doc: Removed databases/ruby-arel30

(taca)

databases/ruby-arel30: remove package

Remove ruby-arel30 package which is kept for ruby-activerecord32 package.

(taca)

databases/Makefile: remove ruby-arel30

(taca)

doc: remove Ruby on Rails 3.2 packages

www/ruby-rails32
devel/ruby-railties32
mail/ruby-actionmailer32
www/ruby-actionpack32
www/ruby-activeresource32
databases/ruby-activerecord32
devel/ruby-activemodel32
devel/ruby-activesupport32

(taca)

devel/ruby-activesupport32: remove package

Remove ruby-activesupport32, a part of Ruby on Rails 3.2 packages which is
already EOL.

(taca)

devel/ruby-activemodel32: remove package

Remove ruby-activemodel32, a part of Ruby on Rails 3.2 packages which is
already EOL.

(taca)

devel/Makefile: remove ruby-activemodel32 and ruby-activesupport32

(taca)

databases/ruby-activerecord32: remove package

Remove ruby-activerecord32, a part of Ruby on Rails 3.2 packages which is
already EOL.

(taca)

databases/Makefile: remove ruby-activerecord32

(taca)

www/ruby-activeresource32: remove package

Remove ruby-activeresource32, a part of Ruby on Rails 3.2 packages which is
already EOL.

(taca)

www/ruby-actionpack32:: remove package

Remove ruby-actionpack32, a part of Ruby on Rails 3.2 packages which is
already EOL.

(taca)

www/Makefile: remove ruby-actionpack32 and ruby-activeresource32

(taca)

mail/ruby-actionmailer32: remove package

Remove ruby-actionmailer32, a part of Ruby on Rails 3.2 packages which is
already EOL.

(taca)

mail/Makefile: remove ruby-actionmailer32

(taca)

Bump NetBSD/i386 bootstrap kit to 1.33.0, natively built on 8.0.

(he)

devel/ruby-railties32: remove package

Remove ruby-railties32, a part of Ruby on Rails 3.2 packages which is
already EOL.

(taca)

devel/Makefile: remove ruby-railties32

(taca)

www/ruby-rails32: remove package

Start remove of Ruby on Rails 3.2 packages which is already EOL.

(taca)

doc: Removed www/ruby-sass-rails32

(taca)

www/ruby-sass-rails32: remove package

Remove ruby-sass-rails32 package which supported by Ruby on Rails 3.2.

(taca)

www/Makefile: remove ruby-rails32 and ruby-sass-rails32.

(taca)

doc: Removed www/ruby-coffee-rails32

(taca)

www/ruby-coffee-rails32: remove package

Remove ruby-coffee-rails32 package which supported by Ruby on Rails 3.2.

(taca)

doc: Added www/ruby-coffee-rails version 4.2.2

(taca)

www/Makefile: replace ruby-coffee-rails32 with ruby-coffee-rails

(taca)

www/ruby-coffee-rails: add package version 4.2.2

Add ruby-coffee-rails package version 4.2.2 which supported by Ruby on
Rails 4.2 and later.

CoffeeScript adapter for the Rails asset pipeline.  Also adds support to use
CoffeeScript to respond to JavaScript requests (use `.coffee` views).

(taca)

doc: note remove of ruby-dm-active_model and ruby-dm-rails

databases/ruby-dm-active_model
databases/ruby-dm-rails

(taca)

databases/ruby-dm-rails: remove package

Remove ruby-dm-rails_model package which supported by Ruby on Rails 3.2.

(taca)

databases/ruby-dm-active_model: remove package

Remove ruby-dm-active_model package which supported by Ruby on Rails 3.2.

(taca)

databases/Makefile: remove ruby-dm-active_model and ruby-dm-rails

Remove ruby-dm-active_model and ruby-dm-rails.

(taca)

lang/ruby/rails.mk: switch default rails to 4.2

Switch default Ruby on Rails version to 4.2.

(taca)

doc: Updated databases/ruby-sequel to 5.18.0

(taca)

databases/ruby-sequel update to 5.18.0

=== 5.18.0 (2019-03-01)

* Use singleton .call methods on plain objects instead of procs/methods for faster type conversion (jeremyevans)

* Add Sequel::SQL::Blob.call to avoid indirection when converting values from the database (jeremyevans)

* Use while instead of each for inner loops in sqlite and jdbc adapters for better performance (jeremyevans)

* Make after_initialize plugin not make the argument to Model.call optional (jeremyevans)

* Allow Dataset#paged_each to be called without a block in the postgres and mysql2 adapters (jeremyevans)

* Remove flow-control exceptions in connection_expiration and connection_validator extensions (jeremyevans)

* Add throw_failures plugin for throwing ValidationFailed and HookFailed exceptions instead of raising them, up to 10x performance increase on JRuby (jeremyevans)

* Support tzinfo 2 in addition to tzinfo 1 in the named_timezones extension (jeremyevans) (#1596)

(taca)

doc: note remove of F-PROT Antivirus packages

security/f-prot-antivirus6-ms-bin
security/f-prot-antivirus6-fs-bin
security/f-prot-antivirus6-ws-bin

(taca)

security/f-prot-antivirus6: remove files for f-prot-antivirus6-*-bin

Remove common files for f-prot-antivirus6-*-bin packages.

