glibmm: mention API version in COMMENT and DESCR

(wiz)

libxml++: mention API version in DESCR and COMMENT

(wiz)

evolution: Really commit cmake patch

(cirnatdan)

evolution: Fix build. Patch for newer cmake - variable name comparison

(cirnatdan)

doc: Updated sysutils/memtester to 4.5.1

(schmonz)

Update to 4.5.1. From the changelog:

- documentation-only update.
- add note to README about build problem with Tru64, with workaround.
  Thanks: V鱈ctor Ostorga.

(schmonz)

doc: Updated net/unifi to 6.0.45

(gdt)

net/unifi: update to 6.0.45

Packaged in wip by otis@, roy@ and gdt@.
Tested on NetBSD 9 amd64 with openjdk11 (as upgrade from 5).

Upstream significant changes:

What窶冱 New in 6.0?

    Introduce Beta Dashboard for UDM.
    Implement Real-Time statistics for UDM.
    Preview new Beta Settings.
    Redesign, simplify and move Site, Controller, Maintenance, Remote Access and Backup configuration to System Settings.
    Hide and auto-configure Data Retention for Statistics.
    Redesign and move Wi-Fi AI configuration to System Settings page.
    Redesign and move RADIUS and Switch Port profiles to Advanced Features page.
    Redesign and move Services to Advanced Gateway Settings to Advanced Features page.
    Move User Groups to Client Groups on Advanced Features page.
    Redesign and move Wireless Networks configuration to Wi-Fi page.
    Replace WLAN Groups with new AP Groups feature.
    Simplify WiFi creation - WPA2 Security protocol with Password is set by default.
    Allow selecting WPA2 Enterprise Security Protocol if at least one Radius profile is enabled.
    Change VLAN ID numeric input to Network dropdown.
    Integrate Guest Control with Hotspot configuration on Wi-Fi page.
    Redesign and move LAN Networks configuration to Networks page.
    Add Auto Scale Network feature.
    Move VLAN Only Networks to Network Isolation in Advanced Features.
    Update Content Filtering categories and move to Network configuration.
    Add new Device Isolation (creates guest network if turned on) and Internet Access (blocks WAN access if turned off) toggles.
    Redesign and move WAN Networks configuration to Internet page.
    Redesign and move DPI configuration to Security page.
    Redesign and move Threat Management configuration to Security page.
    Introduce AP Groups feature.
    AP Groups simplifies the way to configure Wi-Fi and arrange APs in logical groups.
    That feature is replacing WLAN Groups and WLAN Overrides. It窶冱 a breaking change and some corner cases may not covered by migration.
    Some WLAN Group configurations have been migrated to individual Wi-Fi Network configurations.
    Preview Auto Scale Network feature.
    That feature automatically adjusts subnet size and DHCP range with avoiding network collision.
    Add ability to report incorrect Wi-Fi Experience.
    Add Survey for Beta Dashboard and Beta Settings.

Improvements

    Add transition animations in Beta Settings.
    Add buttons for guest client authentication and unauthentication.
    Replace Speed test gauge with numbers.
    Move PMF to WLAN configuration in Beta Settings.
    Show AP promo placeholder in the new dashboard when there is no WiFi network created.
    Show Original vendor logos when device logo is unavailable.
    Remove Combine Name/SSID option from Settings.
    Improve the user experience of AP Group validation in Beta Settings.

(gdt)

Updated devel/R-callr to 3.7.0
Updated sysutils/R-processx to 3.5.2

(mef)

(devel/R-callr) Updated 3.5.1 to 3.7.0 (make test fails at PDF creation)

# callr 3.7.0

* Reporting errors is much faster now (#185).

* The `user_profile` option of `r_vanilla()` defaults to `FALSE` now (#194).

* It is now possible to set R environment variables (`R_ENVIRON_USER`,
  `R_PROFILE_USER`, etc.) via the `env` argument (#193).

# callr 3.6.0

* callr now supports starting an R process with a different architecture,
  so on Windows 64-bit R can start a 32-bit R background process, and
  vice-versa (#95).

* callr now handles symbolic arguments properly, and does not evaluate them.
  E.g. `callr::r(function(x) x, list(quote(foobar)))` works now (#175).

* `callr::r_session` does not leak file descriptors now in the sub-process
  (#184).

(mef)

rust: Fix cargo module build

(ryoon)

(sysutils/R-processx) Updated 3.4.5 to 3.5.2

# processx 3.5.2

* `run()` now does not truncate stdout and stderr when the output
  contains multibyte characters (#298, @infotroph).

* processx now compiles with custom compilers that enable OpenMP (#297).

* processx now avoids a race condition when the working directory is
  changed right after starting a process, potentially before the
  sub-process is initialized (#300).

* processx now works with non-ASCII path names on non-UTF-8 Unix platforms
  (#293).

# processx 3.5.1

* Fix a potential failure when polling curl file descriptors on Windows.

# processx 3.5.0

* You can now append environment variables to the ones set in the current
  process if you include `"current"` in the value of `env`, in `run()`
  and for `process$new()`: `env = c("current", NEW = "newvalue")` (#232).

* Sub-processes can now inherit the standard input, output and error from
  the main R process, by setting the corresponding argument to an empty
  string. E.g. `run("ls", stdout = "")` (#72).

* `run()` is now much faster with large standard output or standard
  error (#286).

* `run()` can now discard the standard output and error or redirect
  them to file(s), instead of collecting them.

* processx now optionally uses the cli package to color error messages
  and stack traces, instead of crayon.

(mef)

Updated devel/py-boltons, sysutils/py-eliot

(adam)

py-eliot: updated to 1.13.0

1.13.0

Features:

@capture_logging and MemoryLogger now support specifying a custom JSON encoder. By default they now use Eliot窶冱 encoder. This means tests can now match the encoding used by a FileDestination.
Added support for Python 3.9.

Deprecation:

Python 3.5 is no longer supported.

(adam)

py-boltons: updated to 21.0.0

21.0.0

Fix OMD.addlist when the added list is empty
Add funcutils.noop, satisfying PEP 559
Support lists for iterutils.bucketize
Python 3.9 test fixes for OMD (PEP 584)
Make typeutils.make_sentinel more pickleable
jsonutils.reverse_iter_lines now works on Py3 and Windows

(adam)

Pullup tickets up to #6466

(bsiegert)

Pullup ticket #6466 - requested by taca
databases/mysql57-client: security fix

Revisions pulled up:
- databases/mysql57-client/Makefile.common                      1.33-1.34
- databases/mysql57-client/PLIST                                1.21
- databases/mysql57-client/distinfo                            1.41-1.42
- databases/mysql57-client/patches/patch-cmake_build__configurations_compiler__options.cmake 1.1
- databases/mysql57-client/patches/patch-mysys_kqueue__timers.c 1.2
- databases/mysql57-client/patches/patch-sql_locks_shared__spin__lock.cc 1.2
- databases/mysql57-server/PLIST                                1.21

---
  Module Name: pkgsrc
  Committed By: adam
  Date: Wed Apr 21 13:26:55 UTC 2021

  Modified Files:
  pkgsrc/databases/mysql57-client: Makefile.common PLIST distinfo
  pkgsrc/databases/mysql57-client/patches: patch-mysys_kqueue__timers.c
      patch-sql_locks_shared__spin__lock.cc
  pkgsrc/databases/mysql57-server: PLIST

  Log Message:
  mysql57: updated to 5.7.34

  Changes in MySQL 5.7.34 (2021-04-20, General Availability)

  Configuration Notes

  The CMAKE_BUILD_TYPE CMake option now supports a Release build type, which is like the RelWithDebInfo build type but omits debugging information to reduce the build size.

