Build.PL to avoid creating a circular dependency

2.2204 - Wed Mar 10 14:23:52 EST 2010
Other:
- Downgraded warnings on using INCLUDE with a command from "deprecated"
  to "discouraged" and limited it to the case where the command includes
  "perl" [Steffen Mueller]

(sno)

Updated devel/p5-BSD-Resource to 1.29.04

(sno)

Updating devel/p5-BSD-Resource from 1.29.03 to 1.29.04

pkgsrc changes:
- Add license definition

Upstream changes:
2010-03-14  Jarkko Hietaniemi  <jhi@iki.fi>
* Address rt.cpan.org #53856: memory leak in get_rlimits()
* Address rt.cpan.org #53859: clarify get_rlimits() docs
* Release 1.2904.

(sno)

Remove one more php4 part.

(taca)

Remove the case of PKG_PHP_VERSION is 4.

No functional change.

(taca)

Remove PHP_VERSIONS_ACCEPTED since we don't have php4 package any more
and no need to specify PHP_VERSIONS_ACCEPTED explicitly now.

No functional change.

(taca)

Note update of these PHP pear pacakges:

mail/pear-Auth_SASL 1.0.4
mail/pear-Mail_Mime 1.6.1
net/pear-Net_SMTP 1.4.2

(taca)

Update pear-Net_SMTP package to 1.4.2.

Changelog:

Fixing header string quoting in data(). (Bug #17199)

(taca)

Update pear-Mail_Mime package to 1.6.1.

Changelog:

Bugs Fixed:
* Fix encoding of Return-Receipt-To and Disposition-Notification-To
  headers [alec]

Implemented Features:
* Implement Feature #12466: Build parameters validation [alec]
* Implement Feature #17175: Content-Description support for attachments [alec]

(taca)

Update pear-Auth_SASL to 1.0.4.

Changelog:

* Fix bug #16624: open_basedir restriction warning in DigestMD5.php [till]

(taca)

Note update of www/typolight28-translations package to 20100312.

(taca)

Update typolight28-translations package to 20100312.

Czech, Danish, Italian, Russian and Slovenian language files are updated.

(taca)

Updated www/p5-Catalyst-View-TT to 0.33

(sno)

Updating www/p5-Catalyst-View-TT from 0.32 to 0.33

Upstream changes:
0.33  2010-03-10 20:08:00
        - The "render()" method now throws a warning on exception before
          returning the exception. To silence the warning, pass 'render_die =>
          0' to the constructor. Better yet, pass 'render_die => 1' to make it
          die instead of returning the excption. This will be the default in a
          future release when unspecified. The Helper will generate new views
          with render_die => 1.

(sno)

Updated devel/p5-Scalar-List-Utils to 1.23

(sno)

Updating devel/p5-Scalar-List-Utils from 1.22 to 1.23

Upstream changes:
1.23 -- Wed Mar 10 20:50:00 CST 2010
  * Add a test file to ensure 'GETMAGIC' called once [gfx]
  * "GETMAGIC" should be called only once [gfx]
  * Use PERL_NO_GET_CONTEXT for efficiency (see perlguts) [gfx]
  * Don't care about dVAR. ExtUtils::ParseXS deals with it. [gfx]
  * t/p_max.t, t/p_min.t fail on perl5.8.1.  [tokuhirom]
  * avoid non-portable warnings
  * Fix PP::reftype in edge cases [gfx]

(sno)

Updated databases/p5-BerkeleyDB to 0.42

(sno)

Updating databases/p5-BerkeleyDB from 0.41 to 0.42

pkgsrc changes:
- Add license definition

Upstream changes:
0.42  13th March 2010
        * Added $db->Env method to retrieve the environment object from a
          database object.
        * Get the tied interface to use truncate in the CLEAR method if
          using a new enough version of Berkeley DB.

(sno)

add a few more.

(wiz)

+ proj (Hi wiz!)

(joerg)

Fix unprivileged build.

(joerg)

Workaround broken NULL definition on NetBSD 5.0 and older.

(joerg)

+ gromacs

(asau)

Import GROMACS 4.0.7 as biology/gromacs.
>From pkgsrc-wip, packaged originally by Peter Ibsen Hansen.