(taca)

security/f-prot-antivirus6-ws-bin: remove package

Remove f-prot-antivirus6-ws-bin package version 6.2.3.

Althoguth F-PROT Antivirus is still supported for licensed users,
its antivirus engine (i.e. program itself) did not updated since 2013 and
it is sold for Linux and Windows (no *BSD).

So it's time to remove it from pkgsrc.

(taca)

security/f-prot-antivirus6-fs-bin: remove package

Remove f-prot-antivirus6-fs-bin package version 6.2.3.

Althoguth F-PROT Antivirus is still supported for licensed users,
its antivirus engine (i.e. program itself) did not updated since 2013 and
it is sold for Linux and Windows (no *BSD).

So it's time to remove it from pkgsrc.

(taca)

security/Makefile: remove f-prot-antivirus6*

(taca)

security/f-prot-antivirus6-ms-bin: remove package

Remove f-prot-antivirus6-ms-bin package version 6.2.3.

Althoguth F-PROT Antivirus is still supported for licensed users,
its antivirus engine (i.e. program itself) did not updated since 2013 and
it is sold for Linux and Windows (no *BSD).

So it's time to remove it from pkgsrc.

(taca)

doc: Updated databases/freetds to 1.00.111

(taca)

databases/freetds: update to 1.00.111

Update freetds to 1.00.111.

Various bug fixes and please refer ChangeLog in detail.

<https://github.com/FreeTDS/freetds/blob/Branch-1_00/ChangeLog>

(taca)

doc: Add Ruby on Rails 5.2.2 packages

devel/ruby-activesupport52
devel/ruby-activemodel52
devel/ruby-activejob52
www/ruby-actionview52
www/ruby-actionpack52
www/ruby-actioncable52
databases/ruby-activerecord52
devel/ruby-activestorage52
mail/ruby-actionmailer52
devel/ruby-railties52
www/ruby-rails52

(taca)

www/Makefile: add ruby-rails52

(taca)

www/ruby-rails52: add version 5.2.2 package

Add ruby-rails52 version 5.2.2 package.

Ruby on Rails is a full-stack web framework optimized for programmer
happiness and sustainable productivity.  It encourages beautiful code
by favoring convention over configuration.

This is for Ruby on Rails 5.2.

(taca)

devel/Makefile: add ruby-railties52

(taca)

devel/ruby-railties52: add version 5.2.2 package

Add ruby-railties52 version 5.2.2 package.

= Railties -- Gluing the Engine to the Rails

Railties is responsible to glue all frameworks together. Overall, it:

* handles all the bootstrapping process for a Rails application;

* manager rails command line interface;

* provides Rails generators core;

This is for Ruby on Rails 5.2.

(taca)

mail/Makefile: add ruby-actionmailer52

(taca)

mail/ruby-actionmailer52: add version 5.2.2 package

Add ruby-actionmailer52 version 5.2.2 package.

Action Mailer is a framework for designing email-service layers. These layers
are used to consolidate code for sending out forgotten passwords, welcome
wishes on signup, invoices for billing, and any other use case that requires
a written notification to either a person or another system.

Action Mailer is in essence a wrapper around Action Controller and the
Mail gem.  It provides a way to make emails using templates in the same
way that Action Controller renders views using templates.

Additionally, an Action Mailer class can be used to process incoming email,
such as allowing a weblog to accept new posts from an email (which could even
have been sent from a phone).

This is for Ruby on Rails 5.2.

(taca)

devel/Makefile: add ruby-activestorage52

(taca)

devel/ruby-activestorage52: add version 5.2.2 package

Add ruby-activestorage52 version 5.2.2 package.

# Active Storage

Active Storage makes it simple to upload and reference files in cloud services
like [Amazon S3](https://aws.amazon.com/s3/), [Google Cloud
Storage](https://cloud.google.com/storage/docs/), or [Microsoft Azure
Storage](https://azure.microsoft.com/en-us/services/storage/), and attach
those files to Active Records.  Supports having one main service and mirrors
in other services for redundancy.  It also provides a disk service for testing
or local deployments, but the focus is on cloud storage.

Files can be uploaded from the server to the cloud or directly from the client
to the cloud.

Image files can furthermore be transformed using on-demand variants for
quality, aspect ratio, size, or any other
[MiniMagick](https://github.com/minimagick/minimagick) supported
transformation.

This is for Ruby on Rails 5.2.

(taca)

databases/Makefile: add ruby-activerecord52

(taca)

databases/ruby-activerecord52: add version 5.2.2 package

Add ruby-activerecord52 version 5.2.2 package.

= Active Record -- Object-relational mapping put on rails

Active Record connects classes to relational database tables to establish an
almost zero-configuration persistence layer for applications. The library
provides a base class that, when subclassed, sets up a mapping between the new
class and an existing table in the database. In context of an application,
these classes are commonly referred to as *models*. Models can also be
connected to other models; this is done by defining *associations*.

This is for Ruby on Rails 5.2.

(taca)

www/Makefile: add ruby-{actioncable,actionpack,actionview}52

(taca)

www/ruby-actioncable52: add version 5.2.2 package

Add ruby-actioncable52 version 5.2.2 package.

