Add HOMEPAGE, set LICENSE.

(wiz)

Add a couple new tex packages.

(wiz)

Added print/tex-schulschriften-doc version 4

(wiz)

Import tex-schulschriften-doc-4 as print/tex-schulschriften-doc.

Documentation for tex-schulschriften.

(wiz)

Added print/tex-schulschriften version 4

(wiz)

Import tex-schulschriften-4 as print/tex-schulschriften.

This package contains the METAFONT-Sources for the following German
school basic writing styles taught in schools: Suetterlinschrift,
Deutsche Normalschrift, Lateinische Ausgangsschrift, Schulausgangsschrift,
Vereinfachte Ausgangsschrift. Thus you can write arbitrary German
texts in these fonts.

(wiz)

Githubify. No change on built binary.

(mef)

Comment out dependency on p5-AnyEvent-AIO to avoid dependency cycle.

(joerg)

Added print/tex-xskak-doc version 1.4

(wiz)

Import tex-xskak-doc-1.4 as print/tex-xskak-doc.

Documentation for tex-xskak.

(wiz)

Added print/tex-xskak version 1.4

(wiz)

Import tex-xskak-1.4 as print/tex-xskak.

Xskak, as its prime function, saves information about a chess
game for later use (e.g., to loop through a game to make an
animated board). The package also extends the input that the
parsing commands can handle and offers an interface to define
and switch between indefinite levels of styles.

(wiz)

Added print/tex-schwalbe-chess-doc version 2.0

(wiz)

Import tex-schwalbe-chess-doc-2.0 as print/tex-schwalbe-chess-doc.

Documentation for tex-schwalbe-chess.

(wiz)

Added print/tex-schwalbe-chess version 2.0

(wiz)

Import tex-schwalbe-chess-2.0 as print/tex-schwalbe-chess.

The package is based on chess-problem-diagrams, which in its
turn has a dependency on the bartel-chess-fonts

(wiz)

Add dependency on the font used.

(wiz)

Added print/tex-chessboard-doc version 1.7

(wiz)

Import tex-chessboard-doc-1.7 as print/tex-chessboard-doc.

Documentation for tex-chessboard.

(wiz)

Added print/tex-chessboard version 1.7

(wiz)

Import tex-chessboard-1.7 as print/tex-chessboard.

This package offers commands to print chessboards. It can print
partial boards, hide pieces and fields, color the boards and
put various marks on the board. It has a lot of options to
place pieces on the board. Using exotic pieces (e.g., for fairy
chess) is possible. The documentation includes an example of an
animated chessboard, for those whose PDF viewer can display
animations.

(wiz)

Added print/tex-chess-problem-diagrams-doc version 1.11.1

(wiz)

Import tex-chess-problem-diagrams-doc-1.11.1 as print/tex-chess-problem-diagrams-doc.

Documentation for tex-chess-problem-diagrams.

(wiz)

Added print/tex-chess-problem-diagrams version 1.11.1

(wiz)

Import tex-chess-problem-diagrams-1.11.1 as print/tex-chess-problem-diagrams.

This package provides macros to typeset chess problem diagrams
including fairy chess problems (mostly using rotated images of
pieces) and other boards.

(wiz)

Added print/tex-chess-doc version 1.2

(wiz)

Import tex-chess-doc-1.2 as print/tex-chess-doc.

Documentation for tex-chess.

(wiz)

Added print/tex-chess version 1.2

(wiz)

Import tex-chess-1.2 as print/tex-chess.

The original (and now somewhat dated) TeX chess font package.
Potential users should consider skak (for alternative fonts,
and notation support), texmate (for alternative notation
support), or chessfss (for flexible font choices).

(wiz)

+ tex-bartel-chess-fonts*

(wiz)

Set LICENSE.

(wiz)

Added fonts/tex-bartel-chess-fonts-doc version 2014

(wiz)

Added fonts/tex-bartel-chess-fonts version 2014

(wiz)

Import tex-bartel-chess-fonts-doc-2014 as fonts/tex-bartel-chess-fonts-doc.

Documentation for tex-bartel-chess-fonts.

(wiz)

Import tex-bartel-chess-fonts-2014 as fonts/tex-bartel-chess-fonts.

The fonts are provided as Metafont source.

