Updating package for p5 module File::Next from 1.02 to 1.06

pkgsrc changes:
  - Adding license (perl5 license)

Upstream changes:
1.06    Tue Aug  4 15:10:34 CDT 2009
    [FIXES]
    Fixed closing =cut in POD.

    There are no functionality changes, but the lack of a closing
    =cut meant that ack would not build properly.

1.04    Fri Jul 31 16:24:36 CDT 2009
    [ENHANCEMENTS]
    It's never been correct to call File::Next::files() as a method,
    as File::Next->files().  Now, if you do, files() will die with
    an error.  This is also the case with dirs() and everything().
    Thanks to Eric Lyons for reporting.

    Tiny directory reading speedups.

    [DOCUMENTATION]
    Updated URLs for support sites.

    Added a little note about the follow_symlinks=>0 being a speed
    hit.

(sno)

Updated devel/p5-File-Find-Rule-Perl to 1.09

(sno)

Updating package for p5 module File::Find::Rule::Perl from 1.08 to 1.09

pkgsrc changes:
  - Adjusting dependencies according to META.yml

Upstream changes:
1.09 Thu 30 Jul 2009
- 1.08 broke Windows. This unbreaks it again (ADAMK)

(sno)

Updated devel/p5-ExtUtils-Install to 1.54

(sno)

Updating package for p5 module ExtUtils::Install from 1.52 to 1.54

pkgsrc changes:
  - Adding perl5 license

Upstream changes:
1.54

This is a "no-change" version bump because I pushed the v1.53 change
and then realized that MakeMaker.t was a bad name for a file that would
end up in core where the EUMM tests and the EUI tests are in the same
directory. This renames it to InstallWithMM.t.

1.53

Final stage of the divorce from EUMM. Now the EUMM related tests are no
longer shared. Build.pl and Build.t go, and there shall be peace on earth.
At least until somebody patches EUMM/t/basic.t for something EUI related...

Thanks to M. Schwern for helping me work this one out. Cheers man.

1.52_03

Missed the t/Installed.t test from core. Bumped version number to allow
a new distro to be released.

1.52_02

Make _chmod verbose message use octal modes, thanks to BDFOY

Further changes from core, including lastest test file infrastructure
from EUMM.

Fixed a number of problems in ExtUtils::Installed, for various reasons
this includes a version bump to 1.999_001, which will eventually become
version 2.0. These problems related to finding modules that were installed
with either INSTALL_BASE or PREFIX. Hopefully this resolves these issues.

1.52_01 (core only release)

Changes from Core:

commit 3d55b451d9544fbd4c27c33287b76bee30328830
Author: John Malmberg
Date:  Sun Feb 15 09:25:10 2009 -0600

    ExtUtils::Install VMS extended character set support

    Preview from https://rt.cpan.org/Ticket/Display.html?id=42149

(sno)

Updated devel/p5-AutoLoader to 5.69

(sno)

Updating package for p5 module AutoLoader from 5.68 to 5.69

pkgsrc changes:
  - Adding license (perl5 license)

Upstream changes:
5.69  Sat Aug  8 12:33 2009
  - CPAN distribution upgrade: Add resources section to META.yml.

(sno)

Updated devel/p5-Attribute-Handlers to 0.86

(sno)

Updating package for p5 module Attribute::Handlers from 0.85 to 0.86

Upstream changes:
0.86 Sat Aug  8 12:41:00 CET 2009
        - Add resources (bugtracker, ...) section to META.yml

(sno)

Updated devel/p5-B-Hooks-OP-PPAddr to 0.03

(sno)

Updating package for p5 module B::Hooks::OP::PPAddr from 0.02 to 0.03

pkgsrc changes:
  - Adding license (perl5 license)
  - Adjusting dependencies according to META.yml

Upstream changes:
0.03  Tue, 28 Jul 2009 08:14:09 +0200
  * Require ExtUtils::Depends 0.302.

(sno)

bump PKGREVISION for icu dependency change

(drochner)

Updated devel/p5-prefork to 1.04

(sno)

Updating package for p5 module prefork from 1.03 to 1.04

pkgsrc changes:
  - Adding license (perl5 license)

Upstream changes:
1.04 Sun 12 Jul 2009
- Upgrading to Module::Install::DSL 0.91
- Sometimes there is no Config_heavy.pl
- Updating dependencies to rid myself of memory leaks

(sno)

oops, shlib major changed in last update, adjust dependency,
addresses PR pkg/41855 by Robert Elz

(drochner)

Updated textproc/p5-YAML-Tiny to 1.40

(sno)

Updating package for p5 module YAML::Tiny from 1.39 to 1.40

pkgsrc changes:
  - Adding license (perl license)

Upstream changes:
1.40 Fri 31 Jul 2009
- Dear Ruby Community.
  Thank you so much for your bug report to the "Ruby Talk" mailing list
  regarding the lack of true/false support in Perl YAML modules.
  http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-talk/169943
  This flaw has now been resolved, around 2 hours after we
  were made aware of it. Next time, we recommend you report these bugs
  to the people who can actually fix your problem.

(sno)

LOWER_OPSYS is not the right thing here.

(tnn)

Updated devel/p5-Parse-CPAN-Meta to 1.40

(sno)

Updating package for p5 module Parse::CPAN::Meta from 1.39 to 1.40

Upstream changes:
1.40 Sat 25 Jul 2009
- Add core perl 5.10.1's uupacktool.pl
- Repackage t/data/utf_16_le_bom.yml as ASCII for
  https://rt.cpan.org/Ticket/Display.html?id=47844

(sno)

Updated textproc/libyaml to 0.1.2

(wiz)

Update to 0.1.2, set LICENSE.
No Changelog found.

(wiz)

Updated devel/p5-Parse-Method-Signatures to 1.003010

(sno)

Updating package for p5 module Parse::Method::Signatures from 1.003009 to
1.003010.

Upstream changes:
1.003010 - 2009/07/30
  - Make it work with upcomming PPI 1.204

(sno)

Set LICENSE to mit.

(wiz)

Updated textproc/py-yaml to 3.08

(wiz)

Update to 3.08, depend on libyaml.

3.08 (2008-12-31)
-----------------

* Python 3 support (Thank to Erick Tryzelaar).
* Use Cython instead of Pyrex to build LibYAML bindings.
* Refactored support for unicode and byte input/output streams.