  Packaging Notes

  The bundled libedit library was upgraded to version 20190324-3.1.

  Binary packages that include curl rather than linking to the system curl library have been upgraded to use curl 7.74.0.

  Security Notes

  The linked OpenSSL library for MySQL Server has been updated to version 1.1.1k. Issues fixed in the new OpenSSL version are described at https://www.openssl.org/news/cl111.txt and https://www.openssl.org/news/vulnerabilities.html.

  Functionality Added or Changed

  Microsoft Windows: The named_pipe_full_access_group system variable now defaults to an empty string (''), making named pipe connections secure. Previously, '*everyone*' was the default value. A valid Windows local group name may be substituted.

  Bugs Fixed

  InnoDB: The introduction of sharded rw_lock_stats counters in MySQL 5.7 caused a regression in CPU cache efficiency. To address this issue in MySQL 5.7, the sharding method was changed. For optimal performance, the rw_lock_stats counter is removed in MySQL 8.0.

  InnoDB: A delete operation on a parent table that initiated a cascading update on a child table with an indexed virtual column and indexed foreign key constraint column caused a virtual column corruption.

  InnoDB: An adaptive hash index (AHI) latch was held in shared mode by a thread truncating a large table, causing mutex waits for other threads. The AHI latch was not required and has been removed.

  InnoDB: The open and close sequence for table share instances (m_share objects) and dictionary table instances was modified to prevent accessing old m_share objects that could point to stale dictionary indexes.

  Thanks to Yuxiang Jiang for the contribution.

  InnoDB: An online ALTER TABLE operation failed with an “Incorrect key file for table” error due to an unnecessary encryption status check that was performed when reading online DDL row logs.

  Replication: If all previous binary log files were purged at startup because their retention period had expired, the new binary log file contained an empty Previous_gtids event, which could cause errors in replication. The order of initialization has now been changed so that previous binary log files are only purged after the previous GTID set has been written to the new binary log file that is created at startup.

  Replication: An assertion was raised in debug builds relating to lost GTIDs if binary log files were removed at startup because their retention period had expired.

  Replication: A deadlock could occur if the binary log file was rotated while system variables were being updated and read by different clients.

  Replication: The output of a SHOW PROCESSLIST statement for a replica’s SQL thread sometimes showed the last query as currently being applied when the replica was actually caught up.

  A query string was displayed before it had been rewritten.

  For builds compiled using the libedit library, if the mysql client was invoked with the --default-character-set=utf8 option, libedit rejected input of multibyte characters.

  On Windows, large result sets could cause the mysql client to exit unexpectedly.

  Improper locking on an internal queue could cause mysqlpump to exit unexpectedly.

  It is now possible to use START REPLICA SQL_THREAD and STOP REPLICA SQL_THREAD statements for the group_replication_applier channel when Group Replication is stopped. This enables an operator to apply any remaining unapplied transactions on a server that left the group, without having to rejoin the server to the group.

  When the mysql client was used in batch mode, its parser could be confused by USE followed by DROP DATABASE when the USE database name was quoted.

  While optimizing the ORDER BY clause of a subquery there was a possibility of cleaning up a subquery tree referenced in the outer SELECT, which could lead to a premature exit.

  A malformed name in the mysql.func system table could cause unexpected server behavior.

  Sessions could disable their own auditing.

  Mishandling of stored program local variables could lead to unexpected server behavior.

  Uninstalling a plugin could affect subsequent execution of prepared statements.

---
  Module Name: pkgsrc
  Committed By: adam
  Date: Thu Apr 29 16:50:33 UTC 2021

  Modified Files:
  pkgsrc/databases/mysql57-client: Makefile.common distinfo
  Added Files:
  pkgsrc/databases/mysql57-client/patches:
      patch-cmake_build__configurations_compiler__options.cmake

  Log Message:
  mysql57: fix building with GCC

(bsiegert)

Pullup ticket #6465 - requested by taca
www/squid4: security fix

Revisions pulled up:
- www/squid4/Makefile                                          1.18
- www/squid4/distinfo                                          1.11

---
  Module Name: pkgsrc
  Committed By: taca
  Date: Mon May 10 14:22:57 UTC 2021

  Modified Files:
  pkgsrc/www/squid4: Makefile distinfo

  Log Message:
  www/squid4: update to 4.15

  This release fixes these security issues from prior release.

  * SQUID-2020:11 HTTP Request Smuggling
    (CVE-2020-25097)
  * SQUID-2021:1 Denial of Service in URN processing
    (CVE-2021-28651)
  * SQUID-2021:2 Denial of Service in HTTP Response Processing
    (CVE-2021-28662)
  * SQUID-2021:3 Denial of Service issue in Cache Manager
    (CVE-2021-28652)
  * SQUID-2021:4 Multiple issues in HTTP Range header
    (CVE-2021-31806, CVE-2021-31807, CVE-2021-31808)
  * SQUID-2021:5 Denial of Service in HTTP Response Processing
    (CVE pending allocation)

  Changes in squid-4.15 (10 May 2021):

  - Bug 5112: Excessively loud chunked reply parsing error reporting
  - Bug 5106: Broken cache manager URL parsing
  - Bug 5104: Memory leak in RFC 2169 response parsing
  - Bug 3556: "FD ... is not an open socket" for accept() problems
  - Profiling: CPU timing implemented for MAC non-x86
  - Fix HttpHeaderStats definition to include hoErrorDetail
  - Fix Squid-to-client write_timeout triggers client_lifetime timeout
  - Limit HeaderLookupTable_t::lookup() to BadHdr and specific IDs
  - Handle more Range requests
  - Handle more partial responses
  - Stop processing a response if the Store entry is gone
  - ... and some portability fixes
  - ... and some documentation updates

(bsiegert)

haxm: set USE_BSD_MAKEFILE

(nia)

Pullup ticket #6464 - requested by taca
net/isc-dhcp4: security fix

Revisions pulled up:
- net/isc-dhcp4/Makefile.common                                1.42
- net/isc-dhcp4/distinfo                                        1.30

---
  Module Name: pkgsrc
  Committed By: taca
  Date: Thu May 27 14:10:12 UTC 2021

  Modified Files:
  pkgsrc/net/isc-dhcp4: Makefile.common distinfo

  Log Message:
  net/isc-dhcp4: update to 4.4.2p1

  Update isc-dhcp4 to 4.4.2p1 (4.4.2-P1).

  Changes since 4.4.2 (Bug Fixes)

    ! Corrected a buffer overwrite possible when parsing hexadecimal
      literals with more than 1024 octets. Reported by Jon Franklin from Dell,
      and also by Pawel Wieczorkiewicz from Amazon Web Services.
      [Gitlab #182]
      CVE: CVE-2021-25217

(bsiegert)

Pullup ticket #6463 - requested by nia
emulators/haxm: build fix

Revisions pulled up:
- emulators/haxm/Makefile                                      1.18

---
  Module Name: pkgsrc
  Committed By: nia
  Date: Sat May 29 06:47:05 UTC 2021

  Modified Files:
  pkgsrc/emulators/haxm: Makefile

  Log Message:
  haxm: Disable Werror the standard way for share/mk.

  Don't use compiler flags that may not be supported in older compilers
  (notably on NetBSD 9)...

(bsiegert)

Updated www/py-urllib3, devel/py-dulwich

(adam)

py-dulwich: updated to 0.20.23

0.20.23
* Fix installation of GPG during package publishing.