(wiz)

+ tex-knuth-doc.

(wiz)

Added print/tex-knuth-doc version 2014

(wiz)

Import tex-knuth-doc-2014 as print/tex-knuth-doc.

These files record details of problems reported in the "Computers
and Typesetting" series of books, for the Computer Modern fonts,
and for TeX, METAFONT and related programs.

(wiz)

Updated security/p5-IO-Socket-SSL to 2.014

(wiz)

Update to 2.014:

2.014 2015/05/05
- Utils::CERT_create - work around problems with authorityInfoAccess, where
  OpenSSL i2v does not create the same string as v2i expects
- Intercept - don't clone some specific extensions which make only sense with
  the original certificate

(wiz)

Updated textproc/p5-XML-LibXML to 2.0121

(wiz)

Update to 2.0121:

2.0121  2015-05-03
    - Mention CVE-2015-3451 and related links in the Changes (= this file)
    entry for 2.0119.
        - Thanks to Tilmann Haak for pointing it out.

(wiz)

Updated mail/p5-MIME-tools to 5.506

(wiz)

Update to 5.506:

5.506   2015-04-22  Dianne Skoll <dfs@roaringpenguin.com>

* VERSION 5.506 RELEASED

* Update maintainer's name to "Dianne Skoll"

(wiz)

Remove p5-Test-Tester, replaced by p5-Test-Simple.

(wiz)

Updated www/p5-Test-WWW-Declare to 0.02nb6

(wiz)

Switch from p5-Test-Tester to p5-Test-Simple.
Depend on p5-CGI since it'll be removed from perl core soon.
Set LICENSE.
Bump PKGREVISION.

(wiz)

Updated devel/p5-Test-Output to 1.03nb3

(wiz)

Switch from p5-Test-Tester to p5-Test-Simple.
Bump PKGREVISION.

(wiz)

- Remove duplicate DEPENDS (BUILD_DEPENDS+=  tex-lastpage-[0-9]*), thanks wiz@
- Add TEST_ENV+=    BIBTEX_TESTS=yes

(mef)

Updated net/dnsmasq to 2.72

(mef)

Update 2.67 to 2.72
-------------------
version 2.72
            Add ra-advrouter mode, for RFC-3775 mobile IPv6 support.

    Add support for "ipsets" in *BSD, using pf. Thanks to
    Sven Falempim for the patch.

    Fix race condition which could lock up dnsmasq when an
    interface goes down and up rapidly. Thanks to Conrad
    Kostecki for helping to chase this down.

    Add DBus methods SetFilterWin2KOption and SetBogusPrivOption
    Thanks to the Smoothwall project for the patch.

    Fix failure to build against Nettle-3.0. Thanks to Steven
    Barth for spotting this and finding the fix.

    When assigning existing DHCP leases to intefaces by comparing
    networks, handle the case that two or more interfaces have the
    same network part, but different prefix lengths (favour the
    longer prefix length.) Thanks to Lung-Pin Chang for the
    patch.

    Add a mode which detects and removes DNS forwarding loops, ie
    a query sent to an upstream server returns as a new query to
    dnsmasq, and would therefore be forwarded again, resulting in
    a query which loops many times before being dropped. Upstream
    servers which loop back are disabled and this event is logged.
    Thanks to Smoothwall for their sponsorship of this feature.

    Extend --conf-dir to allow filtering of files. So
    --conf-dir=/etc/dnsmasq.d,\*.conf
    will load all the files in /etc/dnsmasq.d which end in .conf

            Fix bug when resulted in NXDOMAIN answers instead of NODATA in
            some circumstances.

    Fix bug which caused dnsmasq to become unresponsive if it
    failed to send packets due to a network interface disappearing.
    Thanks to Niels Peen for spotting this.

            Fix problem with --local-service option on big-endian platforms
    Thanks to Richard Genoud for the patch.

version 2.71
            Subtle change to error handling to help DNSSEC validation
    when servers fail to provide NODATA answers for
    non-existent DS records.

    Tweak code which removes DNSSEC records from answers when
    not required. Fixes broken answers when additional section
    has real records in it. Thanks to Marco Davids for the bug
    report.

    Fix DNSSEC validation of ANY queries. Thanks to Marco Davids
    for spotting that too.