3.07 (2008-12-29)
-----------------

* The emitter learned to use an optional indentation indicator
  for block scalar; thus scalars with leading whitespaces
  could now be represented in a literal or folded style.
* The test suite is now included in the source distribution.
  To run the tests, type 'python setup.py test'.
* Refactored the test suite: dropped unittest in favor of
  a custom test appliance.
* Fixed the path resolver in CDumper.
* Forced an explicit document end indicator when there is
  a possibility of parsing ambiguity.
* More setup.py improvements: the package should be usable
  when any combination of setuptools, Pyrex and LibYAML
  is installed.
* Windows binary packages are built against LibYAML-0.1.2.
* Minor typos and corrections (Thank to Ingy dot Net
  and Andrey Somov).

3.06 (2008-10-03)
-----------------

* setup.py checks whether LibYAML is installed and if so, builds
  and installs LibYAML bindings.  To force or disable installation
  of LibYAML bindings, use '--with-libyaml' or '--without-libyaml'
  respectively.
* The source distribution includes compiled Pyrex sources so
  building LibYAML bindings no longer requires Pyrex installed.
* 'yaml.load()' raises an exception if the input stream contains
  more than one YAML document.
* Fixed exceptions produced by LibYAML bindings.
* Fixed a dot '.' character being recognized as !!float.
* Fixed Python 2.3 compatibility issue in constructing !!timestamp values.
* Windows binary packages are built against the LibYAML stable branch.
* Added attributes 'yaml.__version__' and  'yaml.__with_libyaml__'.

(wiz)

Add buildlink3.mk file.

(wiz)

Updated devel/p5-version to 0.7701

(sno)

Updating package for p5 module version from 0.7600nb1 to 0.7701

pkgsrc changes:
  - Setting license to perl5 license

Upstream changes:
2009-07-28  John Peacock <jpeacock@cpan.org>

Little jog to make sure META.yml does't contain UNIVERSAL

2009-07-28  John Peacock <jpeacock@cpan.org>

Only replace use_ok() if running with Test::More < 0.48

2009-07-28  John Peacock <jpeacock@cpan.org>

Provide replacement use_ok to make the 02derived.t tests pass.

2009-07-28  John Peacock <jpeacock@cpan.org>

Fix for https://rt.cpan.org/Ticket/Display.html?id=48268

2009-07-26  John Peacock <jpeacock@cpan.org>

Script to run through all of the Perl releases in one go

2009-07-26  John Peacock <jpeacock@cpan.org>

Release 0.77 to CPAN without the warning change, for release with 5.10.1

2009-07-24  John Peacock <jpeacock@cpan.org>

Finally complete the POD rewrite.  Change the behavior to throw a
warning if you try and use a v-string without a leading 'v' in a
version object declaration (this may get pulled) and rewrite the POD
to follow the New World Order.

2009-07-24  John Peacock <jpeacock@cpan.org>

Resolves https://rt.cpan.org/Public/Bug/Display.html?id=48135

2009-07-22  John Peacock <jpeacock@cpan.org>

Forgot to bump this.  Always run tests before committing!

2009-07-22  John Peacock <jpeacock@cpan.org>

Revised version::Internals POD; bump $VERSION for potential last CPAN
release.

2009-07-22  John Peacock <jpeacock@cpan.org>

WIP for version::Internals

2009-07-21  John Peacock <jpeacock@cpan.org>

Don't need to load the class in order to check whether it contains package or  assignments.

2009-07-18  John Peacock <jpeacock@cpan.org>

Rename Extended to Dotted-Decimal

2009-07-18  John Peacock <jpeacock@cpan.org>

Rename "Numeric" to "Decimal"

2009-07-18  John Peacock <jpeacock@cpan.org>

Fix for RT#47980.  Don't check $@ if you haven't actually done the eval().

2009-07-16  John Peacock <jpeacock@cpan.org>

Apply David Golden's suggested changes with some minor massaging.

2009-07-15  John Peacock <jpeacock@cpan.org>

Another CPAN alpha release.

2009-07-15  John Peacock <jpeacock@cpan.org>

Start reworking the Internals documentation into something useful.

2009-07-14  John Peacock <jpeacock@cpan.org>

Tweakage of POD

2009-07-10  John Peacock <jpeacock@cpan.org>

Neglected to delete this directory from the repo

2009-06-29  John Peacock <jpeacock@cpan.org>

Allow the pure Perl version module to be installed on Perl 5.10.0,
and trump the core code.

2009-06-28  John Peacock <jpeacock@cpan.org>

Better heuristic for deciding when to rebless

2009-06-28  John Peacock <jpeacock@cpan.org>

Remove old file from MANIFEST

2009-06-28  John Peacock <jpeacock@cpan.org>

Convert this test to make its own Empty class

2009-06-28  John Peacock <jpeacock@cpan.org>

Missed a couple more MAGIC NUMBERS in the tests.

2009-06-28  John Peacock <jpeacock@cpan.org>

Tests all pass now in 5.005_04 in XS mode too!
Need to adapt the pure Perl release to work with 5.10.0 as well.

2009-06-27  John Peacock <jpeacock@cpan.org>

Whitespace differences from blead

2009-06-27  John Peacock <jpeacock@cpan.org>

Sync changes from bleadperl to vutil.c

2009-06-26  John Peacock <jpeacock@cpan.org>

Finally have all tests passing in 5.10.0!

2009-06-23  John Peacock <jpeacock@cpan.org>

Disable all tests for 5.10.0 for the moment, so we can release
as an alpha and not falsely claim success or failure.

2009-06-13  John Peacock <jpeacock@cpan.org>

Fix RT#46921 - locale and eval action at a distance.  All tests pass
except on 5.10.0 (because the core code is broken).

2009-06-13  John Peacock <jpeacock@cpan.org>

Fix mistaken regex to convert large exponential numbers to non-exponential
form before scanning.  Resolves:

https://rt.cpan.org/Ticket/Display.html?id=45241

2009-05-27  John Peacock <jpeacock@cpan.org>

More fiddling with the revised POD.

2009-05-20  John Peacock <jpeacock@cpan.org>

Resolve some more misleading warnings from vpp.pm in 5.005 and 5.6

2009-05-20  John Peacock <jpeacock@cpan.org>

Misplaced #endif caused 5.005_04 and 5.6.x to fail tests.  Add
documentation for is_qv.

2009-05-18  John Peacock <jpeacock@cpan.org>

Make all test pm files use File::Temp.  Change qv() to be both method and
function.  All tests pass using Build.PL from perl 5.6.x forward, but
a couple of test failures using Makefile.PL in 5.6.x and 5.005_04.

2009-05-16  John Peacock <jpeacock@cpan.org>

Tests pass but POD is incomplete

2009-05-10  John Peacock <jpeacock@cpan.org>

All tests pass in all Perl's and in XS and pure Perl.  Perl 5.005_04 still
throws lots of stupid warnings in pure Perl; can't help it apparently.