# Action Cable – Integrated WebSockets for Rails

Action Cable seamlessly integrates WebSockets with the rest of your Rails
application.  It allows for real-time features to be written in Ruby in the
same style and form as the rest of your Rails application, while still being
performant and scalable.  It's a full-stack offering that provides both a
client-side JavaScript framework and a server-side Ruby framework.  You have
access to your full domain model written with Active Record or your ORM of
choice.

This is for Ruby on Rails 5.2.

(taca)

www/ruby-actionpack52: add version 5.2.2 package

Add ruby-actionpack52 version 5.2.2 package.

Action Pack is a framework for handling and responding to web requests. It
provides mechanisms for *routing* (mapping request URLs to actions), defining
*controllers* that implement actions, and generating responses by rendering
*views*, which are templates of various formats. In short, Action Pack
provides the view and controller layers in the MVC paradigm.

This is for Ruby on Rails 5.2.

(taca)

www/ruby-actionview52: add version 5.2.2 package

Add ruby-actionview52 version 5.2.2 package.

Action View provides simple, battle-tested conventions and helpers for
building web pages.

This is for Ruby on Rails 5.2.

(taca)

devel/Makefile: add ruby-{activejob,activemodel,activesupport}52

(taca)

devel/ruby-activejob52: add version 5.2.2 package

Add ruby-activejob52 version 5.2.2 package.

Active Job is a framework for declaring jobs and making them run on a
variety of queueing backends. These jobs can be everything from
regularly scheduled clean-ups, to billing charges, to
mailings. Anything that can be chopped up into small units of work and
run in parallel, really.

It also serves as the backend for Action Mailer's #deliver_later
functionality that makes it easy to turn any mailing into a job for
running later. That's one of the most common jobs in a modern web
application: Sending emails outside of the request-response cycle, so
the user doesn't have to wait on it.

The main point is to ensure that all Rails apps will have a job
infrastructure in place, even if it's in the form of an "immediate
runner". We can then have framework features and other gems build on
top of that, without having to worry about API differences between
Delayed Job and Resque. Picking your queuing backend becomes more of
an operational concern, then. And you'll be able to switch between
them without having to rewrite your jobs.

This is for Ruby on Rails 5.2.

(taca)

devel/ruby-activemodel52: add version 5.2.2 package

Add ruby-activemodel52 version 5.2.2 package.

Active Model provides a known set of interfaces for usage in model classes.
They allow for Action Pack helpers to interact with non-ActiveRecord models,
for example. Active Model also helps building custom ORMs for use outside of
the Rails framework.

This is for Ruby on Rails 5.2.

(taca)

devel/ruby-activesupport52: add version 5.2.2 package

Add ruby-activesupport52 version 5.2.2 package.

A toolkit of support libraries and Ruby core extensions extracted from
the Rails framework. Rich support for multibyte strings,
internationalization, time zones, and testing.

This is for Ruby on Rails 5.2.

(taca)

lang/ruby/rails.mk: add support for Ruby on Rails 5.2

Add support for Ruby on Rails 5.2.

(taca)

doc: note update of www/ruby-actionpack32 and www/ruby-actionpack42

www/ruby-actionpack32 3.2.22.5nb1
www/ruby-actionpack42 4.2.11nb1

(taca)

www/ruby-actionpack42: depends on ruby-rack-test06

Change dependency from ruby-rack-test to ruby-rack-test06.

Bump PKGREVISION.

(taca)

www/ruby-actionpack32: depends on ruby-rack-test06

Change dependency from ruby-rack-test to ruby-rack-test06.

(taca)

doc: Added www/ruby-rack-test06 version 0.6.3

(taca)

www/Makefile: add and enable ruby-rack-test06

(taca)

www/ruby-rack-test06: re-add ruby-rack-test 0.6.3

Add ruby-rack-test package version 0.6.3 as ruby-rack-test06.

(taca)

dwm: fix build with older fontconfig

From and thanks to <maya> for patching it in x11/dmenu!

(leot)

dmenu: fix build on older fontconfig (NetBSD 8.0)

(maya)

Updated devel/py-parameterized, security/py-asyncssh

(adam)

py-asyncssh: updated to 1.16.0

1.16.0:
Added support for Ed448 host/client keys and certificates and rewrote Ed25519 support to use the PyCA implementation, reducing the dependency on libnacl and libsodium to only be needed to support the chacha20-poly1305 cipher.
Added support for PKCS-8 format Ed25519 and Ed448 private and public keys (in addition to the OpenSSH format previously supported).
Added support for multiple delimiters in SSHReader窶冱 readuntil() function, causing it to return data as soon as any of the specified delimiters are matched.
Added the ability to register custom key handlers in the line editor which can modify the input line, extending the built-in editing functionality.
Added SSHSubprocessProtocol and SSHSubprocessTransport classes to provide compatibility with asyncio.SubprocessProtocol and asyncio.SubprocessTransport. Code which is designed to call BaseEventLoop.subprocess_shell() or BaseEventLoop.subprocess_exec() can be easily adapted to work against a remote process by calling SSHClientConnection.create_subprocess().
Added support for sending keepalive messages when the SSH connection is idle, with an option to automatically disconnect the connection if the remote system doesn窶冲 respond to these keepalives.
Changed AsyncSSH to ignore errors when loading unsupported key types from the default file locations.
Changed the reuse_port option to only be available on Python releases which support it (3.4.4 and later).
Fixed an issue where MSG_IGNORE packets could sometimes be sent between MSG_NEWKEYS and MSG_EXT_INFO, which caused some SSH implementations to fail to properly parse the MSG_EXT_INFO.
Fixed a couple of errors in the handling of disconnects occurring prior to authentication completing.
Renamed 窶徭ession_encoding窶� and 窶徭ession_errors窶� arguments in asyncssh.create_server() to 窶彳ncoding窶� and 窶彳rrors窶�, to match the names used for these arguments in other AsyncSSH APIs. The old names are still supported for now, but they are marked as deprecated and will be removed in a future release.