GROMACS is a versatile package to perform molecular dynamics,
i.e. simulate the Newtonian equations of motion for systems with
hundreds to millions of particles.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(asau)

Updated lang/py-pyrex to 0.9.8.6

(wiz)

Update to 0.9.8.6:

0.9.8.6
-------

Enhancements:

  - Check for gil when calling a function declared 'execpt *' or 'except ?'.
    Acquire gil when reporting unraisable exception.

  - Added iter2() function for 2-argument form of iter().

Bug fixes:

  - Compiler crashed if base class of extension type was incompletely
    defined.

  - Compiler crash on misspelled method name in property declaration.
    [Stefan Behnel]

  - Fixed deprecation warnings in 2.6

  - Always preserve explicit type casts for non-Python types.
    [Alexander Belchenko]

  - Added workaround for threading initialisation bug in Python 2.3.
    [Lisandro Dalcin]

  - Deleting dict item with integer key did not work. [Titus Brown]

  - Header files for cimported modules included in wrong order.
    [Stephane Drouard]

  - Don't allow a member of a ctypedef struct to reference itself.
    [Tim Wakeham]

  - Compiler crash due to attribute reference in compile-time expression.
    [Hoyt Koepke]

  - Public extension type attribute with cname didn't work.
    [Mark Ellis]

  - Memory leak related to exporting C functions. [Lisandro Dalcin]

  - Compiler crash on return outside function. [Kurt Smith]

  - Scope problem with extension types declared in pxd. [KS Sreeram]

  - Calling a builtin method of a subclass of a builtin class did not work.

  - Builtin hash() function had wrong return type. [John Arbash Meinel]

Modifications:

  - Added 'tags' to .hgignore file. [Kirill Smelkov]

  - Disallow overriding a builtin method in a subclass of a builtin class.

(wiz)

*pilot-link* updated to 0.12.5.

(wiz)

Update to 0.12.5:

This is to get 0.12.5 out with the new Calendar code so J-Pilot
can get their release out. I will be dropping a 0.12.5.1 release
shortly after this with the patches rolled up from 0.12.4 to current
pushed in.

(wiz)

Updated www/p5-URI to 1.53

(wiz)

Update to 1.53:

2010-03-14  Gisle Aas <gisle@ActiveState.com>

  Release 1.53

  Ville Skytt辰 (6):
      Remove unneeded execute permissions.
      Add $uri->secure() method.
      Documentation and comment spelling fixes.
      Fix heuristics when COUNTRY is set to "gb".
      Use HTTP_ACCEPT_LANGUAGE, LC_ALL, and LANG in country heuristics.
      POD linking improvements.

  Michael G. Schwern (2):
      Rewrite the URI::Escape tests with Test::More
      Update URI::Escape for RFC 3986

  Gisle Aas (1):
      Bump MIN_PERL_VERSION to 5.6.1 [RT#54078]

  Salvatore Bonaccorso (1):
      Suppress wide caracters warnings in iri.t [RT#53737]

(wiz)

Updated devel/p5-Test-Pod to 1.42

(wiz)

Update to 1.42:

1.42 - 2010-03-10T19:41:20
    * Fixed invalid Pod link. Thanks to Markus Sonderegger.
    * Changed license in the POD to "Same as Perl" to match the license listed in
      `META.yml`.
    * Changed `Build.PL` to require Module::Build 0.30. It already does in
      `configure_requires`, but also doing so on the `use` line helps provide
      a more useful error message in older toolchain tools that don't use
      `configure_requires`.
    * Updated `MANIFEST` so that the `README` is actually included in the
      distribution.
    * Now recognizes `.bat` files as Perl files when they contain
      "--*-Perl-*--" on the first line. Thanks to Olivier 'dolmen' Mengu辿 for
      the patch (RT #46973).
    * `all_pod_files_ok()` now operates on directories as well as files.
      Thanks to Adriano Ferreira for the patch (RT #33025).
    * Files with no POD now have " (no pod)" added to test name. Thanks to
      Adriano Ferreira for the patch (RT #34955).
    * Updated documentation to note that `.PL` files are considered Perl
      files. Thanks to Adriano Ferreira for the spot (RT #34955).
    * `all_pod_files_ok()` now lets `pod_file_ok()` set the default test name,
      rather than doing so itself. Thanks to Adriano Ferreira for the spot (RT
      #34955).

(wiz)

Updated devel/xdelta3 to 3.0y

(wiz)

Update to 3.0y; install README.