2009-05-10  John Peacock <jpeacock@cpan.org>

Now tests all pass on 5.005 as well (two warnings I can't prevent)

2009-05-10  John Peacock <jpeacock@cpan.org>

Now all three test files are 100% for 5.8.x and 5.10.x, but 01 and 02 fail
with 5.6.x and 5.005

2009-05-09  John Peacock <jpeacock@cpan.org>

Begin massive reorg/redesign.  Tests 01 and 03 are 100%; 02 needs work.

(sno)

Updated devel/p5-aliased to 0.30

(sno)

Updating package for p5 module aliased from 0.22nb1 to 0.30

pkgsrc changes:
  - Setting license to perl5 license
  - Setting module type to Module::Build

Upstream changes:
0.30  5 August, 2009
      Applied changes from Florian Ragwitz to ensure that we preserve the
      name of the package the alias is defined in.

(sno)

Updated devel/p5-Date-Calc to 5.6

(sno)

Updating package for p5 module Date::Calc from 5.4nb3 to 5.6

pkgsrc changes:
  - Adding license (perl5 license, according to module's doc)
  - Adjust dependencies according to META.yml
  - Removing obsoleted deletion of formerly included Carp::Clan

Upstream changes:
Version 5.6  28.07.2009

+  Made the module MacOS X compatible
+  Made some tiny changes to the documentation

Version 5.5  was skipped due to an unauthorized upload by someone else

(sno)

Updated devel/p5-Bit-Vector to 6.7

(sno)

Updating package for p5 module Bit::Vector from 6.6 to 6.7

pkgsrc changes:
  - Re-add dependency to devel/p5-Storable - desired version will be in
    Perl CORE not before 5.10.1

Upstream changes:
Version 6.7  08.08.2009
+  Replaced STORABLE_thaw by STORABLE_attach

(sno)

Updated editors/tomboy to 0.14.3

(wiz)

Update to 0.14.3:

Version 0.14.3
* Fix build for those with gnome-sharp < 2.23.90 (Stefan Schweizer).
* Fix HTML Export add-in on Mac OS X.
* Translation updates: el, es

(wiz)

Updated net/yaz to 3.0.47

(wiz)

Update to 3.0.47:

--- 3.0.47 2009/07/08

Function yaz_xml2query allows a diagnostic element in the PQF XML
representation .. diagnostic@code and diagnostic@addinfo is diagnostic
code and additional info respectively.

The BER BOOLEAN is now the integral type Odr_bool which still happens
to be an 'int'. The BER INTEGER which used to be a plain 'int' is now
typedef'd to Odr_int. This is still an integral 'int', but it may be
changed to 64-bit via a one-liner in nmem.h (NMEM_64=1). The documentation,
ASN-1 compiler as well as programs has been updated to use the new types.

--- 3.0.46 2009/06/08

zoom: ZOOM_record_get now renders OPAC records when type=xml. Previously
only the bibliographic record was rendered. For type=opac, an OPAC
record is only returned if it is present.

iconv: small fix for encoding of advancegreek.

yaz-client: avoid double display of SRU/SRW records (bug #2798).

yaz-client: option auto_reconnect=on really reconnects.

yaz-client: fix bug #2770 - avoid length limit for auth parameters.

server: avoid null ptr ref for for yaz_poll errors.

build: fix RPM build for RHEL 5.3.

comstack: prefer IPV6 addresses over IPV4 - should refix bug #2350

(wiz)

Updated *pilot-link* to 0.12.4.

(wiz)

Update to 0.12.4:

Last-minute fixes before releasing 0.12.4

Fix for Sony SJ-22 device sync (fixes bug #1957 filed at
bugs.pilot-link.org)

Updated documentation to reflect a cleaner layout and output
(closes bug #1913 in the bugtracker at bugs.pilot-link.org

Integrate jpilot's contacts support. See
http://lists.pilot-link.org/pipermail/pilot-link-devel/2009-February/001762.html

Adding CalendarDB support to pilot-link

Adding minor tweak for m4 macro optimizations

Minor fix for a buffer size miscalculation (from Nicholas Piper)

Adding missing newline at the end of the file.

pi-debug.h, pi-threadsafe.h: Cleaning up unnecessary references
to config.h here.

Added pi-md5.h.in

generates pi-md5.h

Now autogenerated from pi-md5.h.in

Add minor fix for reported segfault when closing down bluetooth
connection.  This closes bug #1872

UINT32 was broken on 64-bit systems.  This should fix it on most
systems.

Increment ChangeLog to test/validate an LDAP permission issue
with LockDir

Implementing a Zire 22 fix from Tom Billiet

Bump for 0.12.4

Added Aaron's fixes (oof! This has been in the queue for awhile.
Sorry Aaron). This closes bug #1448.

(wiz)

Updated misc/orca to 2.26.3

(wiz)

Update to 2.26.3.

2.26.3 - 29-Jun-2009

General:

* Fix for bug #511468 - Ekiga chat window accessibility problem

* Fix for bug #574221 - left-pane in Ekiga's preference box can't be
  read at start-up

* Fix for bug #586890 - Orca 2.27.3 and earlier will crash if liblouis
  1.6.2 python bindings are installed

OpenOffice/StarOffice:

* Fix for bug #583811 - Doing a select all in OOo Writer causes Orca
  to say "selected" for each paragraph

Thunderbird:

* Fix for bug #584837 - Find dialog fails to move caret to desired
  location in Thunderbird

* Fix for bug #568658 - Sometimes Orca announces the wrong subject in
  Thunderbird.  This change causes us to dump the pyatspi cache if
  we're in Thunderbird and exit flat review. As a result, we should
  not have bogus table data hanging around.