(adam)

py-parameterized: updated to 0.7.0

0.7.0:
* Added parameterized_class feature, for parameterizing entire test
  classes
* Fix DeprecationWarning on inspect.getargs

(adam)

Updated devel/py-isort, devel/py-attrs

(adam)

py-attrs: updated to 19.1.0

19.1.0:
Backward-incompatible Changes
- Fixed a bug where deserialized objects with cache_hash=True could have incorrect hash code values.
  This change breaks classes with cache_hash=True when a custom __setstate__ is present.
  An exception will be thrown when applying the attrs annotation to such a class.

Changes
- Add is_callable, deep_iterable, and deep_mapping validators.
  * is_callable: validates that a value is callable
  * deep_iterable: Allows recursion down into an iterable,
    applying another validator to every member in the iterable
    as well as applying an optional validator to the iterable itself.
  * deep_mapping: Allows recursion down into the items in a mapping object,
    applying a key validator and a value validator to the key and value in every item.
    Also applies an optional validator to the mapping object itself.
  You can find them in the attr.validators package.
- Fixed stub files to prevent errors raised by mypy's disallow_any_generics = True option.
- Attributes with init=False now can follow after kw_only=True attributes.
- attrs now has first class support for defining exception classes.

  If you define a class using @attr.s(auto_exc=True) and subclass an exception, the class will behave like a well-behaved exception class including an appropriate __str__ method, and all attributes additionally available in an args attribute.
- Clarified documentation for hashing to warn that hashable objects should be deeply immutable (in their usage, even if this is not enforced).

(adam)

py-isort: updated to 4.3.10

4.3.10:
- Fixed Windows incompatibilities
- Fixed relative import sorting bug
- Fixed "no_lines_before" to also be respected from previous empty sections.
- Fixed slow-down introduced by finders mechanism by adding a LRU cache
- Fixed issue 842 default encoding not-set in Python2
- Restored Windows automated testing
- Added Mac automated testing

(adam)

python27: clean-up SUBST to match other Python versions

(adam)

emulators/gxemul: Fix console data loss

Set the SA_RESTART flag on SIGALRM so that it will not interrupt
writes to the console causing loss of console data.  Bump PKGREVISION.

(gson)

ham/uhd: PLIST* were adjusted for 4 combinations of options, doxygen/manual.

Thanks Tobias Nygren for suggestions ( I need double check later).

(mef)

Hmm, overlooked generating distinfo for patches.

(he)

Note update of lang/rust to 1.33.0.

(he)

Update rust to version 1.33.0.

Pkgsrc changes:
* Bump required rust version to build to 1.32.0.
* Adapt patches to changed file locations.
* Since we now patch some more vendor/ modules, doctor the corresponding
  .cargo-checksum.json files accordingly

Upstream changes:

Version 1.33.0 (2019-02-28)
==========================

Language
--------
- [You can now use the `cfg(target_vendor)` attribute.][57465] E.g.
  `#[cfg(target_vendor="apple")] fn main() { println!("Hello Apple!"); }`
- [Integer patterns such as in a match expression can now be exhaustive.][56362]
  E.g. You can have match statement on a `u8` that covers `0..=255` and
  you would no longer be required to have a `_ => unreachable!()` case.
- [You can now have multiple patterns in `if let` and `while let`
  expressions.][57532] You can do this with the same syntax as a `match`
  expression. E.g.
  ```rust
  enum Creature {
      Crab(String),
      Lobster(String),
      Person(String),
  }

  fn main() {
      let state = Creature::Crab("Ferris");

      if let Creature::Crab(name) | Creature::Person(name) = state {
          println!("This creature's name is: {}", name);
      }
  }
  ```
- [You can now have irrefutable `if let` and `while let` patterns.][57535]
  Using this feature will by default produce a warning as this behaviour
  can be unintuitive. E.g. `if let _ = 5 {}`
- [You can now use `let` bindings, assignments, expression statements,
  and irrefutable pattern destructuring in const functions.][57175]
- [You can now call unsafe const functions.][57067] E.g.
  ```rust
  const unsafe fn foo() -> i32 { 5 }
  const fn bar() -> i32 {
      unsafe { foo() }
  }
  ```
- [You can now specify multiple attributes in a `cfg_attr` attribute.][57332]
  E.g. `#[cfg_attr(all(), must_use, optimize)]`
- [You can now specify a specific alignment with the `#[repr(packed)]`
  attribute.][57049] E.g. `#[repr(packed(2))] struct Foo(i16, i32);` is a
  struct with an alignment of 2 bytes and a size of 6 bytes.
- [You can now import an item from a module as an `_`.][56303] This allows you
  to import a trait's impls, and not have the name in the namespace. E.g.
  ```rust
  use std::io::Read as _;

  // Allowed as there is only one `Read` in the module.
  pub trait Read {}
  ```
- [You may now use `Rc`, `Arc`, and `Pin` as method receivers][56805].