    Fix total DNS failure and 100% CPU use if cachesize set to zero,
    regression introduced in 2.69. Thanks to James Hunt and
    the Ubuntu crowd for assistance in fixing this.

version 2.70
            Fix crash, introduced in 2.69, on TCP request when dnsmasq
    compiled with DNSSEC support, but running without DNSSEC
    enabled. Thanks to Manish Sing for spotting that one.

    Fix regression which broke ipset functionality. Thanks to
    Wang Jian for the bug report.

version 2.69
    Implement dynamic interface discovery on *BSD. This allows
    the contructor: syntax to be used in dhcp-range for DHCPv6
    on the BSD platform. Thanks to Matthias Andree for
    valuable research on how to implement this.

    Fix infinite loop associated with some --bogus-nxdomain
    configs. Thanks fogobogo for the bug report.

    Fix missing RA RDNS option with configuration like
    --dhcp-option=option6:23,[::] Thanks to Tsachi Kimeldorfer
    for spotting the problem.

    Add [fd00::] and [fe80::] as special addresses in DHCPv6
    options, analogous to [::]. [fd00::] is replaced with the
    actual ULA of the interface on the machine running
    dnsmasq, [fe80::] with the link-local address.
    Thanks to Tsachi Kimeldorfer for championing this.

    DNSSEC validation and caching. Dnsmasq needs to be
    compiled with this enabled, with

    make dnsmasq COPTS=-DHAVE_DNSSEC

    this add dependencies on the nettle crypto library and the
    gmp maths library. It's possible to have these linked
    statically with

    make dnsmasq COPTS='-DHAVE_DNSSEC -DHAVE_DNSSEC_STATIC'

    which bloats the dnsmasq binary, but saves the size of
    the shared libraries which are much bigger.

    To enable, DNSSEC, you will need a set of
    trust-anchors. Now that the TLDs are signed, this can be
    the keys for the root zone, and for convenience they are
    included in trust-anchors.conf in the dnsmasq
    distribution. You should of course check that these are
    legitimate and up-to-date. So, adding

    conf-file=/path/to/trust-anchors.conf
    dnssec

    to your config is all thats needed to get things
    working. The upstream nameservers have to be DNSSEC-capable
    too, of course. Many ISP nameservers aren't, but the
    Google public nameservers (8.8.8.8 and 8.8.4.4) are.
    When DNSSEC is configured, dnsmasq validates any queries
    for domains which are signed. Query results which are
    bogus are replaced with SERVFAIL replies, and results
    which are correctly signed have the AD bit set. In
    addition, and just as importantly, dnsmasq supplies
    correct DNSSEC information to clients which are doing
    their own validation, and caches DNSKEY, DS and RRSIG
    records, which significantly improve the performance of
    downstream validators. Setting --log-queries will show
    DNSSEC in action.

    If a domain is returned from an upstream nameserver without
    DNSSEC signature, dnsmasq by default trusts this. This
    means that for unsigned zone (still the majority) there
    is effectively no cost for having DNSSEC enabled. Of course
    this allows an attacker to replace a signed record with a
    false unsigned record. This is addressed by the
    --dnssec-check-unsigned flag, which instructs dnsmasq
    to prove that an unsigned record is legitimate, by finding
    a secure proof that the zone containing the record is not
    signed. Doing this has costs (typically one or two extra
    upstream queries). It also has a nasty failure mode if
    dnsmasq's upstream nameservers are not DNSSEC capable.
    Without --dnssec-check-unsigned using such an upstream
    server will simply result in not queries being validated;
    with --dnssec-check-unsigned enabled and a
    DNSSEC-ignorant upstream server, _all_ queries will fail.

    Note that DNSSEC requires that the local time is valid and
    accurate, if not then DNSSEC validation will fail. NTP
    should be running. This presents a problem for routers
    without a battery-backed clock. To set the time needs NTP
    to do DNS lookups, but lookups will fail until NTP has run.
    To address this, there's a flag, --dnssec-no-timecheck
    which disables the time checks (only) in DNSSEC. When dnsmasq
    is started and the clock is not synced, this flag should
    be used. As soon as the clock is synced, SIGHUP dnsmasq.
    The SIGHUP clears the cache of partially-validated data and
    resets the no-timecheck flag, so that all DNSSEC checks
    henceforward will be complete.