Firefox:

* Fix for bug #530784 - whereAmI info for list items in web content
  needs to be improved

* Fix for bug #577900 - Blank lines in Firefox text areas incorrectly
  spoken

New and updated translations (THANKS EVERYONE!!!):

  See also the overall translation status:
  http://l10n.gnome.org/module/orca

    cs      Czech                Lucas Lommer

(wiz)

Updated www/lynx to 2.8.7

(wiz)

Update to 2.8.7:

New features (some are compile-time options):

    * add session save/restore feature
  o bind ^X to toggle view of page showing session information
  o add binding for ^U to previous-document (outside of
  line-editing).
  o documented command-line options and configuration data
  for this feature.
  o document -child_relaxed option in Lynx users's guide.
    * add -passive-ftp option.
    * add -child_relaxed option.
    * add "read_timeout" to lynx.cfg, and -read_timeout option to
    command-line
    * add -show_cfg option.
    * add LYNX_HELPFILE environment variable to allow override of
    location of the help-file
    * add NO_PAUSE setting to lynx.cfg, .lynxrc and Options menu
    * implement a LONG_LIST equivalent for ftp, configurable as
    FTP_FORMAT
    * add XWINDOWS / NON_XWINDOWS environment-variable field to
    DOWNLOAD, etc., in lynx.cfg to specify whether a downloader
    (printer, etc) is enabled when the X display variable is set
    * configure script improvements
  o add --with-mime-libdir option to set MIME_LIBDIR in
  userdefs.h file
  o add --with-destdir configure option to set a default
  value for the DESTDIR variable in makefiles, and modified
  makefiles to ensure that setting DESTDIR in the top-level
  makefile propagates to lower levels
  o add --enable-local-docs option to link doc-directory
  from help-page
  o add --enable-ascii-ctypes option to enable EXP_ASCII_CTYPES

Other enhancements:

    * improve SSL support:
  o improve X.509 certificate validation This is tested
  for OpenSSL, ifdef'd to not break gnutls. Changes:
+ peer certificate is cached, no need to call
SSL_get_peer_certificate() twice
+ support foo.domain:port and [ip.add.re.ss] and
[ip.add.re.ss]:port and [i:p:v:6:ad:dr:es:s] and
[i:p:v:6:ad:dr:es:s]:port
+ add support for checking X.509v3 SubjectAltName
extensions (of type DNS - tested - and IP - untested)
when the X.509 commonName check fails.
+ when displaying a list of failed CNs, change
format from foo:bar:baz to
CN{foo}:CN{bar}:CN{baz}:SAN{DNS=foo}:SAN{IP=1.2.3.4}
so that we know where what comes from (in "Your
recent statusline messages")
+ if the peer certificate can *NOT* be verified,
output a message to the log as well
+ fix a possible use of an uninitialised value
ssl_all_cns
+ output certificate issuer to the logs as well
(so that you can, before entering your online
banking PIN, see if the certificate has been issued
not only _to_ your bank but also _from_ a place
you trust, in case /etc/ssl/certs/ contains a lot
of Root CA certs)
  o add support for the X.509 extension subjectAltName
  using GNUTLS.
  o log SSL/TLS (HTTPS connection) X.509 certificate issuer
  information into the "recent statusline messages"
  (accessible via the backspace key)
  o add TNS SNI support for the OpenSSL configuration
  o modify CF_SSL configure macro to check for -ldl needed
  for recent OpenSSL versions
  o modify CF_SSL configure macro to build with MSYS for
  MinGW configuration
  o extend configure macros CF_SSL and CF_GNUTLS to check
  for pkg-config, using that for the default if the
  corresponding openssl or gnutls packages are installed.
  o add configure --with-nss-compat option, for building
  with NSS library's OpenSSL-compatible interface
  o add SSL_CERT_FILE to lynx.cfg
  o rewrite strcasecomp_asterisk() to support wildcards as
  in RFC 2818
  o add --enable-gnutls-compat configure option and associated
  files to configure with GNU TLS without its gnutls-openssl
  library, whose newer versions are available only under
  a restrictive license.
  o fix src/tidy_tls.c X509_get_issuer_name to actually
  take the issuer DN of the present certificate and not
  hope that it is the same as taking the subject DN of the
  "next" certificate which may or may not exist.
    * improve HTML interpretation:
  o update Lynx's tables of HTML attributes to cover (except
  for events) the keywords from HTML 4.01
  o use RFC-822 encoding for filenames passed via file-upload
  forms.
  o provide navigation to script-buttons, to make them more
  visible, showing their name
  o add "Bad HTML messages" to Options menu, letting the
  user disable the warning message, write the detailed
  messages to the LYNXMESSAGES: status buffer.
  o remove "Bad HTML" warning for buttons outside a form,
  since those can be inline, according to the HTML 4 DTD
  o correct check for default type of HTML BUTTON, which
  is "submit". The code treated this as "button".
  o implement "readonly" attribute for TEXTAREA and TEXT
  fields
  o accommodate (in)compatibility "feature" in HTML5 draft
  which replaces ISO-8859-1 with Windows-1252, as indicated
  here.
  o add support for HTML5 rel=author in link.
  o modify SGML_write() to check for UCS-2 BOMs, to provide
  support for UCS-2 pages.
  o modify SGML_write() to check for UTF-8 BOM, using that
  as a hint to set the default document charset to UTF-8.
  o parse xml processing-instruction to turn on UTF-8
  decoding, as well as disable upper/lower case transforming
  in source view.
  o parse doctype for xhtml, to tell when empty tags such
  as "<textarea />" can be discarded
  o translate named entities, etc., for "content" field of
  refresh-URL.
  o add switch -xhtml-parsing and lynx.cfg XHTML_PARSING
  setting to control whether the extensions for XHTML 1.0
  are used.
  o modify Lynx's DTD information to allow it to display
  form-related tags that are inline, even without being in
  a form as indicated in

    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd

    for %inline.forms and %misc.inline.
    * improvements to character sets and display:
  o improve drawing of menus for multibyte characters by
  changing the way the number of fill-characters is computed
  in LYpaddstr
  o fix some uses of gettext in options menu and info page
  where a translated string might contain angle-brackets
  or ampersand
  o modify popup for externals added in 2.8.4dev.20 to
  number the entries if keypad mode is set to one of the
  numbered forms
  o ie multibyte editing of text-fields.
    * improvements to color-style:
  o bug-fixes only
    * improve interaction with user:
  o remove check for -dump option from HTHandleAuthInfo(),
  allowing Lynx to -dump or -source NNTP urls
  o change the phase during which "-help" option is processed,
  to allow it to reflect the configured values of the options
  in the help-message
  o check if there is piped-in data when starting without
  "-" or "-stdin" options, warn about the ignored input
  data in that case.
  o add ncurses scroll-wheel support, which requires the
  extended-mouse configure option of ncurses.
  o modify initial active link in download-page to be the
  first download action rather than the "help" link whided
  in Novice mode.
  o make the size of LYNXMESSAGES configurable in lynx.cfg
  with STATUS_BUFFER_SIZE
    * improve interaction with other programs:
  o discard anchor's post_data field in HTLoadDocument()
  if Lynx is about to reload a do. That would happen if
  the result of the form includes a link back to the form.
  Removing the data causes Lynx to prompt the user, e.g.,