(adam)

py-urllib3: updated to 1.26.5

1.26.5 (2021-05-26)
-------------------
* Fixed deprecation warnings emitted in Python 3.10.
* Updated vendored ``six`` library to 1.16.0.
* Improved performance of URL parser when splitting
  the authority component.

(adam)

doc: Updated devel/pccts to 1.33.33nb1

(wiz)

pccts: Honor LDFLAGS and CFLAGS.

Set LICENSE.

Bump PKGREVISION.

(wiz)

doc: Updated devel/pcre2 to 10.37

(wiz)

pcre2: update to 10.37.

Version 10.37 26-May-2021
-------------------------

A few more bug fixes and tidies. The only change of real note is the removal of
the actual POSIX names regcomp etc. from the POSIX wrapper library because
these have caused issues for some applications (see 10.33 #2 below).

(wiz)

doc: Updated security/gnutls to 3.7.2

(wiz)

gnutls: update to 3.7.2.

* Version 3.7.2 (released 2021-05-29)

** libgnutls: The priority string option %DISABLE_TLS13_COMPAT_MODE was added
  to disable TLS 1.3 middlebox compatibility mode

** libgnutls: The Linux kernel AF_ALG based acceleration has been added.
  This can be enabled with --enable-afalg configure option, when libkcapi
  package is installed (#308).

** libgnutls: Fixed timing of early data exchange. Previously, the client was
  sending early data after receiving Server Hello, which not only negates the
  benefit of 0-RTT, but also works under certain assumptions hold (e.g., the
  same ciphersuite is selected in initial and resumption handshake) (#1146).

** certtool: When signing a CSR, CRL distribution point (CDP) is no longer
  copied from the signing CA by default (#1126).

** libgnutls: The GNUTLS_NO_EXPLICIT_INIT envvar has been renamed to
  GNUTLS_NO_IMPLICIT_INIT to reflect the purpose (#1178). The former is now
  deprecated and will be removed in the future releases.

** certtool: When producing certificates and certificate requests, subject DN
  components that are provided individually will now be ordered by
  assumed scale (e.g. Country before State, Organization before
  OrganizationalUnit).  This change also affects the order in which
  certtool prompts interactively.  Please rely on the template
  mechanism for automated use of certtool! (#1243)

** API and ABI modifications:
gnutls_early_cipher_get: Added
gnutls_early_prf_hash_get: Added

(wiz)

doc: Updated converters/libetonyek to 0.1.10

(wiz)

libetonyek: update to 0.1.10.

libetonyek 0.1.10

- All formats:
  + Parse shadow.
  + Improve detection of the "new" formats. (tdf#123571)
  + Fix handling of text baseline shift.
- Keynote 6+:
  + Parse layout properties of textboxes.
  + Improve handling of colors.
  + Parse bullet images.
  + Fix handling of line stroke.
  + Avoid adding superfluous empty lines.
  + Parse image masks.
  + Improve parsing of shape groups.
  + Handle fit-to-size in text boxes.
- Numbers 1-2:
  + Improve parsing of range addresses.
  + Parse textboxes.
  + Parse images.
  + Handle grouped shapes.
  + Parse cell comments.
  + Create a special graphic sheet if needed.
  + Parse sticky notes.
- Numbers 3+:
  + Parse formulas.
  + Parse cell formats.
  + Parse sheet references.
  + Parse cell comments.
  + Parse shapes (including groups).
  + Improve parsing of bezier paths.
  + Parse sticky notes.
  + Improve handling of colors.
  + Parse bullet images.
  + Parse image masks.
  + Handle fit-to-size in text boxes.
- Pages 1-4:
  + Handle text boxes attached as character.
- Pages 5+:
  + Improve handling of colors.
  + Parse bullet images.
  + Process page headers and footers even if the document is empty.
  + Fix handling of line stroke.
  + Parse image masks.
  + Improve parsing of shape groups.
  + Handle text boxes attached as character.
  + Parse page background.
  + Handle fit-to-size in text boxes.

(wiz)

doc: Updated math/gsl to 2.6

(wiz)

gsl: update to 2.6.

* What is new in gsl-2.6:

** add BLAS calls for the following functions:
    - gsl_vector_memcpy
    - gsl_vector_scale
    - gsl_matrix_memcpy
    - gsl_matrix_transpose_memcpy
    - gsl_matrix_tricpy
    - gsl_matrix_transpose_tricpy

** deprecated functions gsl_linalg_complex_householder_hm and
  gsl_linalg_complex_householder_mh

** add unit tests for gsl_linalg_symmtd and gsl_linalg_hermtd

** multilarge TSQR algorithm has been converted to use the new Level 3 QR decomposition

** nonlinear least squares Cholesky solver now uses the new Level 3 BLAS
  method; the old modified Cholesky solver is still available under
  gsl_multifit_nlinear_solver_mcholesky and gsl_multilarge_nlinear_solver_mcholesky

** implemented Level 3 BLAS versions of several linear algebra routines:
    - Triangular matrix inversion
    - Cholesky decomposition and inversion (real and complex)
    - LU decomposition and inversion (real and complex)
    - QR decomposition (courtesy of Julien Langou)
    - Generalized symmetric/hermitian eigensystem reduction to standard form

** removed deprecated function gsl_linalg_hessenberg()

** renamed gsl_interp2d_eval_e_extrap() to gsl_interp2d_eval_extrap_e()
  to match documentation (reported by D. Lebrun-Grandie)

** renamed some of the gsl_sf_hermite functions to be more consistent
  with rest of the library, and deprecated old function names

** updated gsl_sf_hermite_func() to use a newer algorithm
  due to B. Bunck which is more stable for large x; also added
  gsl_sf_hermite_func_fast() which uses the faster Cauchy integral
  algorithm in the same paper by Bunck

** add gsl_vector_axpby()

** add un-pivoted LDLT decomposition and its banded
  variant (gsl_linalg_ldlt_* and gsl_linalg_ldlt_band_*)

** add binary search tree module (gsl_bst); based on GNU libavl

** remove -u flag to gsl-histogram

** updated spmatrix module
  - added routines and data structures for all types (float,uint,char,...)
  - added gsl_spmatrix_scale_columns() and gsl_spmatrix_scale_rows()
  - added gsl_spmatrix_add_to_dense()
  - more efficient reallocation of COO/triplet matrices (no longer rebuilds binary tree)
  - enhanced test suite
  - added gsl_spmatrix_min_index()

** add routines for banded Cholesky decomposition (gsl_linalg_cholesky_band_*)

** documented gsl_linalg_LQ routines and added gsl_linalg_LQ_lssolve()

(wiz)

doc: Updated sysutils/fzf to 0.27.1

(wiz)

fzf: update to 0.27.1.

Added unbind action. In the following Ripgrep launcher example,
you can use unbind(reload) to switch to fzf-only filtering mode.

Vim plugin

    Vim plugin will stop immediately even when the source command hasn't finished

    It is now possible to open popup window relative to the currrent window

(wiz)

doc: Updated fonts/cascadia-ttf to 2105.24

(wiz)

cascadia-ttf: update to 2105.24.

This is the first release of Cascadia "Curve", the Italic variant
of Cascadia Code.

(wiz)

Note update of lang/rust to 1.52.1.

(he)

Update lang/rust to version 1.52.1.

Pkgsrc changes:
* Bump bootstrap kit version to 1.51.0.
* Adjust patches as needed.
* Update checksum adjustments.
* Fix syntax error in commands adjusting libserde_derive for Darwin

Upstream changes:

Version 1.52.1 (2021-05-10)
============================

This release disables incremental compilation, unless the user has explicitly
opted in via the newly added RUSTC_FORCE_INCREMENTAL=1 environment variable.