Monday, February 15, 2010

Re: 3.0y (source)

Version 3.0y fixes several regressions introduced in 3.0w related
to the new support for streaming the source file from a FIFO. This
was a long-requested feature and I'm pleased to report that now,
with the fixes in 3.0y, it appears to be working quite well.  The
upshot of this feature is that you can encode or decode based on
a compressed source file, without decompressing it to an intermediate
file. In fact, you can expect the same compression with or without
a streaming source file.

There were also reports of the encoder becoming I/O bound in previous
releases, caused by the encoder improperly seeking backwards farther
than the settings (namely, the -B flag) allowed. This is also fixed,
and there's a new test to ensure it won't happen again.

Update: The built-in support for automatic decompression of inputs
is interacting badly with the new source handling logic, results
in poor compression.

Sunday, October 25, 2009

Re: 3.0w (source)

With such a good state of affairs (i.e., no bug reports), I was
able to tackle a top-requested feature (59, 73). Many of you have
asked to be able to encode deltas using a FIFO as the source file,
because it means you can encode/decode from a compressed-on-disk
source file when you don't have enough disk space for a temporary
uncompressed copy. This is now supported, with one caveat.

When decoding with a non-seekable source file, the -B flag, which
determines how much space is dedicated to its block cache, must be
set at least as large as was used for encoding. If the decoder
cannot proceed because -B was not set large enough, you will see:

xdelta3: non-seekable source: copy is too far back (try raising
-B): XD3_INTERNAL

The stream->src->size field has been eliminated. Internally, a new
stream->src->eof_known state has been introduced. This was a big
improvement in code quality because, now, the source and target
files are treated the same with respect to external (de)compression
and several branches of code are gone for good.

(wiz)

Updated sysutils/cdrtools to 2.01.01alpha77

(wiz)

Update to 2.01.01alpha77:

All:

- Added support for DragonFly/x86_64

- Support for "pcc" on Solaris x86 was added as a first step.
The C-Compiler "pcc" http://pcc.ludd.ltu.se/ is based on the
Portable C-Comppiler from AT&T from the late 1970s. It is
under BSDl and thus offers compilation with a really free
build environment.

Note that due to a pcc bug, the autoconf results for
Large File support are incorrect. Unless you edit the file
incs/i386-sunos5-pcc/xconfig.h and manually correct the
file to contain this:

#define _FILE_OFFSET_BITS 64    /* # of bits in off_t if settable          */

You will not get working large file support.

Support for more Operating system will follow after the issues
in the compiler have been resolved.

Libfind:

- Fixed a bug in libfind/walk.c (calling strcatl() with last parameter 0
instead of (char *)0)

Cdrecord:

- Fixed a bug with INDEX 00 support for CUE files from
ExactAudioCopy

- Cdrecord no longer tries to close a session on a BD-RE media.
This is not supported in the recent MMC Standard and most drives
return a SCSI error when attempting to close such a session.

(wiz)

Updated print/mupdf to 0.0.940

(wiz)

Update to r940, minor changes.

(wiz)

Updated games/gbrainy to 1.40

(wiz)

Update to 1.40. Mark as not make-jobs-safe, since installation sometimes
fails.

Version 1.40

* 2 new logic games
* Deprecated Glade and moved to Builder
* Mouse support
* Better RTL support
* Updated and new translations
* Remove dead and legacy code
* 12 Bug fixes

(wiz)

Pullup ticket #3054.

(tron)

Updated math/gsl to 1.14

(wiz)

Update to 1.14:

* What is new in gsl-1.14:

** Upgraded to latest libtool, autoconf and automake (libtool-2.2.6b,
  autoconf-2.65, automake-1.11.1).  Fixes security hole in 'make
  dist' (see Automake CVE-2009-4029).

** Added support for "multisets", which are similar to permutations
  and combinations.  A multiset is an array of k integers in the
  range 0 to n-1 where each value may occur more than once. Multisets
  can be used to iterate over the indices of a k-th order symmetric
  tensor in n-space. (Rhys Ulerich)

** Added gsl_integrate_glfixed routines for performing fixed order
  Gauss-Legendre integration
  (Pavel Holoborodko, Konstantin Holoborodko, Rhys Ulerich)

** In the LMDER multi-dimensional fitting routines, the return code
  GSL_ENOPROG is now used instead of GSL_CONTINUE for the case where
  10 or more attempts to find a suitable trial step have been made
  without success. [bug #25383]

** The confluent hypergeometric function gsl_sf_hyperg_U (a,b,x) has
  been extended to support x < 0 for cases not involving
  singularities in 1F1(a,b,x). [bug #27859]

** The F-distribution gsl_ran_fdist_pdf now avoids unnecessary
  underflow and overflow and handles cases where n > 248. [bug
  #28500]

** The SVD routines now use a scaled version of the implicit QR method
  and compute the shift more reliably for values at the limit of
  double precision, avoiding potential NaNs. [bug #28767]

** A compile time error is emitted if the configuration stage prevents
  the functions gsl_isnan and gsl_finite from being defined.