    Resubmit POST content to
    http://localhost/cgi-bin/lynxtest.pl ? (y/n)

    to offer the user the choice between revisiting form
    or re-POST'ing the data that was on the form
  o pass a newline after the start of PRE-section in
  HTGopher.c to force the first newline between records to
  be seen and cause the lines to split
  o add POSITIONAL_EDITOR setting to configure editors
  which accept a "+line" parameter
  o modify external editing of TEXTAREA to not do
  tab-conversion.
  o modify behavior of "-nonumbers" option for -dump so it
  can be combined with -listonly to obtain a list of the
  URLs without reference numbers.
  o implement "chunked" transfer-encoding to work with
  servers that ignore the version number in HTTP get's
  o add an Options menu checkbox to tell if Lynx should
  send a user-agent string. Unless the useragent restriction
  is set, the default for this checkbox is off, so that
  Lynx will not send the string. The corresponding setting,
  send_useragent, may be saved to ~/.lynxrc, but normally
  is not.
  o change default for configure --enable-ascii-ctypes to
  true.
  o modify exit code when doing a "-dump" to exit with
  error if the server returned an error status for the
  page.
    * improve cookie support:
  o modify cookie-writing to not write if no cookies were
  read from the file and none are available.
  o adapt/extend parsdate.y from tin to improve parsing of
  cookie expiration times.
    * improvements to debug/traces:
  o change initialization of trace file, handing this during
  the first part of argument parsing along with -help and
  -version, to show steps done for initialization of
  presentors, etc
    * improvements to scripting/logging:
          o bug-fixes only
    * other improvements:
  o build/install "en" po file so that GNU gettext LANGUAGE
  environment variable can find the corresponding English
  message file.
  o if iconv_open() using transliteration fails, retry
  without the transliteration feature.
  o improve change for UCSetBoxChars() from 2.8.6dev.16
  for EXP_CHARTRANS_AUTOSWITCH which assumed that the
  line-drawing character set was always different from the
  display character set. If both are US_ASCII for example,
  ASCII lines would be drawn, which is not good
  o modify scanning of floats from lynx.cfg to allow Lynx
  to read POSIX values in non-POSIX locales
  o replace BROKEN_PROFTPD and BROKEN_WU_FTPD logic with
  configurable list of strings in lynx.cfg, i.e.,
  BROKEN_FTP_RETR and BROKEN_FTP_EPSV, and add "spftp/" to
  the predefined values for the former.
  o modify to handle a special case where the content-type
  is given as one of the compressed types, to check if the
  address (after stripping the file suffix for that
  compression) has a suffix that lynx could present For
  example:

            http://foo/bar.html.gz

    would display the uncompressed "bar.html" rather than
    offering to download the file. This also allows one to
    add SUFFIX commands to lynx.cfg to display the
    corresponding plain files. For example:

            SUFFIX:CHANGES.*:text/plain:8bit
            SUFFIX:CHANGES:text/plain:8bit

            for

            http://foo/CHANGES.tmp.gz
            http://foo/CHANGES.gz

          o fix ipv6 literal command-line parsing.
          o setup locale before writing version-message.

New/improved sample files:

    * add sample scripts for configuring MinGW version using Cygwin.

New ports:

    * none
      (it seems to run everywhere, but there are a few possibilities)

Improvements to existing ports:

    * UNIX:
  o add definition for _FILE_OFFSET_BITS in CF_LARGEFILE,
  needed for Solaris 64-bit compiles.
  o modify UCdomap.c to work with Solaris iconv and handle
  additional encodings:
+ if "TRANSLIT" feature (an extension of glibc)
does not succeed, retry the call to iconv_open
without "TRANSLIT"
+ add check for any MIME name beginning "iso8859",
mapping to "iso-8859"
                + recognize "eucjp" MIME name as alias for "euc-jp"
                + recognize "pck" MIME name as alias for "shift_jis"
                + recognize "ansi-1251" MIME name as alias for "windows-1251"
          o modify parsdate.y to convert between EBCDIC/ASCII to work on z/OS
    * Linux:
          o bug-fixes only

Improvements for maintainability and testing:

    * modify definitions in LYStructs.h for union to cast to a
    void* rather than a long, to help with 64-bit ports
    * fix some mismatched BOOL vs BOOLEAN from compiler warnings
    due to dev.13 change to LYStructs.h
    * change a few options such as --enable-locale-charset option
    to non-experimental
    * free leaks of LYLeaks.c, to make it simpler to check it with
    a second tool such as valgrind.
    * use off_t rather than long for representing file sizes, e.g.,
    when used to print progress messages
    * use dtd_util to replace most of HTMLDTD.h and HTMLDTD.c with
    source generated from the existing tables in those files
    * rename variable defined by CF_PATHSP to PATH_SEPARATOR, use
    this consistently to ease use in later autoconf versions

As well as security-related changes:

    * modify prompt in LYLoadCGI() from 2.8.6dev.15 to always prompt
    user (from FEDORA-2008-9597), and modify compiled-in configuration
    default for consistency with other lynx.cfg settings to require
    that lynx.cfg be set to permit use of lynxcgi scripts.
    * modify logic for reading PERSONAL_EXTENSION_MAP and
    PERSONAL_MAILCAP to ensure that they are files that are controlled
    only by the user. The default values for these allow lynx to
    read configuration information from the user's current directory
    at lynx's startup.
    * ensure that PERSONAL_EXTENSION_MAP and PERSONAL_MAILCAP are
    absolute pathnames, performing tilde expansion as needed.
    Pathnames that are not given in absolute form will be sought
    under the user's home directory as if they began with "~/".
    * ensure that the configured values for GLOBAL_EXTENSION_MAP
    and GLOBAL_MAILCAP are absolute pathnames.

And finally:

    * A lot of bug fixes
    * A lot of documentation changes.
    * A lot of dead code removed

(wiz)

Updated x11/libxklavier to 4.0

(wiz)

Update to 4.0:

4.0 Support for "extras" in xkeyboard-config, small bugfixes and build
fixes

(wiz)

Updated security/libtasn1 to 2.3

(wiz)

Update to 2.3. Update HOMEPAGE and MASTER_SITES. Set packager information.

* Noteworthy changes in release 2.3 (2009-07-29) [stable]
- Libtasn1 is now an official GNU project.
- Solve build problem on Tru64 related to TRUE/FALSE.
- More careful decoding of OIDs.
- Fixed warning in ASN1.y.
- Use "Software libraries" info dircategory.
- Drop GPL/LGPL copies from the manual (not needed there).
- New configure parameters to set packaging specific information.
  The parameters are --with-packager, --with-packager-version, and
  --with-packager-bug-reports.  See
  <http://article.gmane.org/gmane.comp.lib.gnulib.bugs/17791> for more
  details.