This is due to the widespread, and frequently occuring, breakage encountered by
Rust users due to newly enabled incremental verification in 1.52.0. Notably,
Rust users **should** upgrade to 1.52.0 or 1.52.1: the bugs that are detected by
newly added incremental verification are still present in past stable versions,
and are not yet fixed on any channel. These bugs can lead to miscompilation of
Rust binaries.

These problems only affect incremental builds, so release builds with Cargo
should not be affected unless the user has explicitly opted into incremental.
Debug and check builds are affected.

See [84970] for more details.

[84970]: https://github.com/rust-lang/rust/issues/84970

Version 1.52.0 (2021-05-06)
============================

Language
--------
- [Added the `unsafe_op_in_unsafe_fn` lint, which checks whether
  the unsafe code in an `unsafe fn` is wrapped in a `unsafe`
  block.][79208] This lint is allowed by default, and may become
  a warning or hard error in a future edition.

- [You can now cast mutable references to arrays to a pointer of
  the same type as the element.][81479]

Compiler
--------
- [Upgraded the default LLVM to LLVM 12.][81451]

Added tier 3\* support for the following targets.

- [`s390x-unknown-linux-musl`][82166]
- [`riscv32gc-unknown-linux-musl` & `riscv64gc-unknown-linux-musl`][82202]
- [`powerpc-unknown-openbsd`][82733]

\* Refer to Rust's [platform support page][platform-support-doc] for more
information on Rust's tiered platform support.

Libraries
---------
- [`OsString` now implements `Extend` and `FromIterator`.][82121]
- [`cmp::Reverse` now has `#[repr(transparent)]` representation.][81879]
- [`Arc<impl Error>` now implements `error::Error`.][80553]
- [All integer division and remainder operations are now `const`.][80962]

Stabilised APIs
-------------
- [`Arguments::as_str`]
- [`char::MAX`]
- [`char::REPLACEMENT_CHARACTER`]
- [`char::UNICODE_VERSION`]
- [`char::decode_utf16`]
- [`char::from_digit`]
- [`char::from_u32_unchecked`]
- [`char::from_u32`]
- [`slice::partition_point`]
- [`str::rsplit_once`]
- [`str::split_once`]

The following previously stable APIs are now `const`.

- [`char::len_utf8`]
- [`char::len_utf16`]
- [`char::to_ascii_uppercase`]
- [`char::to_ascii_lowercase`]
- [`char::eq_ignore_ascii_case`]
- [`u8::to_ascii_uppercase`]
- [`u8::to_ascii_lowercase`]
- [`u8::eq_ignore_ascii_case`]

Rustdoc
-------
- [Rustdoc lints are now treated as a tool lint, meaning that
  lints are now prefixed with `rustdoc::` (e.g.
  `#[warn(rustdoc::non_autolinks)]`).][80527] Using the old style
  is still allowed, and will become a warning in a future release.
- [Rustdoc now supports argument files.][82261]
- [Rustdoc now generates smart punctuation for documentation.][79423]
- [You can now use "task lists" in Rustdoc Markdown.][81766] E.g.
  ```markdown
  - [x] Complete
  - [ ] Todo
  ```

Misc
----
- [You can now pass multiple filters to tests.][81356] E.g.
  `cargo test -- foo bar` will run all tests that match `foo` and `bar`.
- [Rustup now distributes PDB symbols for the `std` library on Windows,
  allowing you to see `std` symbols when debugging.][82218]

Internal Only
-------------
These changes provide no direct user facing benefits, but represent significant
improvements to the internals and overall performance of rustc and
related tools.

- [Check the result cache before the DepGraph when ensuring queries][81855]
- [Try fast_reject::simplify_type in coherence before doing full check][81744]
- [Only store a LocalDefId in some HIR nodes][81611]
- [Store HIR attributes in a side table][79519]

Compatibility Notes
-------------------
- [Cargo build scripts are now forbidden from setting
  `RUSTC_BOOTSTRAP`.][cargo/9181]
- [Removed support for the `x86_64-rumprun-netbsd` target.][82594]
- [Deprecated the `x86_64-sun-solaris` target in favor of
  `x86_64-pc-solaris`.][82216]
- [Rustdoc now only accepts `,`, ` `, and `\t` as delimiters for specifying
  languages in code blocks.][78429]
- [Rustc now catches more cases of `pub_use_of_private_extern_crate`][80763]
- [Changes in how proc macros handle whitespace may lead to panics
  when used with older `proc-macro-hack` versions. A `cargo update` should
  be sufficient to fix this in all cases.][84136]

[84136]: https://github.com/rust-lang/rust/issues/84136
[80763]: https://github.com/rust-lang/rust/pull/80763
[82166]: https://github.com/rust-lang/rust/pull/82166
[82121]: https://github.com/rust-lang/rust/pull/82121
[81879]: https://github.com/rust-lang/rust/pull/81879
[82261]: https://github.com/rust-lang/rust/pull/82261
[82218]: https://github.com/rust-lang/rust/pull/82218
[82216]: https://github.com/rust-lang/rust/pull/82216
[82202]: https://github.com/rust-lang/rust/pull/82202
[81855]: https://github.com/rust-lang/rust/pull/81855
[81766]: https://github.com/rust-lang/rust/pull/81766
[81744]: https://github.com/rust-lang/rust/pull/81744
[81611]: https://github.com/rust-lang/rust/pull/81611
[81479]: https://github.com/rust-lang/rust/pull/81479
[81451]: https://github.com/rust-lang/rust/pull/81451
[81356]: https://github.com/rust-lang/rust/pull/81356
[80962]: https://github.com/rust-lang/rust/pull/80962
[80553]: https://github.com/rust-lang/rust/pull/80553
[80527]: https://github.com/rust-lang/rust/pull/80527
[79519]: https://github.com/rust-lang/rust/pull/79519
[79423]: https://github.com/rust-lang/rust/pull/79423
[79208]: https://github.com/rust-lang/rust/pull/79208
[78429]: https://github.com/rust-lang/rust/pull/78429
[82733]: https://github.com/rust-lang/rust/pull/82733
[82594]: https://github.com/rust-lang/rust/pull/82594
[cargo/9181]: https://github.com/rust-lang/cargo/pull/9181
[`char::MAX`]: https://doc.rust-lang.org/std/primitive.char.html#associatedconstant.MAX
[`char::REPLACEMENT_CHARACTER`]: https://doc.rust-lang.org/std/primitive.char.html#associatedconstant.REPLACEMENT_CHARACTER
[`char::UNICODE_VERSION`]: https://doc.rust-lang.org/std/primitive.char.html#associatedconstant.UNICODE_VERSION
[`char::decode_utf16`]: https://doc.rust-lang.org/std/primitive.char.html#method.decode_utf16
[`char::from_u32`]: https://doc.rust-lang.org/std/primitive.char.html#method.from_u32
[`char::from_u32_unchecked`]: https://doc.rust-lang.org/std/primitive.char.html#method.from_u32_unchecked
[`char::from_digit`]: https://doc.rust-lang.org/std/primitive.char.html#method.from_digit
[`Peekable::next_if`]: https://doc.rust-lang.org/stable/std/iter/struct.Peekable.html#method.next_if
[`Peekable::next_if_eq`]: https://doc.rust-lang.org/stable/std/iter/struct.Peekable.html#method.next_if_eq
[`Arguments::as_str`]: https://doc.rust-lang.org/stable/std/fmt/struct.Arguments.html#method.as_str
[`str::split_once`]: https://doc.rust-lang.org/stable/std/primitive.str.html#method.split_once
[`str::rsplit_once`]: https://doc.rust-lang.org/stable/std/primitive.str.html#method.rsplit_once
[`slice::partition_point`]: https://doc.rust-lang.org/stable/std/primitive.slice.html#method.partition_point
[`char::len_utf8`]: https://doc.rust-lang.org/stable/std/primitive.char.html#method.len_utf8
[`char::len_utf16`]: https://doc.rust-lang.org/stable/std/primitive.char.html#method.len_utf16
[`char::to_ascii_uppercase`]: https://doc.rust-lang.org/stable/std/primitive.char.html#method.to_ascii_uppercase
[`char::to_ascii_lowercase`]: https://doc.rust-lang.org/stable/std/primitive.char.html#method.to_ascii_lowercase
[`char::eq_ignore_ascii_case`]: https://doc.rust-lang.org/stable/std/primitive.char.html#method.eq_ignore_ascii_case
[`u8::to_ascii_uppercase`]: https://doc.rust-lang.org/stable/std/primitive.u8.html#method.to_ascii_uppercase
[`u8::to_ascii_lowercase`]: https://doc.rust-lang.org/stable/std/primitive.u8.html#method.to_ascii_lowercase
[`u8::eq_ignore_ascii_case`]: https://doc.rust-lang.org/stable/std/primitive.u8.html#method.eq_ignore_ascii_case

