TURBOchannel usb/gpio driver from Felix Deichmann

(christos)

TURBOchannel usb/gpio driver from Felix Deichmann

(christos)

first merge of xorg-server 1.18.4 reach over.  not tested, and
missing at these new subdirs, some which may not be needed:

dri2
glamor
hw/xfree86/drivers/modesetting
hw/xfree86/parser
present
pseudoramiX

(mrg)

Add some VLAN related acronyms.

(ginsbach)

Enable DMA transfer.

(nonaka)

Document the version echo first appeared.
Bump date.

(sevan)

Fix incorrect sector counts with MMC.

(nonaka)

Document the version dd first appeared.
Bump date.

(sevan)

Pp not required before Bd, picked up by mandoc lint

(sevan)

The macro to cross-reference is Xr, not Xt.
Fix typo error picked up by mandoc lint.

(sevan)

Document the version date first appeared.
Bump date.

(sevan)

Document the version cp first appeared.
Bump date.

(sevan)

Document the version chmod first appeared.
Bump date.

(sevan)

first merge of netbsd changes.  not tested yet.

(mrg)

Document the first version chio appeared in.
Bump date.

(sevan)

Mark Jason's name with An macro in AUTHORS section, warned about missing macro
by mandoc lint.

(sevan)

Set .ERROR_CMD if we can

(sjg)

+ -lrumpdev

(kre)

Bump date
Reminded by wiz@

(sevan)

+ -lrumpdev

(kre)

+ -lrumpdev

(kre)

+ -lrumpdev

(kre)

+ -lrumpdev

(kre)

Add -lrumpdev so that tests work again.

(roy)

+ -lrumpdev

(kre)

Move -lrumpdev so it is effective.

This test still fails (as does another using tap interfaces) ...

tc-se:rump.ifconfig: clone_command: Device not configured
tc-se:rump.ifconfig: exec_matches: Device not configured

Something is wrong with rumpnet_tap ...

(kre)

+ -lrumpdev (and avoid doing stuff twice).

(kre)

+ -lrumpdev

(kre)

+ -lrumpdev

(kre)

+ -lrumpdev

(kre)

Earliest reference in the TUHS archive is v3
Unfortunately only the source code for the compiler is present for that
release. The v2 archive is missing the manuals & only contains a some of the
commands.
Switch to v3 and reference manual category eight, as per r1.32 of
src/bin/ps/ps.1 from OpenBSD.
Heads up from Ingo Schwarze.

(sevan)

+ -lrumpdev

(kre)

Extra libs for rump.

(kre)

df was there from v1.
Confirmed from the TUHS & cat-v.org hosted copies of man pages.

(sevan)

Use Lst_FindFrom and Lst_Succ(ln) to find next entry in missingFiles.

(sjg)

Document the version ps first appeared.

(sevan)

Grammar

(sevan)

Linux filemon only records D some/dir for rm -rf
rather than D entries for each file removed.
Thus we need a loop to remove all matching missingFiles entries

(sjg)

Forgot to bump date with previous commit

(sevan)

Document the version mv first appeared.

(sevan)

Document the version mkdir first appeared.

(sevan)

ls was there from v1.
Confirmed from the TUHS & cat-v.org hosted copies of man pages

(sevan)

ln was there from v1.
Confirmed from the TUHS & cat-v.org hosted copies of man pages

(sevan)

C Shell appeared in 2BSD, not 3BSD

(sevan)

We need to save the GP of the caller in the context for n32/n64

(skrll)

Fix comments

(skrll)

On the first day (that being the eighth day of the eighth month,) the
building was completed only to discover that within there lay havoc.

On the second day all just groaned and moaned, and it must be someone
else's problen.

On the third day, St. Martin stepped in and traced the culprit, which
provided inspiration, and a correction was made.

Forevermore all were agog at just how such a trivial thing could do
so much damage...

OK...  to be a little less vague.  The loopback interface is a truly
"special" thing, and rump knew that - and treated it very specially.
Unfortunately, when the loopback interface is changed, and rump does
not keep up, bad things happen.

This (overall) might, or might not, be the correct fix - but for now
it appears to work.  If someone, sometime, finds a better way to
deal with the issues of the loopback interfaces true majesty, feel
free to revert this and do it another way.

(kre)

Add rumpdev library for config_cfdriver_attach

(ozaki-r)

Add rumpdev library for config_cfdriver_attach

(ozaki-r)

follow renaming ifmpls to mpls.

This fixes i386 ALL build.

(knakahara)

restructure wm(4) evcnt to support multiqueue evcnt.

ok by msaitou@n.o.

(knakahara)

Use 1.65-1.95 voltage window for 1.8V support.

(nonaka)

Undo revert now Christos has added the missing glue...

(kre)

merge missing function.

(christos)

Revert previous.  This work isn't complete enough to include yet,
and the build of current really does need to go back to a working state.

(kre)

Sign extended uarea va appropriately for mips_dcache_inv_range

(skrll)

Rename some functions so any atomic ops from this file and/or <sys/atomic.h> can be used.  May want to pare overlap in the future, but let's leave both options for now

(scole)

Revert previous - which itself (incorrectly) reverted the previous
changes, breaking the build.