(wiz)

Updated textproc/p5-Pod-Simple to 3.08

(sno)

Updating package for p5 module Pod::Simple from 3.07nb1 to 3.08

pkgsrc changes:
  - Adding license (perl5 license)

Upstream changes:
2009-07-16  Allison Randal <allison@perl.org>
* Release 3.08

Fix installdirs for Perl versions where Pod::Simple was core;
        RT#36446 & RT#39709, thanks to Jerry Hedden.

Fix encoding handling for code in paragraphs; RT#45829, thanks
        to David Wheeler.

(sno)

MASTER_SITES=http://www.kernel.org/pub/linux/bluetooth/

(plunky)

Updated devel/p5-PPI to 1.206

(sno)

Updating package for p5 module PPI from 1.203nb2 to 1.206

pkgsrc changes:
  - Adjust dependencies according to META.yml
  - Add license (perl5 license)

Upstream changes:
1.206 Sun  9 Aug 2009
Summary:
- This is an optimisation release (1-2% speed up)
  (Using information uncovered by a Devel::NYTProf 3 alpha)

Details:
- Removing som superfluous 1; returns
- Using defined and ref to avoid highly excessive calls
  to PPI::Util::TRUE

1.205 Mon  3 Aug 2009
Summary:
- This is a production release

Details:
- No changes from 1.204_07

1.204_07 Fri 31 Jul 2009
Summary:
- Minor tweaks

Details:
- Allow ::For and ::List to return true to ->isa(::ForLoop)
  and do a once-per-process warning when we do.
- Fixed a bug in Class::XSAccessor prototype.

1.204_06 Wed 22 Jul 2009
Summary:
- API Change

Details:
- Changing PPI::Structure::ForLoop to PPI::Structure::For

1.204_05 Tue 21 Jul 2009
Summary:
- Bug fixes in preparation for production release

Details:
- There is no longer any real reason to bundle the testing modules
  except as a potential source of more bugs.
- Removed quantifier ? on zero-length ^ in /^?for(?:each)?\z/
- Run-time load PPI::Document instal of compile-time loading it
- Tweak a few load orders to get PPI::Util loaded earlier.
- Fixed location access methods on PPI::Element
- New PPI::Statement::Include::version_literal() method.

1.204_04 Thu 16 Jul 2009
Summary:
- Dependency tweaks

Details:
- Because we bundle Test::ClassAPI, we need to explicitly match its
  dependencies. Bumped Params::Util to 1.00.
- Bumped a couple of deps a couple of revisions to get better XS.

1.204_03 Tue 14 Jul 2009
Summary:
- More bug fixing, clean up, and optimisation
- Cleaning up contributed APIs
- Adding some demonstration classes

Details:
- Implemented PPI::Transform::UpdateCopyright
- Removed the use of 'use base'
- Various minor simplifications
- Renamed PPI::Statement::Switch to ::Given
- Renamed PPI::Structure::WhenMatch to ::When
- Converted the Lexer internals to use exception-based error
  handling.
- Take advantage of the removal of all those "or return undef"
  to simplify the Lexer code, remove variable declarations, and
  inline calls to several hot-code-path functions. The Lexer
  should be significantly faster (FSDO "significant").
- The v6 key on Tokenizer broke support for Perl 5.6
  (perl thought it was a numeric v-string)

1.204_02 Sun 10 May 2009
Summary:
- Various bug fixing and stabilisation work
- It's a perl 5.10 extravaganza!

Details:
- Updated Module::Install to 0.87
- Added Test::NoWarnings to the test suite
- Added support for qw{foo} in addition to for ('foo')
- Added support for vstrings again
- Now supports the 5.10 "state" keyword.
  (As far as PPI is concerned it's a synonym for "my")
- Now supports switch statements.
- Now supports the smart match operator (~~).
- Now supports keeping track of line numbers and file names as
  affected by the #line directive.
- Now supports UNITCHECK blocks.
- Statement::Include::module_version() implemented.
- Statement::Include::arguments() implemented.
- Statement::Variable::symbols() implemented.
- Token::QuoteLike::Words::literal() implemented.
- Token::Quote::Double::simplify() fixed.
- Element line_number(), column_number(), visual_column_number(),
  logical_line_number(), and logical_filename() implemented.
- Support for Unicode byte order marks (PPI::Token::BOM) added.
- Token::Word::method_call() implemented.
- Element::descendant_of() and Element::ancestor_of() implemented.
- Statement::specialized() implemented.
- Now can handle files named "0".
  (Perl::Critic got a complaint about this)
- foreach loop variables can be declared using "our".
- Much more comprehensive testing of compound statement detection.

1.204_01 Sun 18 May 2008
        Summary:
        - Unicode cleanup and bug fixing
- Taking the opportunity to do some house cleaning while the
  code base is relatively stable, before things get crazy again.

Details:
        - For completeness sake, add support for empty documents
        - Moved capability detection into PPI::Util
- POD test script now skips on install properly
- Removed 200 lines of old dead "rawinput" code from PPI::Tokenizer
- 100% of PPI::Tokenizer is now exception-driven
- Workaround for "RT#35917 - charsets.t eats all available VM"
  (unicode bug in 5.8.6, works in 5.8.8)
- Temporarily disable round-trip testing of 14_charset.t

(sno)

Updated devel/libixp to 0.5

(wiz)

Update to 0.5, convert to user-destdir.

The API of the fcall struct was changed for ANSI/C99 compliance.
A bug affecting the offset of consecutive writes was fixed. The
server's maximum message size is honored. ixpc's command line
parsing was fixed. Build problems on Solaris were fixed. The append
command was added to ixpc. wstat server support was added.

(wiz)

Updated time/p5-DateTime-Format-Natural to 0.78

(sno)

Updating package for p5 module DateTime::Format::Natural from 0.77 to 0.78

pkgsrc changes:
  - Fixing dependency from time/p5-Date-Calc to devel/p5-Date-Calc

Upstream changes:
0.78 Fri Aug  7 11:32:31 CEST 2009
- Merged development version to stable.

0.77_01 Thu Jun 25 16:00:27 CEST 2009
- Add a handful of new formats. [rt #43468 - Clayton L. Scott]
- Don't eventually try to guess the century.
- Introduce and use a class for common test routines.
- Test compile-time loading of Test.pm.
- Rename the misnamed 'hour' metadata option to 'hours'.
- _daytime() does not use the 'hours' metadata option when
  it is set and hence remove such existing entries.
- For base methods which use the 'hours' metadata option,
  assume a zero when no value is provided.

(sno)

Add tex-kotex-dev and tex-kotex-dev-doc.