** Added missing dereference in GSL_VECTOR_COMPLEX when not using
  GSL_RANGE_CHECK [bug #28017]

** Improved the range of gsl_sf_hyperg1F1(a,b,x) when a<0,b>0. [bug
  #28718]

** Added macros GSL_MAJOR_VERSION and GSL_MINOR_VERSION in
  <gsl/gsl_version.h>

** Improved gsl_eigen_symmv and gsl_eigen_symm to avoid a potential
  infinite loop when the tridiagonalised matrix contains very small
  values. [bug #28096]

** Added functions gsl_multifit_linear_usvd and
  gsl_multifit_wlinear_usvd for multilinear fitting without
  column-scaling of the fit matrix.

(wiz)

Updated net/yaz to 4.0.2

(wiz)

Update to 4.0.2:

--- 4.0.2 2010/03/09

wrbuf_destroy allows NULL WRBUF passed to it.

Fix CCL qualifier aliases (did not work since YAZ 2.1.56).

Add ZOOM_connection_close.

No fixed size buffers for ZOOM shell - bug #3257.

tstodr: make it work on s390 platform.

New icu iterator-functions. The new icu_iter-functions makes it possible
to use ICU chains from many threads.

yaz-client: better syntax check for show command.

(wiz)

Pullup ticket #3054 - requested by martti
ejabberd: security update

Revisions pulled up:
- chat/ejabberd/Makefile 1.17-1.19
- chat/ejabberd/PLIST 1.11
- chat/ejabberd/distinfo 1.11-1.12
- chat/ejabberd/patches/patch-aa 1.6-1.7
- chat/ejabberd/patches/patch-ad 1.5
- chat/ejabberd/patches/patch-ae 1.5
---
Module Name:    pkgsrc
Committed By:  dmcmahill
Date:          Mon Mar  8 17:30:23 UTC 2010

Modified Files:
        pkgsrc/chat/ejabberd: Makefile
        pkgsrc/chat/ejabberd/patches: patch-aa

Log Message:
use BSD_INSTALL_SCRIPT instead of BSD_INSTALL_DATA for a shell script
---
Module Name:    pkgsrc
Committed By:  spz
Date:          Thu Mar 11 06:33:04 UTC 2010

Modified Files:
        pkgsrc/chat/ejabberd: distinfo

Log Message:
updated patch -> distinfo needs an update too
---
odule Name:    pkgsrc
Committed By:  fhajny
Date:          Sat Mar 13 21:05:49 UTC 2010

Modified Files:
        pkgsrc/chat/ejabberd: Makefile PLIST distinfo
        pkgsrc/chat/ejabberd/patches: patch-aa patch-ad patch-ae

Log Message:
Updated chat/ejabberd to 2.1.3.

Changes in ejabberd-2.1.3

Client connections
* Avoid 'invalid' value in iq record
* Avoid resending stream:error stanzas on terminate (EJAB-1180)
* Close also legacy sessions that were half connected (EJAB-1165)
* iq_query_info/1 now returns 'invalid' if XMLNS is invalid
* New ejabberd_c2s option support: max_fsm_queue
* Rewrite mnesia counter functions to use dirty_update_counter (EJAB-1177)
* Run user_receive_packet also when sending offline messages (EJAB-1193)
* Use p1_fsm behaviour in c2s FSM (EJAB-1173)

Clustering
* Fix cluster race condition in route read
* New command to set master Mnesia node
* Use mnesia:async_dirty when cleaning table from failed node

Documentation
* Add quotes in documentation of some erl arguments (EJAB-1191)
* Add option access_from (EJAB-1187)
* Add option max_fsm_queue (EJAB-1185)
* Fix documentation installation, no need for executable permission
  (EJAB-1170)
* Fix typo in EJABBERD_BIN_PATH (EJAB-891)
* Fix typos in example config comments (EJAB-1192)

ejabberdctl
* Support concurrent connections with bound connection names
* Add support for Jot in ctl and TTY in debug
* Support help command names with old - characters
* Fix to really use the variable ERL_PROCESSES