Compiler
--------
- [You can now set a linker flavor for `rustc` with the `-Clinker-flavor`
  command line argument.][56351]
- [The mininum required LLVM version has been bumped to 6.0.][56642]
- [Added support for the PowerPC64 architecture on FreeBSD.][57615]
- [The `x86_64-fortanix-unknown-sgx` target support has been upgraded to
  tier 2 support.][57130] Visit the [platform support][platform-support]
  page for information on Rust's platform support.
- [Added support for the `thumbv7neon-linux-androideabi` and
  `thumbv7neon-unknown-linux-gnueabihf` targets.][56947]
- [Added support for the `x86_64-unknown-uefi` target.][56769]

Libraries
---------
- [The methods `overflowing_{add, sub, mul, shl, shr}` are now `const`
  functions for all numeric types.][57566]
- [The methods `rotate_left`, `rotate_right`, and `wrapping_{add, sub, mul,
  shl, shr}`
  are now `const` functions for all numeric types.][57105]
- [The methods `is_positive` and `is_negative` are now `const` functions for
  all signed numeric types.][57105]
- [The `get` method for all `NonZero` types is now `const`.][57167]
- [The methods `count_ones`, `count_zeros`, `leading_zeros`, `trailing_zeros`,
  `swap_bytes`, `from_be`, `from_le`, `to_be`, `to_le` are now `const` for all
  numeric types.][57234]
- [`Ipv4Addr::new` is now a `const` function][57234]

Stabilized APIs
---------------
- [`unix::FileExt::read_exact_at`]
- [`unix::FileExt::write_all_at`]
- [`Option::transpose`]
- [`Result::transpose`]
- [`convert::identity`]
- [`pin::Pin`]
- [`marker::Unpin`]
- [`marker::PhantomPinned`]
- [`Vec::resize_with`]
- [`VecDeque::resize_with`]
- [`Duration::as_millis`]
- [`Duration::as_micros`]
- [`Duration::as_nanos`]

Cargo
-----
- [Cargo should now rebuild a crate if a file was modified during the initial
  build.][cargo/6484]

Compatibility Notes
-------------------
- The methods `str::{trim_left, trim_right, trim_left_matches,
  trim_right_matches}` are now deprecated in the standard library, and their
  usage will now produce a warning.  Please use the `str::{trim_start,
  trim_end, trim_start_matches, trim_end_matches}` methods instead.
- The `Error::cause` method has been deprecated in favor of `Error::source`
  which supports downcasting.

[55982]: https://github.com/rust-lang/rust/pull/55982/
[56303]: https://github.com/rust-lang/rust/pull/56303/
[56351]: https://github.com/rust-lang/rust/pull/56351/
[56362]: https://github.com/rust-lang/rust/pull/56362
[56642]: https://github.com/rust-lang/rust/pull/56642/
[56769]: https://github.com/rust-lang/rust/pull/56769/
[56805]: https://github.com/rust-lang/rust/pull/56805
[56947]: https://github.com/rust-lang/rust/pull/56947/
[57049]: https://github.com/rust-lang/rust/pull/57049/
[57067]: https://github.com/rust-lang/rust/pull/57067/
[57105]: https://github.com/rust-lang/rust/pull/57105
[57130]: https://github.com/rust-lang/rust/pull/57130/
[57167]: https://github.com/rust-lang/rust/pull/57167/
[57175]: https://github.com/rust-lang/rust/pull/57175/
[57234]: https://github.com/rust-lang/rust/pull/57234/
[57332]: https://github.com/rust-lang/rust/pull/57332/
[57465]: https://github.com/rust-lang/rust/pull/57465/
[57532]: https://github.com/rust-lang/rust/pull/57532/
[57535]: https://github.com/rust-lang/rust/pull/57535/
[57566]: https://github.com/rust-lang/rust/pull/57566/
[57615]: https://github.com/rust-lang/rust/pull/57615/
[cargo/6484]: https://github.com/rust-lang/cargo/pull/6484/
[`unix::FileExt::read_exact_at`]: https://doc.rust-lang.org/std/os/unix/fs/trait.FileExt.html#method.read_exact_at
[`unix::FileExt::write_all_at`]: https://doc.rust-lang.org/std/os/unix/fs/trait.FileExt.html#method.write_all_at
[`Option::transpose`]: https://doc.rust-lang.org/std/option/enum.Option.html#method.transpose
[`Result::transpose`]: https://doc.rust-lang.org/std/result/enum.Result.html#method.transpose
[`convert::identity`]: https://doc.rust-lang.org/std/convert/fn.identity.html
[`pin::Pin`]: https://doc.rust-lang.org/std/pin/struct.Pin.html
[`marker::Unpin`]: https://doc.rust-lang.org/stable/std/marker/trait.Unpin.html
[`marker::PhantomPinned`]: https://doc.rust-lang.org/nightly/std/marker/struct.PhantomPinned.html
[`Vec::resize_with`]: https://doc.rust-lang.org/std/vec/struct.Vec.html#method.resize_with
[`VecDeque::resize_with`]: https://doc.rust-lang.org/std/collections/struct.VecDeque.html#method.resize_with
[`Duration::as_millis`]: https://doc.rust-lang.org/std/time/struct.Duration.html#method.as_millis
[`Duration::as_micros`]: https://doc.rust-lang.org/std/time/struct.Duration.html#method.as_micros
[`Duration::as_nanos`]: https://doc.rust-lang.org/std/time/struct.Duration.html#method.as_nanos
[platform-support]: https://forge.rust-lang.org/platform-support.html

(he)

Avoid unportable -static-libgcc. Fixes OS X clang build.