    The development of DNSSEC in dnsmasq was started by
    Giovanni Bajo, to whom huge thanks are owed. It has been
    supported by Comcast, whose techfund grant has allowed for
    an invaluable period of full-time work to get it to
    a workable state.

    Add --rev-server. Thanks to Dave Taht for suggesting this.

    Add --servers-file. Allows dynamic update of upstream servers
    full access to configuration.

    Add --local-service. Accept DNS queries only from hosts
            whose address is on a local subnet, ie a subnet for which
            an interface exists on the server. This option
            only has effect if there are no --interface --except-interface,
            --listen-address or --auth-server options. It is intended
            to be set as a default on installation, to allow
            unconfigured installations to be useful but also safe from
    being used for DNS amplification attacks.

    Fix crashes in cache_get_cname_target() when dangling CNAMEs
    encountered. Thanks to Andy and the rt-n56u project for
    find this and helping to chase it down.

    Fix wrong RCODE in authoritative DNS replies to PTR queries. The
    correct answer was included, but the RCODE was set to NXDOMAIN.
    Thanks to Craig McQueen for spotting this.

    Make statistics available as DNS queries in the .bind TLD as
    well as logging them.

version 2.68
            Use random addresses for DHCPv6 temporary address
            allocations, instead of algorithmically determined stable
            addresses.

    Fix bug which meant that the DHCPv6 DUID was not available
    in DHCP script runs during the lifetime of the dnsmasq
    process which created the DUID de-novo. Once the DUID was
    created and stored in the lease file and dnsmasq
    restarted, this bug disappeared.

    Fix bug introduced in 2.67 which could result in erroneous
    NXDOMAIN returns to CNAME queries.

    Fix build failures on MacOS X and openBSD.

    Allow subnet specifications in --auth-zone to be interface
    names as well as address literals. This makes it possible
    to configure authoritative DNS when local address ranges
    are dynamic and works much better than the previous
    work-around which exempted contructed DHCP ranges from the
    IP address filtering. As a consequence, that work-around
    is removed. Under certain circumstances, this change wil
    break existing configuration: if you're relying on the
    contructed-range exception, you need to change --auth-zone
    to specify the same interface as is used to construct your
    DHCP ranges, probably with a trailing "/6" like this:
    --auth-zone=example.com,eth0/6 to limit the addresses to
    IPv6 addresses of eth0.

    Fix problems when advertising deleted IPv6 prefixes. If
    the prefix is deleted (rather than replaced), it doesn't
    get advertised with zero preferred time. Thanks to Tsachi
    for the bug report.

    Fix segfault with some locally configured CNAMEs. Thanks
    to Andrew Childs for spotting the problem.

    Fix memory leak on re-reading /etc/hosts and friends,
    introduced in 2.67.

    Check the arrival interface of incoming DNS and TFTP
    requests via IPv6, even in --bind-interfaces mode. This
    isn't possible for IPv4 and can generate scary warnings,
    but as it's always possible for IPv6 (the API always
    exists) then we should do it always.

    Tweak the rules on prefix-lengths in --dhcp-range for
    IPv6. The new rule is that the specified prefix length
    must be larger than or equal to the prefix length of the
    corresponding address on the local interface.

(mef)

Updated textproc/p5-Lingua-EN-Inflect to 1.897
Updated textproc/p5-Text-MicroTemplate to 0.23
Updated textproc/p5-Template-Plugin-Latex to 3.06

(mef)

Update 3.02 to 3.06
-------------------
# Version 3.06
# -----------------------------------------------------------------------
* Makefile now generates without user input
* Test cases should now run on all smoketesters.

# Version 3.03 to 03.05
#------------------------------------------------------------------------
* Minor packaging fixes which correct issues relating to CPAN indexing as
  a co-committer.  No code changes.