Erlang compatibility
* Don't call queue:filter/2 to keep compatibility with older Erlang versions
* Use alternative of file:read_line/1 to not require R13B02

HTTP
* Add new debugging hook to the http receiving process
* Allow a request_handler to serve a file in root of HTTP

HTTP-Bind (BOSH)
* Cross-domain HTTP-Bind support (EJAB-1168)
* Hibernate http-bind process after handling a request
* Reduce verbosity of HTTP Binding log messages

LDAP
* Document ldap_dn_filter, fetch only needed attributes in search
  (EJAB-1204)
* Use "%u" pattern as default for ldap_uids (EJAB-1203)

Localization
* Fix German translation (EJAB-1195)
* Fix Russian translation

ODBC
* Fix MSSQL support, which was broken (EJAB-1201)
* Improved SQL reconnect behaviour

Pubsub, PEP and Caps
* Add extended stanza addressing 'replyto' on PEP (EJAB-1198)
* Add pubsub#purge_offline (EJAB-1186)
* Fix pubsub#title option (EJAB-1190)
* Fix remove_user for node subscriptions (EJAB-1172)
* Optimizations in mod_caps

Other
* mod_register: Add new acl access_from, default is to deny
* mod_sic: new module for the experimental XEP-0279 Server IP Check
  (EJAB-1205)
* PIEFXIS: Catch errors when exporting to PIEFXIS file (EJAB-1178)
* Proxy65: new option "hostname" (EJAB-838)
* Roster: Fix resending authorization problem
* Shared Roster Groups: get contacts nickname from vcard (EJAB-114)
* S2S: Improved s2s connections clean up (EJAB-1202)

Changes in ejabberd-2.1.2

Core
* Close sessions that were half connected
* Fix SASL PLAIN authentication message for RFC4616 compliance
* Fix support for old Erlang/OTP R10 and R11
* Return proper error (not 'conflict') when register is forbidden by ACL
* When ejabberd stops, send stream close to clients

ejabberdctl
* Check for EGID in ejabberdctl command
* Command to stop ejabberd informing users, with grace period
* If there's a problem in config file, display config lines and stop node

MUC
* Kick occupants with reason when room is stopped due to MUC shutdown
* Write in room log when a room is created, destroyed, started, stopped

PubSub and PEP
* Don't call gen_server on internal event (improves performance and
  scalability)
* Fix duplicate SHIM header in Pubsub message
* Notification messages of Pubsub node config change contained a SHIM
  header
* SubID SHIM header missing in Pubsub message with multiple subscriptions
  on the same node
* PEP: last published item not sent from unavailable users when the
  subscription is implicit (XEP-0115)
* pep_mapping not working due to Node type mismatch

WebAdmin
* If big offline message queue, show only subset on WebAdmin
* Support in user list page of WebAdmin when mod_offline is disabled
---
Module Name: pkgsrc
Committed By: martti
Date: Mon Mar 15 06:27:55 UTC 2010

Modified Files:
pkgsrc/chat/ejabberd: Makefile

Log Message:
Reset MAINTAINER.

(tron)

Added dual LICENSE (which this package has)

(pettai)

Updated print/libspectre to 0.2.4

(wiz)

Update to 0.2.4:

libspectre 0.2.4 (21 February 2010)
===================================

This is another bugfix only release in the libspectre's 0.2 series.

Documents containing embedded documents inside the prolog,
typically font resources, were not correctly rendered (Bug #25573)

Hib Eris fixed some portability issues to make libspectre build and
work on Windows (Bug #26377)

PDF exporter was broken which might cause a crash when printing some
documents (Bug #26592)

(wiz)

Updated audio/lame to 3.98.3

(wiz)

Update to 3.98.3:

LAME 3.98.3    February 27 2010

    * Rog辿rio Brito:
  o Update the debian packaging for the new release.
    * Robert Hegemann
  o The ignore-tag-errors switch had no effect when embedding
  album art, fixed.
  o Library API change: lame_decode functions are now
  obsolete but still present, please use hip_decode instead.
  The reason for this change is: lame_decode functions use
  a single global variable within the library to store
  decoder setup, hip_decode functions don't. The encoder
  now uses hip_decode internally and it is now possible to
  use clipdetect feature while reencoding mp3 to mp3.
  o Workaround for FFMPEG bug, which uses to call
  lame_encode_flush more than once in a loop.
  o Windows: program icon and version info added (when
  building with VC9)
  o Fix for Bugtracker item [ 2688413 ] lib name problem
  in Microsoft Visual Studio 6
  o Fix for Bugtracker items [ 2051870, 2423650, 2928684
  ] several small documentation issues
  o Fix for Bugtracker item [ 2723518 ] resampling in 3.98
  and 3.99alpha
  o Fix for Bugtracker item [ 2891879 ] Because of Windows
  API change, there was a problem with the prority switch.
  o Fix for Bugtracker item [ 2893101 ] Access Violation
  in BladeMP3EncDLL if UNICODE was defined.
  o Fix for Bugtracker item [ 2887359 ] Wrong length in
  ID3v2 tag when num_samples isn't set
  o Fix for Bugtracker item [ 2872590 ] LameTAG: "Music
  length" missmatch in LAME 3.98
  o Fix for Bugtracker item [ 2824296 ] wrong enc_padding
  value in LAME 3.99a and 3.98.3 (from CVS)
  o Revisiting the FhG decoder problem (FhG V1.5 build 50,
  ships with MS Windows): enabling the new-drain-code seems
  to solve that issue better, than restricting the buffer
  size (see below: 3.98 beta 1, May 16 2007).
  o Patch submitted by Bernhard Doebler, tracker item [
  2807676 ] Error when building Lame with NASM support
  o Patch submitted by Mancuso Raffaele, tracker item [
  2406420 ] compile lame_enc.dll under cygwin

(wiz)

Remove list of sourceforge hosts and instead use load balancer.

Direct links to the hosts were redirected to the load balancer anyway,
and this way pkgsrc users won't all hammer the same mirror (first
in list).

(wiz)

Note update of monotone{,-el,-server} to 0.47.

(jmmv)

Update to 0.47: use the 0.47 distfile and depend on monotone 0.47.

(jmmv)

Update to 0.47: use the 0.47 distfile and depend on monotone 0.47.

(jmmv)

Update monotone to 0.47:

Changes

- The default '<unknown>' author used by the git_export command has
  changed to 'Unknown <unknown>' and must be changed in existing author
  map files. The old '<unknown>' author will be rejected by the new
  validate_git_author lua hook.

- The 'git_export' command now validates all git author and committer
  values using a new 'validate_git_author' lua hook before they are
  written to the output stream. The export will fail if any value is
  rejected by this hook.

- The 'git_export' command now calls a new 'unmapped_git_author' lua
  hook for all git author values not found in the author map file. The
  default implementation of this hook attempts to produce valid git
  authors using several default pattern replacements.

- The 'get_date_format_spec' lua hook now has an additional parameter
  which hints at the wanted format (f.e. a short date or a long date
  time). The default implementation now returns '%x' for short and
  long dates, '%X' for short and long times (currently unused) and
  '%x %X' for short and long date times.

- The options '--date-format' and '--no-format-dates' are no longer
  specific to the 'log' command, but can now be used globally.

- monotone now prompts only three times for a key password.

New features

- Added portuguese translation (thanks to Am辿rico Monteiro)

Bugs fixed

- 'passphrase' now allows an empty new password to be given
  (fixes monotone bug #28809)

- 'automate remote' and 'automate remote_stdio' no longer
  require an existing database (fixes monotone bug #28885)

- monotone no longer throws an exception on Windows if it is
  interrupted (^C); a couple of other bug have been fixed for this
  platform as well which generally improve the compatibility.

- The annotation of 'annotate' is now localized.

- The various occurrences where a revision is described by its
  certs now come with proper localized date output.

- Fix problems with newer Lua versions especially when
  LUA_COMPAT_VARARG not set.

Other

- Roster handling has been sped up significantly, and roster cache
  performance has been fixed for the case of overly large rosters.
  This should be mostly noticable when digging through history
  (especially initial pulls, since those send so many revisions),
  and be more noticable for projects with larger trees.

  The most significant internal change from this is that rosters and
  marking_maps are now copy-on-write. A longer overview of the internal
  changes is at:
  http://lists.gnu.org/archive/html/monotone-devel/2010-02/msg00043.html

- Improve the compatibility with newer Botan versions.

(jmmv)