(schmonz)

Updated www/firefox-l10n to 65.0.2

(ryoon)

Update to 65.0.2

* Sync with/firefox-65.0.2

(ryoon)

Updated www/firefox to 65.0.2

(ryoon)

Update to 65.0.2

Changelog:
fixed: Fixed an issue with geolocation services affecting Windows users

(ryoon)

doc: note addition of editors/retext

(gutteridge)

editors/Makefile: add retext

(gutteridge)

editors/retext: initial import of version 7.0.4

ReText is a text editor for various markup languages (such as Markdown
and reStructuredText). It gives you the power to control all output
formatting. The files it works with are plain text files, however it
can export to PDF, HTML and other formats, and can display content in
WYSIWYG form.

(gutteridge)

Regen chesksum for the patch

(ryoon)

doc: Updated chat/unrealircd to 4.2.2

(nia)

unrealircd: Update to 4.2.2.

Changes between version 4.2.1 and 4.2.2:

Improvements:

    Quicker connection handshake for clients which use CAP and/or SASL.
    With "TOPIC #chan" and "MODE #chan +b" (and +e/+I) you can see who set the topic and bans/exempts/invex. The default is to only show the nick of the person who set the item. This can be changed (not the default) by setting:

    set { topic-setter nick-user-host; };
    set { ban-setter nick-user-host; };

    The 'set by' and 'set at' information for +beI lists are now synchronized when servers link. You still see the MODE originating from the server, however when the banlist is queried you will now be able to see the original nick and time of the bansetter rather than serv.er.name. If you want the OLD behavior you can use: set { ban-setter-sync no; };
    The default maximum topic length has been increased from 307 to 360.
    You can now set more custom limits. The default settings are shown below:

    set {
            topic-length 360; /* maximum: 360 */
            away-length 307; /* maximum: 360 */
            quit-length 307; /* maximum: 395 */
            kick-length 307; /* maximum: 360 */
        };

    The message sent to users upon *LINE can now be adjusted completely via set::reject-message::kline and set::reject-message::gline.
    New set::anti-flood::max-concurrent-conversations which configures the maximum number of conversations a user can have with other users at the same time.
    Until now this was hardcoded at limiting /MSG and /INVITE to 20 different users in a 15 second period. The new default is 10 users, which serves as a protection measure against spambots.
    New set::max-targets-per-command which configures the maximum number of targets accepted for a command, such as 4 to allow e.g. /MSG nick1,nick2,nick3,nick4 hi.
    Also changed the following defaults (previously hardcoded):
        PRIVMSG from 20 to 4 targets, to counter /amsg spam
        NOTICE from 20 to 1 target, to counter /anotice spam
        KICK from 1 to 4 targets, to make it easier for channel operators to quickly kick a large amount of spambots
    Added INVITE and KNOCK flood protection (command rate limiting):
        set::anti-flood::invite-flood now defaults to 4 per 60 seconds (previously the effective limit was 1 invite per 6 seconds).
        set::anti-flood::knock-flood now defaults to 4 per 120 seconds.
    New set::outdated-tls-policy which describes what to do with clients that use outdated SSL/TLS protocols (eg: TLSv1.0) and ciphers.
    The default settings are to warn in all cases: users connecting, opers /OPER'ing up and servers linking in. The user will see a message telling them to upgrade their IRC client.
    This should help with migrating such users, since in the future, say one or two years from now, we would want to change the default to only allow TSLv1.2+ with ciphers that provide Forward Secrecy. Instead of rejecting clients without any error message, this provides a way to warn them and give them some time to upgrade their outdated IRC client.

Major issues fixed:

    Crash issue in the 'websocket' module.

Minor issues fixed:

    The advertised "link-security" was incorrectly downgraded from level 2 to 1 if spkifp was used as an authentication method.
    In case of a crash, the ./unrealircd backtrace script was not working correctly in non-English environments, leading to less accurate bug reports.
    Various crashes if a server receives incorrect commands from a trusted linked server.
    A number of memory leaks on REHASH (about 1K).
    SASL was not working post-registration, eg: when services link back in. This is now fixed in UnrealIRCd, but may require a services update as well.

Changed:

    The noctcp user mode (+T) will now only block CTCP's and not CTCP REPLIES. Also, IRCOps can bypass user mode +T restrictions.
    The server will warn if your ulines { } are matching UnrealIRCd servers.
    The m_whox module now contains various features that m_who already had.
    Also, m_whox will try to convert classic UnrealIRCd WHO requests such as "WHO +i 127.0.0.1" to whox style "WHO 127.0.0.1 i".
    Unfortunately auto-converting WHO requests is not always possible. When in doubt the WHOX syntax is assumed. Users are thus (still) encouraged to use the whox style when m_whox is loaded.