(he)

doc: Updated emulators/mame to 0.232

(wiz)

mame: update to 0.232.

It窶冱 time for MAME 0.232, and do we have a surprise for you! The
incredibly rare Universal game Mrs. Dynamite has finally been found
and dumped! This is an early example of a game where you place
bombs to kill enemies that walk over them, showing Universal窶冱
flair for cute characters and cutscenes. Mrs. Dynamite is believed
to had performed poorly on location tests, and never had a widespread
release. The graphics in the version that has been dumped don窶冲
match what窶冱 shown on flyers. Other arcade additions include Dokaben
2 and a prototype of Spinal Breakers.

Namco racing games have taken a leap forward this month. Final Lap
has its sprite chip hooked up subtly differently to later games on
the System II platform, which had been causing graphical issues on
the title screen. Lack of playback status register emulation in
the C140 sound chip was causing issues with engine sounds in Final
Lap, Suzuka 8 Hours, and Four Trax. The horizontal position of the
road layer has also been adjusted to better match videos made using
original hardware.

A number of bug fixes allow previously unplayable Japanese home
computer games, including ﾂｵPD7220 issues affecting the Madou
Monogatari games on PC-98, the missing 1-bit DAC sound on PC-98,
broken sprites in Asuka 120% Burning Fest. on FM Towns, and background
bugs on Sharp X68000. Mac media support continues to improve, with
working CD-ROM drives on more Macs, and fixes for high density
floppy drives. The V.Smile Smart Keyboard is now supported, in US,
French, and German variants. Tim Lindner has continued to fix
long-standing bugs in Tandy CoCo 3 emulation.

Software list additions include Taiwanese Game Gear cartridges,
Master System prototypes, a big batch of software for the Australian
MicroBee series, and quite a few add-on ROMs for the Acorn BBC
Micro. We窶况e also got the latest Apple II floppy dumps and cracks,
FM Towns floppies and CDs, and PC floppies.

(wiz)

Updated devel/py-click-threading, devel/py-click-repl

(adam)

py-click-repl: updated to 0.2.0

0.2.0:
Unknown changes

(adam)

py-click-threading: updated to 0.5.0

0.5.0:
Unbreak master

(adam)

doc: Added security/gpg-tui version 0.1.4

(pin)

Add gpg-tui

(pin)

security/gpg-tui: import package

Terminal User Interface for GnuPG.

It aims to ease the key management operations such as listing/exporting/signing
by providing an interface along with the command-line fallback for more complex
operations.
It is not trying to be a full-fledged interface for all the features that gpg
provides but it tries to bring a more interactive approach to key management.

(pin)

doc: Updated math/octave to 6.2.0

(thor)

octave: udpate to 6.2.0

This updates octave and also gets some more recommened dependencies in,
namely qrupdate and Mesalib (for osmesa) and gl2ps as well as the
qscintilla editor. The glpk option is on by default again.

This version of octave comes rather close to a standard build, with
optimzied BLAS and GUI fluff. We are still missing SuiteSparse and
SUNDIALS solvers, see

  https://octave.org/doc/v6.2.0/External-Packages.html

PortAudio should also be considered, and LLVM be watched if that
experimental JIT settles in.

Upstream changes since 5.x:

Summary of important user-visible changes for version 6.1.0 (2020-11-26):
------------------------------------------------------------------------

### General improvements

- The `intersect`, `setdiff`, `setxor`, `union`, and `unique` functions
  accept a new sorting option `"stable"` which will return output values
  in the same order as the input, rather than in ascending order.

- Complex RESTful web services can now be accessed by the `webread` and
  `webwrite` functions alongside with the `weboptions` structure.  One
  major feature is the support for cookies to enable RESTful
  communication with the web service.

  Additionally, the system web browser can be opened by the `web`
  function.

- The `linspace` function now produces symmetrical sequences when the
  endpoints are symmetric.  This is more intuitive and also compatible
  with recent changes made in Matlab R2019b.

- The underlying algorithm of the `rand` function has been changed.
  For single precision outputs, the algorithm has been fixed so that it
  produces values strictly in the range (0, 1).  Previously, it could
  occasionally generate the right endpoint value of 1 (See bug #41742).
  In addition, the new implementation uses a uniform interval between
  floating point values in the range (0, 1) rather than targeting a
  uniform density (# of random integers / length along real number
  line).

- Numerical integration has been improved.  The `quadv` function has
  been re-written so that it can compute integrands of periodic
  functions.  At the same time, performance is better with ~3.5X fewer
  function evaluations required.  A bug in `quadgk` that caused complex
  path integrals specified with `"Waypoints"` to occasionally be
  calculated in the opposite direction was fixed.

- The `edit` function option `"editinplace"` now defaults to `true` and
  the option `"home"` now defaults to the empty matrix `[]`.  Files will
  no longer be copied to the user's HOME directory for editing.  The old
  behavior can be restored by setting `"editinplace"` to `false` and
  `"home"` to `"~/octave"`.

- The `format` command supports two new options: `uppercase` and
  `lowercase` (default).  With the default, print a lowercase 'e' for
  the exponent character in scientific notation and lowercase 'a-f' for
  the hex digits representing 10-15.  With `uppercase`, print 'E' and
  'A-F' instead.  The previous uppercase formats, `E` and `G`, no longer
  control the case of the output.

  Additionally, the `format` command can be called with multiple options
  for controlling the format, spacing, and case in arbitrary order.
  For example:

        format long e uppercase loose

  Note, in the case of multiple competing format options the rightmost
  one is used, and, in case of an error, the previous format remains
  unchanged.

- L-value references (e.g., increment (++), decrement (--), and all
  in-place assignment operators (+=, -=, *=, /=, etc.)) are no longer
  allowed in anonymous functions.

- New warnings have been added about questionable uses of the colon ':'
  range operator.  Each has a new warning ID so that it can be disabled
  if desired.

  >  `Octave:colon-complex-argument`  : when any arg is complex
  >  `Octave:colon-nonscalar-argument` : when any arg is non-scalar

- The `regexp` and related functions now correctly handle and *require*
  strings in UTF-8 encoding.  As with any other function that requires
  strings to be encoded in Octave's native encoding, you can use
  `native2unicode` to convert from your preferred locale.  For example,
  the copyright symbol in UTF-8 is `native2unicode (169, "latin1")`.