(minskim)

Import tex-kotex-dev-doc-0.1.1 as print/tex-kotex-dev-doc.

This is documentation for tex-kotex-dev.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Import tex-kotex-dev-0.1.1 as print/tex-kotex-dev.

ko.TeX is a document typesetting system for Korean, developed and
distributed by the Korean TeX Society.  This package is a development
version of ko.TeX.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(minskim)

Note addition of ssss-0.5

(agc)

Add and enable ssss

(agc)

Initial import of security/ssss-0.5 into the packages collection.

Shamir's Secret Sharing Scheme (SSSS) is an implementation of a
threshold scheme for sharing a secret between third parties, and
requiring a threshold of those parties to collaborate to reveal the
secret.

Taken from the Wikipedia article about Secret Sharing:

In cryptography, a secret sharing scheme is a method for
distributing a secret amongst a group of participants, each of
which is allocated a share of the secret.  The secret can only
be reconstructed when the shares are combined together;
individual shares are of no use on their own.

Shamir's scheme is provable secure:  in a (t,n) scheme one can prove
that it makes no difference whether an attacker has t-1 valid shares
at his disposal or none at all; as long as he has less than t shares,
there is no better option than guessing to find out the secret.

Status:

Vendor Tag: TNF
Release Tags: pkgsrc-base

(agc)

More getline() fallout

(smb)

Updated x11/libSM to 1.1.1

(wiz)

Update to 1.1.1:

Adam Jackson (1):
      Avoid memcpy(foo, NULL, n), that's just nonsense.

Alan Coopersmith (1):
      Add README with pointers to mailing list, bugzilla & git repos

Caolan McNamara (1):
      Bug #17644: Fix valgrind warning in _SmcProcessMessage

Diego Elio 'Flameeyes' Petten嘆 (1):
      Use FreeBSD uuid functions when available.

Julien Cristau (2):
      If we don't have libuuid, build without it instead of failing
      Typo fix

Paulo Cesar Pereira de Andrade (2):
      avoid gcc warnings for libSM
      Janitor: ansification, make distcheck, compiler warnings.

R辿mi Cardona (1):
      libSM 1.1.1, update libtool version

(wiz)

Updated time/hamster-applet to 2.26.3

(wiz)

Update to 2.26.3:

Applet
  * utf-8 fixes in graphs and autocomplete (bug 585420 and bug 583851)

Updated translations
  * bn_IN (Runa Bhattacharjee)
  * ca@valencia (Gil Forcada)
  * uk (Maxim V. Dziumanenko)

(wiz)

- fix pkglint warnings
- patch-aa: if the build fails, try to bail out gracefully instead
  of entering an infinite cpu- and disk-eating loop.

(tnn)

Updated fonts/font-util to 1.0.2

(wiz)

Update to 1.0.2:

Alan Coopersmith (3):
      Update license of code copyrighted by the NetBSD Foundation
      Add missing copyright/license notices to COPYING
      Add README with pointers to mailing list, bugzilla & git repos

James Cloos (4):
      Rename .cvsignore to .gitignore
      Add *~ to .gitignore to skip patch/emacs droppings
      Replace bdftruncate Perl script with C program
      Replace static ChangeLog with dist-hook to generate from git log

Julien Cristau (1):
      Bump to 1.0.2

(wiz)

pkglint fix: reorder lines.

(wiz)

Updated devel/ruby-rcsparse to 0.0.0.45

(wiz)

Update to 45:
do not treat a failed rcscheckout() as system failure

A failed checkout is not necessarily caused by a solid system error, but
can be also caused by a faulty RCS file. Do not use rb_sys_fail(), since
it will abort() if errno == 0. Instead, simply raise a RuntimeError.

Reported-by: Brad King

check deltas for correctness before applying

We can not blindly trust the RCS file to contain correct deltas. We have
to verify that the chunks (especially deletes) make sense and operate on
existing lines.

Reported-by: Brad King

(wiz)

Pullup ticket #2857.

(tron)

Pullup ticket #2857 - requested by obache
GraphicsMagick: security update

Revisions pulled up:
- graphics/GraphicsMagick/Makefile 1.22
- graphics/GraphicsMagick/distinfo 1.18
- graphics/GraphicsMagick/patches/patch-ab 1.1
---
Module Name: pkgsrc
Committed By: obache
Date: Sat Aug  8 04:41:08 UTC 2009

Modified Files:
pkgsrc/graphics/GraphicsMagick: Makefile distinfo
Added Files:
pkgsrc/graphics/GraphicsMagick/patches: patch-ab

Log Message:
Add an patch to fixes CVE-2008-1097, taken from upstream repository.
Bump PKGREVISION.

(tron)

+ calibre-0.6.0, cherokee-0.99.22, ecl-9.8.1 [pkg/41846],
  f-spot-0.6.0.0, fotoxx-8.0, gnome-power-manager-2.26.4 [GNOME
  2.26, wants DeviceKit-power], gst-plugins0.10-base-0.10.24,
  gstreamer0.10-0.10.24, httping-1.31, libgee-0.3.0, libssh-0.3.2,
  mathomatic-14.5.3, py-game-1.9.1, samba-3.0.36, solfege-3.14.6.
- anthy-9100h, bzr-1.17, cdrtools-2.01.01alpha62, cheese-2.26.3,
  chicken-4.0.0, clive-2.2.4, diffuse-0.3.4, etm-290, fontconfig-2.7.1,
  gawk-3.1.7, gbdfed-1.5, gnome-mag-0.15.8, gsed-4.2, liferea-1.6.0,
  mediawiki-1.14.1 [pkg/41789], p5-Image-Info-1.29, poedit-1.4.2,
  subversion-1.6.3, subversion-base-1.6.3.

(wiz)

Actually add patch-aa. Www, permission problems.

(wiz)

Updated textproc/gsed to 4.2

(wiz)

Update to 4.2:

* now released under GPLv3

* added a new extension `z` to clear pattern space even in the presence
of invalid multibyte sequences

* a preexisting GNU gettext installation is needed in order to compile
GNU sed with NLS support

* new option --follow-symlinks, available when editing a file in-place.
This option may not be available on some systems (in this case, the
option will *not* be a no-op; it will be completely unavailable).
In the future, the option may be added as a no-op on systems without
symbolic links at all, since in this case a no-op is effectively
indistinguishable from a correct implementation.

* hold-space is reset between different files in -i and -s modes.

* multibyte processing fixed

* the following GNU extensions are turned off by --posix: options [iImMsSxX]
in the `s' command, address kinds `FIRST~STEP' and `ADDR1,+N' and `ADDR1,~N',
line address 0, `e' or `z' commands, text between an `a' or `c' or `i'
command and the following backslash, arguments to the `l' command.
--posix disables all extensions to regular expressions.