For module coders:

    New hook HOOKTYPE_WELCOME (aClient *acptr, int after_numeric): allows you to send a message at very specific places during the initial welcome.
    New Isupport functions: IsupportSet, IsupportSetFmt and IsupportDelByName.
    The M_ANNOUNCE flag in the command add functions should no longer be used as CMDS= is removed. Please update your module.
    New "SJSBY" in PROTOCTL, which is used in SJOIN to sync extra data. See the last part of the SJOIN documentation.
    For a command with 2 arguments, eg "PRIVMSG #a :txt", parv[1] is "#a", parv[2] is "txt" and parv[3] is NULL. Any arguments beyond that, such as parv[4] should not be accessed. To help module coders with detecting such bugs we now poison unused parv[] elements that should never be accessed. Note that without this poison your code will also crash, now it just crashes more consistently.

IRC protocol:
This section is intended for client coders and people interested in IRC protocol technicalities

    Many changes in the tokens used in numeric 005 (RPL_ISUPPORT):
        Removed CMDS= because this was an unnecessary abstraction and it was not picked up by any other IRCd.
        The tokens KNOCK MAP USERIP have been added (moved from CMDS=..)
        STARTTLS is no longer advertised in 005 since doing so would be too late. Also, STARTTLS is not the preferred method of using SSL/TLS.
        Added TARGMAX= to communicate set::max-targets-per-command limits.
        Removed the MAXTARGETS= token because TARGMAX= replaces it.
        Added DEAF=d to signal what user mode is used for "deaf"
        Added QUITLEN to communicate the set::quit-length setting (after all, why communicate length for KICK but not for QUIT?)
        The 005 tokens are now sorted alphabetically
    When hitting the TARGMAX limit (set::max-targets-per-command), for example with "/MSG k001,k002,k003,k004,k005 hi", you will see:
    :server 407 me k005 :Too many targets. The maximum is 4 for PRIVMSG.
    When hitting the set::anti-flood::max-concurrent-conversations limit (so not per command, but per time frame), you will see:
    :server 439 me k011 :Message target change too fast. Please wait 7 seconds
    When hitting the set::anti-flood::invite-flood limit you will get:
    :server 263 me INVITE :Flooding detected. Please wait a while and try again.
    When hitting the set::anti-flood::knock-flood limit you will get:
    :server 480 me :Cannot knock on #channel (You are KNOCK flooding)
    Not a protocol change. But when a server returns from a netsplit and syncs modes such as: :server MODE #chan +b this!is@an.old.ban
    Then later on you can query the banlist (MODE #chan b) and you may see the actual original setter and timestamp of the ban. So if a user wishes to see the banlist then IRC clients are encouraged to actively query the banlist before displaying it. Fortunately most clients do this.
    If the set::topic-setter or set::ban-setter are set to nick-user-host then the "added by" field in numerics that show these entries will contain nick!user@host instead of nick, eg:
    :server 367 me #channel this!is@some.ban bansetter!user@some.host 1549461765

(nia)

Updated devel/libatomic_ops, devel/py-test-randomly

(adam)

py-test-randomly: updated to 2.1.0

2.1.0:
* Add the option --randomly-seed=last to reuse the last used value for the
  seed.

(adam)

libatomic_ops: updated to 7.6.10

7.6.10:
* Eliminate 'my_chunk_ptr-AO_initial_heap out of bounds' cppcheck warning
* Fix 'AO_*_TS_T is not defined' compiler warnings (GCC-8)
* Fix 'duplicate symbol' error for test_malloc/stack with static libs (OS X)
* Workaround 'argument to function assert is always 1' cppcheck warnings

(adam)

Updated devel/py-ddt, textproc/py-jsbeautifier

(adam)

py-jsbeautifier: updated to 1.9.0

v1.9.0:
Description
Fixed Tab indenting - when tabs indenting enabled, they are used universally. Also, tab size customizable: 8-space tabs would mean each tab is treated as 8 spaces.
Accurate line wrapping - Layout always wraps when line length exceed specified column, unless wrapping would not reduce line length.
Improved Template handling in HTML - Go, Django, Handlebars, ERB/EJS/ASP, PHP (still only handlebars indenting)
Improved Template handling in Javascript - ERB/EJS/ASP, PHP (no indenting, no Django or Handlebars due to potential syntax conflicts for curly braces)
Fixed indenting of mustache inverted conditionals
Fixed indenting for HTML tags with option end tags
https://github.com/beautify-web/js-beautify/compare/v1.8.9...v1.9.0

Closed Issues
Incorrect indentation of ^ inverted section tags in Handlebars/Mustache code
PHP In HTML Attributes
DeanEdward python unpacker offset problem
CLI on Windows doesn't accept -f - for stdin?
HTML type attribute breaks JavaScript beautification?
Use of global MODE before declaration caused uglify problem
When building html tags using Mustache variables, extra whitespace is added after opening arrow
<script type="text/html">isnot abled to be beautified
_get_full_indent undefined
Website "autodetect" setting doesn't distinguish css vs javascript
Add setting to keep HTML tag text content unformatted or ignore custom delimiters
HTML auto formatting using spaces instead of tabs
Unclosed single quote in php tag causes formatting changes which break php code
Using tabs when wrapping attributes and wrapping if needed
HTML --wrap-attributes doesn't respect --wrap-line-length
Bad indent level(HTML)
js-beautify produces invalid code for variables with Unicode escape sequences
support vuejs
Go templates in HTML
Better behavior for javascript --wrap-line-length