# Version 3.02.01 - 2014-02-25
#------------------------------------------------------------------------
* Fixed test case failures based on differing escape returns from
  LaTeX::Encode

(mef)

Update 0.20 to 0.23
-------------------
0.23
  - fix test error on Windows due to the use of
    unescaped paths in regex patterns (by nanis) #11 #13
0.22
  - fix regression in 0.21 (use of here-doc within `<?= ?>` causes syntax error) #12
  - add support for `prepend` property for prepending code (by LoonyPandora) #3

0.21
- fix the strange rule for multi-line expression #10

(mef)

Update 1.895 to 1.897
----------------------
1.897  Tue May  5 16:10:54 2015
    - Noted "print NUMWORDS($num)" gotcha in documentation (thanks Lady Aleena)
    - Fixed undef var bug in t/no_commas.t
      (thanks Matthew!)
    - Fixed words-below tests on things that aren't really numbers
    - Removed unneeded dependency on version
    - Doc nit knitted (thank-you Lady Aleena)
    - Added a pointer to Lingua::EN::Inflexion

(mef)

Updated devel/p5-File-Which to 1.18
Updated devel/p5-FileHandle-Unget to 0.1628
Updated devel/p5-PerlIO-utf8_strict to 0.006
Updated devel/p5-Sort-Versions to 1.61

(mef)

Update to 1.61
--------------
1.61 2015-04-29 NEILB
    - Removed spaces from function prototype for versioncmp(). RT#103810
      Kerin Millar++
    - Added [MetaJSON] so the dist will get a META.json file

(mef)

(pkgsrc)
- set PERL5_MODULE_TYPE to default, removing line (see below)
(upstream)
- update to 0.006
0.006    2015-05-01 11:36:21+02:00 Europe/Amsterdam
          Move to MakeMaker

(mef)

Update to 1.16
--------------
1.16 Sat 2 May 2015
  - add missing test prereq on autodie

(mef)

Update to 0.1628
----------------
Version 0.1628: Sat May 2 2015
- Prevent CPAN from indexing private-lib

(mef)

Update 1.16 to 1.18
-------------------
1.18      2015-05-04 15:35:40 -0400
  - Remove prototypes (gh#6)

1.17      2015-05-01 07:06:00 -0400
  - Removed pwhich as forwarned in 1.10
  - Migrated to Dist::Zilla (relevant only for development)
  - Minimum supported Perl is 5.8.1

(mef)

Updated devel/p5-AnyEvent to 7.09
Updated devel/p5-App-cpanminus to 1.7033
Updated devel/p5-Devel-CheckBin to 0.03

(mef)

(pkgsrc)
- set PERL5_MODULE_TYPE to default, remove the line
(upstream)
- update to 0.03
0.03 2015-04-30T00:47:41Z
    - re-packaging with EU::MM

(mef)

Update 1.7031 to 1.7033
-----------------------
1.7033  2015-05-01 17:17:42 PDT
  [Improvements]

- Remove MakeMaker and Module::Build from cpanm's runtime
  dependencies. Rather it will upgrade the minimum version requirement as
  it finds distributions that uses them in configure requirements. Also,
  they will be installed with 'notest' option for now, since Module::Build
  test suite takes a bit too long time.

1.7032  2015-04-29 18:51:36 PDT
  [Improvements]

  - Prefer to use cpanmetadb's package history API for pinning
    versions. Note that it only works against versions since April 2012. You
    can set `--metacpan` to still prefer MetaCPAN API search, and can use
    `--cascade-search` to fallback to MetaCPAN after CPAN MetaDB as well.

(mef)

(pkgsrc)
- Add two each of BUILD_DEPENDS and TEST_ENV
(upstream)
- update to 7.09
--------------
7.09 Sat May  2 16:38:53 CEST 2015
        - AnyEvent::Debug called an internal function (AnyEvent::Log::ft)
          that was renamed to AnyEvent::Log:format_time. uinder its old name
          (analyzed by Michael Stovenour).
        - update AnyEvent::DNS fallback resolver addresses:
          seems google effectively killed most other free dns resolvers,
          so remove them, but add cable and wireless (ecrc) since it was
          stable for 20 years or so, official or not, and there should be
          an alternative to google.
        - perl5porters broke windows error codes in 5.20, and mapped
          WSAEWOULDBLOCK on the (different) EWOULDBLOCK error code, and
          WSAEINPROGRESS into the incompatible ERINPROGRESS code, probably
          because they were so cool. They probably broke other error codes
          for no reason, too, but I didn't care for checking, it's too
          depressing. This version only works around the WSAEWOULDBLOCK
          issue, because I don't have a nice way to work around the
          WSAEINPROGRESS bug.