* fixed bug in 'i\' giving a segmentation violation if given alone.

* much improved portability

* much faster in UTF-8 locales

* will correctly replace ACLs when using -i

* will now accept NUL bytes for `.'

(wiz)

Note getmail update.

(schmonz)

Update to 4.11.0. From the changelog:

- fix --dump not generating any output for rcfiles containing
    "verbose = 0" option. Thanks: Morty Abzug.
- fix copy-and-paste error in documentation of MultiSorter destination.
    Thanks: Roland Hill.

(schmonz)

Allow python26. From Jan Danielsson.

(wiz)

Updated converters/p5-JSON-XS to 2.250

(sno)

Updating package for p5 module JSON::XS from 2.240 to 2.250

pkgsrc changes:
  - Adding dependency to devel/p5-common-sense

Upstream changes since 2.24:
2.25  Sat Aug  8 12:04:41 CEST 2009
- the perl debugger completely breaks lvalue subs - try to work
          around the issue.
- ignore RMAGICAL hashes w.r.t. CANONICAL.
- try to work around a possible char signedness issue on aix.
        - require common sense.

(sno)

Updated devel/p5-AnyEvent to 4.910

(sno)

Updating package for p5 module AnyEvent from 4.800 to 4.910

pkgsrc changes:
  - Adding recommended dependencies to pkgsrc and this package

Upstream changes:
4.91 Thu Aug  6 15:42:45 CEST 2009
- AE::Handle::starttls could get out of sync when the read buffer
          already contains some TLS handshake.
- AE::Handle did not properly free the TLS session, causing bigger
          memory leaks in Net::SSLeay than expected (reported by toaster).
        - AE::Socket::tcp_connect will now artificially delay invoking
          the callback to avoid returning after invoking the callback.
        - convert many internal watcher uses to AE API.

4.9  Sat Aug  1 11:07:01 CEST 2009
- Glib silently fails when registering a timeout with
          a negative value, so avoid that.
        - call condvar callback immediately  when it is set
          after the condition is already signalled.
        - check rbuf_max condition only after trying to consume
          data.
- normalise signal numbers to names when using the ae's
          signal handling, but do not document this (yet).
        - pure perl signal emulation did not properly set nonblocking
          mode on the signal pipe on win32 (this is unlikely to have caused
          any issues).
        - new module: AnyEvent::Debug.
        - AnyEvent::Strict now checks that a signal was specified
          by name (not name or number).
        - reduce memory footprint in typical cases by ~50kb by
          only compiling signal code when necessary.
        - add AnyEvent::Handle->rbuf_max.
        - grab the AE namespace for future new API, implement stubs for
          said future/alternative API.
        - new function: AnyEvent::Socket::format_hostport.

4.881 Tue Jul 28 12:51:53 CEST 2009
- work around a bug in local in pre-5.10 perls, causing
          AnyEvent::Handle to recurse when it should not
          (analyzed by elmex).

4.88 Tue Jul 28 04:04:37 CEST 2009
- re-bless the handle into a dummy package after calling
          AnyEvent::Handle::destroy, so the user does not need to check
          for errors after every push_write etc.
        - do not attempt to run t/02_signals.t on obviously broken
          platforms.

4.87 Sun Jul 26 02:06:16 CEST 2009
- do not attempt to linger when there is no longer a valid fh.
        - enforce tls mode to be either accept or connect, do not simply
          segfault in Net::SSLeay.
        - AnyEvent::Handle can now call tcp_connect itself (new parameters
          connect, on_prepare, on_connect and on_connect_error). Updated
          tutorial accordingly.
- add AnyEvent::Impl::Irssi backend.

4.86 Mon Jul 20 23:52:29 CEST 2009
- since the verbose warning is not enough, explicitly document
          that versions before 1.33 of Net::SSLeay are not secure.
- work around signal handling races in Event and (...) Event::Lib.
        - try to align signal-race timer to full-second boundaries.
        - work around Tk not liking negative timeouts.
        - don't complain of different grades of environmental unfriendlyness
          in IO::Async.

4.85 Sat Jul 18 06:16:14 CEST 2009
        - nail the signal race problem in perl once and for all
          (see $AnyEvent::MAX_SIGNAL_LATENCY).
        - take advantage of Async::Interrupt if it is available.
        - load Time::HiRes and Guard modules on demand only.
        - add optional/recommended modules section to AnyEvent
          documentation.
        - reduce memory usage considerably (and reduce startup penalty)
          by not using "strict", "warnings" and "overload" modules.
        - work around buggy windows/openbsd perls and provide EBADMSG
          and EPROTO ourselves when missing.
- improve perl 5.6 compatibility of the core event loop.
        - made Net::SSLeay version 1.33 a soft requirement.

4.83 Fri Jul 17 16:56:26 CEST 2009
- implement AnyEvent::Socket::getprotobyname.
- AnyEvent::CondVar's will now detect recursive blocking
          waits and will croak, as too many people fall into
          this trap.
        - AnyEvent::Handle will now call ->destroy on itself after
          executing the on_error callback, instead of doing some
          half-baked internal shutdown, for fatal errors.
        - clarify on_eof behaviour w.r.t. the read queue and
          on_read callbacks.
- ignore some possible spurious wake-ups in tcp_connect.

4.82 Sat Jul 11 00:34:55 CEST 2009
- POE and Event backends didn't accept some callable objects as
          callbacks.
- use Config module instead of POSIX module to detect signal names
          in AnyEvent::Strict and AnyEvent::Impl::EventLib, as the POSIX
          module doesn't even have all POSIX signals :/.
        - use more workarounds around the many refcnt/corruption bugs in
          Event::Lib.
        - work around a race condition in perl's select, causing t/03_child.t
          to rarely fail.

4.81 Thu Jul  9 10:30:30 CEST 2009
        - AnyEvent::Handle didn't properly diagnose write errors
          (it expected -1 from syswrite, how lame... :).
- support file descriptors in addition to file handles
          in AnyEvent->io.
- new env variables: PERL_ANYEVENT_RESOLV_CONF,
          PERL_ANYEVENT_MAX_OUTSTANDING_DNS, PERL_ANYEVENT_CA_FILE
          and PERL_ANYEVENT_CA_PATH.
        - provide a sensible synopsis section for AnyEvent::TLS.
        - add a "supported backends" section to the manpage.
        - added simple io watcher test to testsuite, using a
          portable_socketpair.
        - tried to improve the stability of the Event::Lib backend,
          YMMV.

(sno)