- The startup file `octaverc` can now be located in the platform
  dependent location for user local configuration files (e.g.,
  ${XDG_CONFIG_HOME}/octave/octaverc on Unix-like operating systems or
  %APPDATA%\octave\octaverc on Windows).

- `pkg describe` now lists dependencies and inverse dependencies
  (i.e., other installed packages that depend on the package in
  question).

- `pkg test` now tests all functions in a package.

- When unloading a package, `pkg` now checks if any remaining loaded
  packages depend on the one to be removed.  If this is the case `pkg`
  aborts with an explanatory error message.  This behavior can be
  overridden with the `-nodeps` option.

- The command

    dbstop in CLASS at METHOD

  now works to set breakpoints in classdef constructors and methods.

#### Graphics backend

- The use of Qt4 for graphics and the GUI is deprecated in Octave
  version 6 and no further bug fixes will be made.  Qt4 support will be
  removed completely in Octave version 7.

- The `legend` function has been entirely rewritten.  This fixes a
  number of historical bugs, and also implements new properties such as
  `"AutoUpdate"` and `"NumColumns"`.  The gnuplot toolkit---which is no
  longer actively maintained---still uses the old legend function.

- The `axis` function was updated which resolved 10 bugs affecting
  axes to which `"equal"` had been applied.

- Graphic primitives now accept a color property value of `"none"`
  which is useful when a particular primitive needs to be hidden
  (for example, the Y-axis of an axes object with `"ycolor" = "none"`)
  without hiding the entire primitive `"visibility" = "off"`.

- A new property `"FontSmoothing"` has been added to text and axes
  objects that controls whether anti-aliasing is used during the
  rendering of characters.  The default is `"on"` which produces smooth,
  more visually appealing text.

- The figure property `"windowscrollwheelfcn"`is now implemented.
  This makes it possible to provide a callback function to be executed
  when users manipulate the mouse wheel on a given figure.

- The figure properties `"pointer"`, `"pointershapecdata"`, and
  `"pointershapehotspot"` are now implemented.  This makes it possible
  to change the shape of the cursor (pointer in Matlab-speak) displayed
  in a plot window.

- The figure property `"paperpositionmode"` now has the default `"auto"`
  rather than `"manual"`.  This change is more intuitive and is
  Matlab compatible.

- The appearance of patterned lines `"LineStyle" = ":"|"--"|"-."` has
  been improved for small widths (`"LineWidth"` less than 1.5 pixels)
  which is a common scenario.

- Printing to EPS files now uses a tight bounding box (`"-tight"`
  argument to print) by default.  This makes more sense for EPS
  files which are normally embedded within other documents, and is
  Matlab compatible.  If necessary use the `"-loose"` option to
  reproduce figures as they appeared in previous versions of Octave.

- The following print devices are no longer officially supported: cdr,
  corel, aifm, ill, cgm, hpgl, mf and dxf.  A warning will be thrown
  when using those devices, and the code for supporting those formats
  will eventually be removed from a future version of Octave.

- The placement of text subscripts and superscripts has been
  re-engineered and now produces visually attractive results similar to
  Latex.

### Matlab compatibility

- The function `unique` now returns column index vectors for the second
  and third outputs.  When duplicate values are present, the default
  index to return is now the `"first"` occurrence.  The previous Octave
  behavior, or Matlab behavior from releases prior to R2012b, can be
  obtained by using the `"legacy"` flag.

- The function `setdiff` with the `"rows"` argument now returns Matlab
  compatible results.  The previous Octave behavior, or Matlab behavior
  from releases prior to R2012b, can be obtained by using the `"legacy"`
  flag.

- The functions `intersect`, `setxor`, and `union` now accept a
  `"legacy"` flag which changes the index values (second and third
  outputs) as well as the orientation of all outputs to match Matlab
  releases prior to R2012b.

- The function `streamtube` is Matlab compatible and plots tubes along
  streamlines which are scaled by the vector field divergence. The
  Octave-only extension `ostreamtube` can be used to visualize the flow
  expansion and contraction of the vector field due to the local
  crossflow divergence.

- The interpreter now supports handles to nested functions.

- The graphics properties `"LineWidth"` and `"MarkerSize"` are now
  measured in points, *not* pixels.  Compared to previous versions
  of Octave, some lines and markers will appear 4/3 larger.

- The meta.class property "SuperClassList" has been renamed
  "Superclasslist" for Matlab compatibility.  The original name will
  exist as an alias until Octave version 8.1.

- Inline functions created by the function `inline` are now of type
  "inline" when interrogated with the `class` function.  In previous
  versions of Octave, the class returned was "function_handle".  This
  change is Matlab compatible.  Inline functions are deprecated in
  both Matlab and Octave and support may eventually be removed.
  Anonymous functions can be used to replace all instances of inline
  functions.

- The function `javaaddpath` now prepends new directories to the
  existing dynamic classpath by default.  To append them instead, use
  the new `"-end"` argument.  Multiple directories may now be specified
  in a cell array of strings.

- An undocumented function `gui_mainfcn` has been added, for compatibility
  with figures created with Matlab's GUIDE.

- Several validator functions of type `mustBe*` have been added.  See
  the list of new functions below.

### Alphabetical list of new functions added in Octave 6

* `auto_repeat_debug_command`
* `commandhistory`
* `commandwindow`
* `filebrowser`
* `is_same_file`
* `lightangle`
* `mustBeFinite`
* `mustBeGreaterThan`
* `mustBeGreaterThanOrEqual`
* `mustBeInteger`
* `mustBeLessThan`
* `mustBeLessThanOrEqual`
* `mustBeMember`
* `mustBeNegative`
* `mustBeNonempty`
* `mustBeNonNan`
* `mustBeNonnegative`
* `mustBeNonpositive`
* `mustBeNonsparse`
* `mustBeNonzero`
* `mustBeNumeric`
* `mustBeNumericOrLogical`
* `mustBePositive`
* `mustBeReal`
* `namedargs2cell`
* `newline`
* `ode23s`
* `ostreamtube`
* `rescale`
* `rotx`
* `roty`
* `rotz`
* `stream2`
* `stream3`
* `streamline`
* `streamtube`
* `uisetfont`
* `verLessThan`
* `web`
* `weboptions`
* `webread`
* `webwrite`
* `workspace`

### Deprecated functions and properties

The following functions and properties have been deprecated in Octave 6
and will be removed from Octave 8 (or whatever version is the second
major release after 6):

- Functions

  Function              | Replacement
  -----------------------|------------------
  `runtests`            | `oruntests`

- Properties

  Object          | Property      | Value
  -----------------|---------------|------------
                  |              |

- The environment variable used by `mkoctfile` for linker flags is now
  `LDFLAGS` rather than `LFLAGS`.  `LFLAGS` is deprecated, and a warning
  is emitted if it is used, but it will continue to work.

### Removed functions and properties

The following functions and properties were deprecated in Octave 4.4
and have been removed from Octave 6.