(mef)

Remove obsolete patches.

(wiz)

Updated devel/nss to 3.19

(ryoon)

Update to 3.19

Changelog:
The NSS team has released Network Security Services (NSS) 3.19,
which is a minor release.

New functionality:
* For some certificates, such as root CA certificates, that don't
  embed any constraints, NSS might impose additional constraints,
  such as name constraints. A new API has been added that allows
  to lookup imposed constraints.
* It is possible to override the directory in which the NSS build
  system will look for the sqlite library.

New Functions:
* CERT_GetImposedNameConstraints

Notable Changes:
* The SSL 3 protocol has been disabled by default.
* NSS now more strictly validates TLS extensions and will fail a
  handshake that contains malformed extensions.
* Fixed a bug related to the ordering of TLS handshake messages.
* In TLS 1.2 handshakes, NSS advertises support for the SHA512
  hash algorithm, in order to be compatible with TLS servers
  that use certificates with a SHA512 signature.

(ryoon)

Remove incorrect comment (0.6 is right, 0.5 in tlpobj is wrong).

(wiz)

Updated print/teTeX3-texmf to 3.0nb50

(wiz)

More files in separate packages. Bump PKGREVISION.

(wiz)

Updated print/tex-misc to 2012nb1

(wiz)

Remove a few files that are now installed by tex-omega.
(This whole package is gone in texlive-2014, so probably the others
need to go too.)
Bump PKGREVISION.

(wiz)

Updated print/tex-collection-basic to 2014nb1

(wiz)

Finish update to 2014. Bump PKGREVISION.

(wiz)

Updated print/tex-xdvi to 22.87

(wiz)

Update to 22.87:
22.87  Added support for high-resolution scrolling using touchpads.

(wiz)

Updated print/tex-texlive-en-doc to 2014

(wiz)

Update to 2014, changes not found.

(wiz)

Updated print/tex-texlive-docindex-doc to 2014

(wiz)

Update to 2014, changes not found.

(wiz)

Updated print/tex-texlive-docindex to 2014

(wiz)

Bump to 2014, changes not found.

(wiz)

Updated print/tex-texlive-common-doc to 2014 [wiz 2015-05-05]

(wiz)

Update to 2014: one more file installed.

(wiz)

Set HOMEPAGE.

(wiz)

Set HOMEPAGE.

(wiz)

Set HOMEPAGE, LICENSE.

(wiz)

Add HOMEPAGE, LICENSE.

(wiz)

Add HOMEPAGE.

(wiz)

Set HOMEPAGE and LICENSE.
XXX: version should be 2.0 instead of 2014.

(wiz)

Set HOMEPAGE and LICENSE.
XXX: versin number should be 2.0 instead of 2014

(wiz)

Set HOMEPAGE.
XXX: version number is wrong, should be 2.7182818, not 2014.

(wiz)

Add HOMEPAGE.

(wiz)

Add HOMEPAGE.

(wiz)

Standardize description.

(wiz)

Add HOMEPAGE.

(wiz)

Add HOMEPAGE.

(wiz)

Update HOMEPAGE.

(wiz)

Set HOMEPAGE.

(wiz)

Add HOMEPAGE.

(wiz)

Update HOMEPAGE, set LICENSE.
XXX: this should be version 0.5 instead of 0.6

(wiz)

Update HOMEPAGE, set LICENSE.
XXX: this should be version 0.5 instead of 0.6

(wiz)

Set HOMEPAGE and LICENSE.

(wiz)

Set HOMEPAGE and LICENSE.

(wiz)

Set HOMEPAGE.

(wiz)

Set HOMEPAGE.

(wiz)

Set HOMEPAGE.

(wiz)

Use description from texlive 2014.

(wiz)

Set HOMEPAGE.

(wiz)

Set HOMEPAGE.

(wiz)

Add FOO-jps to PLIST, missed in last commit

(abs)

Set HOMEPAGE.

(wiz)

Use description from texlive 2014.

(wiz)

Add HOMEPAGE, LICENSE.

(wiz)

Add HOMEPAGE, LICENSE.

(wiz)

Use description from texlive 2014.

(wiz)