(adam)

py-ddt: updated to 1.2.1

1.2.1:
Merge pull request 68 from datadriventests/fix-docstring-behavior

(adam)

Updated textproc/p5-Text-Template to 1.55

(wen)

Update to 1.55

Upstream changes:
Changes for version 1.55 - 2019-02-25

    Improve AppVeyor tests for older Perls (Thanks Roy Ivy)
    Check for Test::More 0.94 and skip tests if not installed where done_testing() is used (Thanks Roy Ivy).
    Improve workaround for broken Win32 File::Temp taint failure (Thanks Roy Ivy).
    Skip/todo tests which fail under Devel::Cover (Thanks Roy Ivy)
    Add checks and skip_all checks for non-core test modules (Thanks Roy Ivy)

(wen)

Updated devel/py-hypothesis, textproc/py-jsonschema; Added devel/py-pyrsistent

(adam)

py-jsonschema: updated to 3.0.1

v3.0.0
* Support for Draft 6 and Draft 7
* Draft 7 is now the default
* New TypeChecker object for more complex type definitions (and overrides)
* Falling back to isodate for the date-time format checker is no longer
  attempted, in accordance with the specification

(adam)

Updated www/wordpress to 5.1

(wen)

Update to 5.1

Upstream changelog please visit:
https://wordpress.org/news/2019/02/betty/

(wen)

py-pyrsistent: added version 0.14.11

Pyrsistent is a number of persistent collections (by some referred to as
functional data structures). Persistent in the sense that they are immutable.

All methods on a data structure that would normally mutate it instead return a
new copy of the structure containing the requested updates. The original
structure is left untouched.

This will simplify the reasoning about what a program does since no hidden side
effects ever can take place to these data structures. You can rest assured that
the object you hold a reference to will remain the same throughout its lifetime
and need not worry that somewhere five stack levels below you in the darkest
corner of your application someone has decided to remove that element that you
expected to be there.

Pyrsistent is influenced by persistent data structures such as those found in
the standard library of Clojure. The data structures are designed to share
common elements through path copying. It aims at taking these concepts and make
them as pythonic as possible so that they can be easily integrated into any
python program without hassle.

(adam)

py-hypothesis: updated to 4.7.17

4.7.17:
This release makes some micro-optimisations within Hypothesis's internal representation of test cases. This should cause heavily nested test cases to allocate less during generation and shrinking, which should speed things up slightly.

4.7.16:
This changes the order in which Hypothesis runs certain operations during shrinking. This should significantly decrease memory usage and speed up shrinking of large examples.

4.7.15:
This release allows Hypothesis to calculate a number of attributes of generated test cases lazily. This should significantly reduce memory usage and modestly improve performance, especially for large test cases.

4.7.14:
This release reduces the number of operations the shrinker will try when reordering parts of a test case. This should in some circumstances significantly speed up shrinking. It may result in different final test cases, and if so usually slightly worse ones, but it should not generally have much impact on the end result as the operations removed were typically useless.

4.7.13:
This release changes how Hypothesis reorders examples within a test case during shrinking. This should make shrinking considerably faster.

4.7.12:
This release slightly improves the shrinker's ability to replace parts of a test case with their minimal version, by allowing it to do so in bulk rather than one at a time. Where this is effective, shrinker performance should be modestly improved.

4.7.11:
This release makes some micro-optimisations to common operations performed during shrinking. Shrinking should now be slightly faster, especially for large examples with relatively fast test functions.

4.7.10:
This release is a purely internal refactoring of Hypothesis's API for representing test cases. There should be no user visible effect.

4.7.9:
This release changes certain shrink passes to make them more efficient when they aren't making progress.

4.7.8:
This patch removes some unused code, which makes the internals a bit easier to understand. There is no user-visible impact.

4.7.7:
This release reduces the number of operations the shrinker will try when reordering parts of a test case. This should in some circumstances significantly speed up shrinking. It may result in different final test cases, and if so usually slightly worse ones, but it should not generally have much impact on the end result as the operations removed were typically useless.

4.7.6:
This patch removes some unused code from the shrinker. There is no user-visible change.

4.7.5:
This release changes certain shrink passes to make them adaptive - that is, in cases where they are successfully making progress they may now do so significantly faster.

4.7.4:
This is a docs-only patch, noting that because the :pypi:lark-parser is under active development at version 0.x, hypothesis[lark] APIs may break in minor releases if necessary to keep up with the upstream package.

4.7.3:
This changes Hypothesis to no longer import various test frameworks by default (if they are installed). which will speed up the initial import hypothesis call.

4.7.2:
This release changes Hypothesis's internal representation of a test case to calculate some expensive structural information on demand rather than eagerly. This should reduce memory usage a fair bit, and may make generation somewhat faster.

4.7.1:
This release refactors the internal representation of previously run test cases. The main thing you should see as a result is that Hypothesis becomes somewhat less memory hungry.

4.7.0:
This patch allows :func:~hypothesis.extra.numpy.array_shapes to generate shapes with side-length or even dimension zero, though the minimum still defaults to one. These shapes are rare and have some odd behavior, but are particularly important to test for just that reason!

In a related bigfix, :func:~hypothesis.extra.numpy.arrays now supports generating zero-dimensional arrays with dtype=object and a strategy for iterable elements. Previously, the array element would incorrectly be set to the first item in the generated iterable.

(adam)