- Functions

  Function            | Replacement
  ---------------------|------------------
  `chop`              | `sprintf` for visual results
  `desktop`            | `isguirunning`
  `tmpnam`            | `tempname`
  `toascii`            | `double`
  `java2mat`          | `__java2mat__`

- Properties

  Object              | Property                  | Value
  ---------------------|---------------------------|-----------------------
  `annotation`        | `edgecolor ("rectangle")` |
  `axes`              | `drawmode`                |
  `figure`            | `doublebuffer`            |
                      | `mincolormap`            |
                      | `wvisual`                |
                      | `wvisualmode`            |
                      | `xdisplay`                |
                      | `xvisual`                |
                      | `xvisualmode`            |
  `line`              | `interpreter`            |
  `patch`              | `interpreter`            |
  `surface`            | `interpreter`            |
  `text`              | `fontweight`              | `"demi"` and `"light"`
  `uibuttongroup`      | `fontweight`              | `"demi"` and `"light"`
  `uicontrol`          | `fontweight`              | `"demi"` and `"light"`
  `uipanel`            | `fontweight`              | `"demi"` and `"light"`
  `uitable`            | `fontweight`              | `"demi"` and `"light"`

(thor)

math/py-scikit-learn: drop ineffective SKLEARN_NO_OPENMP

It is wrong to disable OpenMP and this setting does nothing anyway.
Maybe it did in the past. Now, the build tries to use OpenMP if
possible and this is the right thing to do.

Repeat: This change doesn't affect the build at all since that variable
is not checked (since some time?).

(thor)

doc: Updated pkgtools/rc.subr to 20210517

(khorben)

rc.subr: update to version 20210517

This is part 2 to support additional platforms with the RC scripts provided in
pkgsrc, in privileged as well as in unprivileged mode, including on NetBSD.

These changes:
- install rc.subr to PKG_SYSCONFDIR if SYSCONFBASE is not /etc
- let RC scripts source rc.subr in PKG_SYSCONFDIR
- effectively allow unprivileged setups to run RC scripts easily
- in addition, give a chance for more platforms to run RC scripts

Tested in privileged and unprivileged modes on NetBSD/amd64, and unprivileged
mode on Darwin/amd64; submitted for review on tech-pkg@.

(khorben)

Introduce a new SYSCONFBASE variable (defaults to /etc)

This is part 1 to support additional platforms with the RC scripts provided in
pkgsrc, in privileged as well as in unprivileged mode, including on NetBSD
(with part 2 in pkgtools/rc.subr).

This variable is meant to point to the configuration directory of the base
system (as opposed to pkgsrc's own prefix) when it should be used by pkgsrc in
special cases (e.g. installing RC scripts), or to point to the existing
PKG_SYSCONFBASE directory otherwise (e.g. for any unprivileged bootstrap).
This teaches pkgsrc where the RC scripts should be installed, and more
importantly, where the local copy of rc.subr can be expected. Part 3 will
progressively update each and every RC script to substitute this path as
expected.

No functional changes are intended in privileged mode without a bootstrap. The
only variable affected by this change directly is RCD_SCRIPTS_DIR, which
currently remains with the same default of /etc/rc.d, and can be overridden as
before.

When bootstrapping, SYSCONFBASE also remains with the existing default when no
prefix is set or is "/usr/pkg" or "/usr"; it is set to $prefix/etc otherwise. It
can be specified specifically with --sysconfbase if necessary.

Existing installations or bootstraps are not affected, as this change needs
setting SYSCONFBASE in the corresponding $sysconfdir/mk.conf to have an impact.

Tested in privileged and unprivileged modes on NetBSD/amd64, and unprivileged
mode on Darwin/amd64; submitted for review on tech-pkg@.

(khorben)

doc: Updated print/py-octoprint to 1.6.1

(khorben)

py-octoprint: update to version 1.6.1

This is a bugfix release to fix two bugs in 1.6.0.

The full list of changes from version 1.5.3 to 1.6.0 can be found at
https://github.com/OctoPrint/OctoPrint/releases/tag/1.6.0.

This also improves the RC script provided to not longer assume Python 3.8
specifically.

(khorben)

doc: Updated archivers/py-zipstream to 1.1.8

(khorben)

py-zipstream: update to version 1.1.8

Changes made after forking v1.1.4:

v1.1.5 (2019-03-18)

* Support Zip64 when compressing iterables and strings (https://github.com/allanlei/python-zipstream/pull/25)

v1.1.6 (2019-06-06)

* Add partial flushing of ZipStreams (https://github.com/arjan-s/python-zipstream/pull/1)

v1.1.7 (2019-10-22)

* Stream data in the order it was received (https://github.com/arjan-s/python-zipstream/pull/4)

v1.1.8 (2020-09-14)

* New datetime parameter in write_iter (https://github.com/arjan-s/python-zipstream/pull/8)

(khorben)

doc: Added devel/py-immutabledict version 2.0.0

(khorben)

Add py-immutabledict

(khorben)

py-immutabledict: import version 2.0.0

immutable is a fork of frozendict, an immutable wrapper around dictionaries.

It implements the complete mapping interface. It can be used as a drop-in
replacement for dictionaries where immutability is desired. The immutabledict
constructor mimics dict, and all of the expected interfaces (iter, len, repr,
hash, getitem) are provided. Note that an immutabledict does not guarantee the
immutability of its values, so the utility of hash method is restricted by
usage.

The only difference is that the copy() method of immutable takes variable
keyword arguments, which will be present as key/value pairs in the new,
immutable copy.

(khorben)

doc: Updated print/py-octoprint-filecheck to 2021.2.23

(khorben)

py-octoprint-filecheck: update to version 2021.2.23

The changes include:

* #2 Fix native grep not always being in extended regex mode
* Add a "Prerelease" release channel
* Code now uses pre-commit, black, prettier, isort and flake8 just like OctoPrint itself.

In turn, this is required to update py-octoprint to version 1.6.1.

(khorben)

doc: Updated print/py-octoprint-firmwarecheck to 2021.2.4

(khorben)

py-octoprint-firmwarecheck: update to version 2021.2.4

The changes include:

* Add removable info message when a firmware development build is detected
* Add a "Prerelease" release channel
* Code now uses pre-commit, black, prettier, isort and flake8 just like OctoPrint itself.

In turn, this is required to update py-octoprint to version 1.6.1.

(khorben)

doc: Added print/py-octoprint-pisupport version 2021.3.26.post2

(khorben)

Add py-octoprint-pisupport

(khorben)

py-octoprint-pisupport: import version 2021.3.26post2

The Pi Support plugin for OctoPrint provides additional information about your
Pi in the UI and also alerts you about undervoltage or overheating issues
observed on your Pi or if your Pi is unsupported. If you are running OctoPi,
the Pi Support plugin will also provide additional information about that.

OctoPrint will only load this plugin when it detects that it is being run on a
Raspberry Pi.

(khorben)

net/samba4: handle dbus dependency explicitly on Linux

This manifests as the snapper vfs files appearing depending on dbus
being present or not on Linux, causing PLIST mismatch. This option
actually disables this if desired. The default is still on, as
dbus is to be expected on modern Linux installs anyway.

(thor)

sysutils/mc: add explicit handling of samba and sftp vfs as options

(thor)

Note update of security/vault to 1.6.5.

(he)

Upgrade security/vault to version 1.6.5.

Pkgsrc changes:
* None

Upstream changes:

v1.6.5:
May 20th, 2021

SECURITY:
* Non-Expiring Leases: Vault and Vault Enterprise renewed
  nearly-expiring token leases and dynamic secret leases with a
  zero-second TTL, causing them to be treated as non-expiring,
  and never revoked. This issue affects Vault and Vault Enterprise
  versions 0.10.0 through 1.7.1, and is fixed in 1.5.9, 1.6.5,
  and 1.7.2 (CVE-2021-32923).

CHANGES:
* agent: Update to use IAM Service Account Credentials endpoint
  for signing JWTs when using GCP Auto-Auth method [GH-11473]
* auth/gcp: Update to v0.8.1 to use IAM Service Account Credentials
  API for signing JWTs [GH-11498]

BUG FIXES:
* core (enterprise): Fix plugins mounted in namespaces being
  unable to use password policies [GH-11596]
* core: correct logic for renewal of leases nearing their expiration
  time. [GH-11650]
* secrets/database: Fix marshalling to allow providing numeric
  arguments to external database plugins. [GH-11451]
* secrets/database: Fixes issue for V4 database interface where
  SetCredentials wasn't falling back to using RotateRootCredentials
  if SetCredentials is Unimplemented [GH-11585]
* ui: Fix namespace-bug on login [GH-11182]

v1.6.4:
April 21, 2021
Release vault v1.6.4

v1.6.3
February 25, 2021

SECURITY:
* Limited Unauthenticated License Read: We addressed a security
  vulnerability that allowed for the unauthenticated reading of
  Vault licenses from DR Secondaries. This vulnerability affects
  Vault and Vault Enterprise and is fixed in 1.6.3 (CVE-2021-27668).

CHANGES:
* secrets/mongodbatlas: Move from whitelist to access list API [GH-10966]

IMPROVEMENTS:
* ui: Clarify language on usage metrics page empty state [GH-10951]

BUG FIXES:
* auth/kubernetes: Cancel API calls to TokenReview endpoint when
  request context is closed [GH-10930]
* core/identity: Fix deadlock in entity merge endpoint. [GH-10877]
* quotas: Fix duplicate quotas on performance standby nodes. [GH-10855]
* quotas/rate-limit: Fix quotas enforcing old rate limit quota paths [GH-10689]
  replication (enterprise): Don't write request count data on DR Secondaries.
* Fixes DR Secondaries becoming out of sync approximately every 30s. [GH-10970]
* secrets/azure (enterprise): Forward service principal credential
  creation to the primary cluster if called on a performance
  standby or performance secondary. [GH-10902]

(he)

doc: Updated finance/rates to 0.5.0

(pin)

finance/rates: update to 0.5.0

-Improve input handling

(pin)

mariadb*: cmake does not CPPFLAGS

(nia)

doc: Updated time/R-lubridate to 1.7.10

(mef)

(time/R-lubridate)  Updated 1.7.4 to 1.7.10

Version 1.7.10
==============

### NEW FEATURES

* `fast_strptime()` and `parse_date_time2()` now accept multiple formats and apply them in turn

### BUG FIXES

* [#926](https://github.com/tidyverse/lubridate/issues/926) Fix incorrect division of intervals by months involving leap years
* Fix incorrect skipping of digits during parsing of the `%z` format

Version 1.7.9.2
===============

### NEW FEATURES

* [#914](https://github.com/tidyverse/lubridate/issues/914) New `rollforward()` function
* [#928](https://github.com/tidyverse/lubridate/issues/928) On startup lubridate now resets TZDIR to a proper directory when it is set to non-dir values like "internal" or "macOS" (a change introduced in R4.0.2)
* [#630](https://github.com/tidyverse/lubridate/issues/630) New parsing functions `ym()` and `my()`

### BUG FIXES

* [#930](https://github.com/tidyverse/lubridate/issues/930) `as.period()` on intervals now returns valid Periods with double fields (not integers)

Version 1.7.9
=============

### NEW FEATURES

* [#871](https://github.com/tidyverse/lubridate/issues/893) Add `vctrs` support

### BUG FIXES

* [#890](https://github.com/tidyverse/lubridate/issues/890) Correctly compute year in `quarter(..., with_year = TRUE)`
* [#893](https://github.com/tidyverse/lubridate/issues/893) Fix incorrect parsing of abbreviated months in locales with trailing dot (regression in v1.7.8)
* [#886](https://github.com/tidyverse/lubridate/issues/886) Fix `with_tz()` for POSIXlt objects
* [#887](https://github.com/tidyverse/lubridate/issues/887) Error on invalid numeric input to `month()`
* [#889](https://github.com/tidyverse/lubridate/issues/889) Export new dmonth function

Version 1.7.8
=============

### NEW FEATURES

* (breaking) Year and month durations now assume 365.25 days in a year consistently in conversion and constructors. Particularly `dyears(1) == years(1)` is now `TRUE`.
* Format and print methods for 0-length objects are more consistent.
* New duration constructor `dmonths()` to complement other duration constructors.
*
* `duration()` constructor now accepts `months` and `years` arguments.
* [#629](https://github.com/tidyverse/lubridate/issues/629) Added `format_ISO8601()` methods.
* [#672](https://github.com/tidyverse/lubridate/issues/672) Eliminate all partial argument matches
* [#674](https://github.com/tidyverse/lubridate/issues/674) `as_date()` now ignores the `tz` argument
* [#675](https://github.com/tidyverse/lubridate/issues/675) `force_tz()`, `with_tz()`, `tz<-` convert dates to date-times
* [#681](https://github.com/tidyverse/lubridate/issues/681) New constants `NA_Date_` and `NA_POSIXct_` which parallel built-in primitive constants.
* [#681](https://github.com/tidyverse/lubridate/issues/681) New constructors `Date()` and `POSIXct()` which parallel built-in primitive constructors.
* [#695](https://github.com/tidyverse/lubridate/issues/695) Durations can now be compared with numeric vectors.
* [#707](https://github.com/tidyverse/lubridate/issues/707) Constructors return 0-length inputs when called with no arguments
* [#713](https://github.com/tidyverse/lubridate/issues/713) (breaking) `as_datetime()` always returns a `POSIXct()`
* [#717](https://github.com/tidyverse/lubridate/issues/717) Common generics are now defined in `generics` dependency package.
* [#719](https://github.com/tidyverse/lubridate/issues/719) Negative Durations are now displayed with leading `-`.
* [#829](https://github.com/tidyverse/lubridate/issues/829) `%within%` throws more meaningful messages when applied on unsupported classes
* [#831](https://github.com/tidyverse/lubridate/issues/831) Changing hour, minute or second of Date object now yields POSIXct.
* [#869](https://github.com/tidyverse/lubridate/issues/869) Propagate NAs to all internal components of a Period object

### BUG FIXES

* [#682](https://github.com/tidyverse/lubridate/issues/682) Fix quarter extraction with small `fiscal_start`s.
* [#703](https://github.com/tidyverse/lubridate/issues/703) `leap_year()` works with objects supported by `year()`.
* [#778](https://github.com/tidyverse/lubridate/issues/778) `duration()/period()/make_difftime()` work with repeated units
* `c.Period` concatenation doesn't fail with empty components.
* Honor `exact = TRUE` argument in `parse_date_time2`, which was so far ignored.

Version 1.7.4
=============

### NEW FEATURES

* [#658](https://github.com/tidyverse/lubridate/issues/658) `%within%` now accepts a list of intervals, in which case an instant is checked if it occurs within any of the supplied intervals.

### CHANGES

* [#661](https://github.com/tidyverse/lubridate/issues/661) Throw error on invalid multi-unit rounding.
* [#633](https://github.com/tidyverse/lubridate/issues/633) `%%` on intervals relies on `%m+` arithmetic and doesn't produce NAs when intermediate computations result in non-existent dates.
* `tz()` always returns "UTC" when `tzone` attribute cannot be inferred.

### BUG FIXES

* [#664](https://github.com/tidyverse/lubridate/issues/664) Fix lookup of period functions in `as.period`
* [#649](https://github.com/tidyverse/lubridate/issues/664) Fix system timezone memoization

Version 1.7.3
=============

### BUG FIXES

* [#643](https://github.com/tidyverse/lubridate/issues/643), [#640](https://github.com/tidyverse/lubridate/issues/640), [#645](https://github.com/tidyverse/lubridate/issues/645) Fix faulty caching of system timezone.

(mef)