(kre)

The only error that can occur from munlock() on NetBSD is ENOMEM.
Make it be that way.

(kre)

This test should be testing how the kernel should behave, not how
it actually (used to) behave when it was incorrect...  Aside from
a possible EPERM (which is not tested) the only error possible from
mlock() is ENOMEM.  POSIX also allows EINVAL if the address is not
page aligned and the implementation does not round down to the previous
page boundary, but NetBSD does.

The kernel was recently fixed to return the correct errors for mlock()
so now we really need the test to be checking them, and not expecting
the incorrect errno values that the kernel used to return.

Same for munlock() - there ENOMEM is the only possible error, again,
EINVAL cannot happen as the kernel rounds to page boundaries.
For munlock() the kernel has not yet been corrected (that is coming
real soon...) and one of the munlock() tests will currently fail
(as of the time this commit is made, hopefully not for much longer)
as it should - it is indicating a kernel bug.

Note that NetBSD mlock(2) talks about EINVAL for cases where the length
parameter is negative ... but that is a size_t - good luck having that
ever occur (the man page will soon be corrected as well.)

(kre)

Disable the USPACE cpu_switch_resume optimisation for 16KB PAGE_SIZE

Always check for existing TLB entry and remove it

Add a comment to say what's going on

(skrll)

Initialise md_upte for the new lwp
KASSERT that we're always direct mapped when we expect to be

(skrll)

Fixup the #if to reflect when we can have non-direct mappable USPACE

(skrll)

Correct a comment

(skrll)

More htree writing support (Hrishikesh Goyal GSoC 2016)

(christos)

KNF

(christos)

Import later FreeBSD version, add note about atomic.S which contains similar functions.

(scole)

Remove unused functions pte_atomic_clear() and pte_atomic_set()

(scole)

create++, destroy--

(kre)

Yet another -lrumpdev

(kre)

This now needs librumpdev and librumpvfs to work.

(pgoyette)

Need librumpdev and librumpvfs

(pgoyette)

This one needs librump dev (and librumpvfs) too

(pgoyette)

And this one also needs librumpvfs

(pgoyette)

More need for librumpdev

(pgoyette)

Send repeated start after command phase if there is any data phase
transfer, not just if the data phase a read operation.

(jakllsch)

No underscore needed

(pgoyette)

Adjust data pointer using current, rather than upcoming, transfer length.

(jakllsch)

We also need librump_vfs

While here, remove duplicate entry for librump

(pgoyette)

And yet another one

(pgoyette)

Another place where we need librumpdev

(pgoyette)

We now need librumpdev to resolve rumpns_config_cfdriver_attach which
is now used in a bunch of network modules/components

(pgoyette)

Import FreeBSD update

(scole)

Use MFC0_HAZARD - no functional change

(skrll)

Typo (missing ampersand)

(pgoyette)

Final part of fixing if_tap.  The module needs to attach its cdevsw (and
detach it later).

(pgoyette)

- Update VIA/Cyrix/Centaur-defined bits. Part of PR#39950
- Fix comment. x86_features[4] is not 0x80000001 but 0x00000001
- Update comment

(msaitoh)

Part 2 of fixing if_tap module.

(pgoyette)

Add the devsw_attach stuff, since the tap device can be accessed via
/dev/tap

This is a partial fix for the build.  The rump tap component will be
fixed shortly.

(pgoyette)

Partial fix - restore creation of our sysctl subtree for _MODULE
builds (it's already handled for built-in builds via registration
in a link-set).

XXX The build is still broken in rump...

(pgoyette)

More markup.

(wiz)

Fix compile without modules.

(roy)

regen.

(msaitoh)

Add some Xeon E5 v3 devices.

(msaitoh)

Restore ARP_STAT_DFRTOTAL deleted unexpectedly

(ozaki-r)

Typo.

(dholland)

Don't try to set-up our sysctl sub-tree if we're built-in - this will
happen automatically (via "registration" of the setup function in a
link-set), and if we're not a module, the SYSCTL_SETUP_PROTO() will
not have declared a function prototype!

(pgoyette)

Add rumpdev library since we're now calling config_cfdriver_attach()

Should fix the newly-introduced test failure.

(pgoyette)

Bump version for -no

(christos)

Fix wrong objdir-finding logic. PR 51389.

(dholland)

Make comment more readable - no functional changes

(palle)

finish ifmpls->mpls renaming.

(christos)

modularize some more drivers and merge the module glue

(christos)

missed this one

(christos)

Add some more drivers

(christos)

Sets for new modules

(christos)

add new modules

(christos)

don't load loopback as a module as other parts of the code use it directly.

(christos)

Fix compile for PCI_NETBSD_CONFIGURE

(skrll)

rename ifmpls to mpls, so we don't have if_ifmpls...

(christos)

Use "-no" and add more cloners.

(christos)

Accept "-no" as a "no" that does not cause errors if the object deleted
does not exist.

(christos)

KNF a little.

(maxv)

KNF a little.

(maxv)

Explicitly return syscall-specific error codes, instead of the ones given
by range_test. This fixes msync, mlock and munlock, which all return EINVAL
instead of ENOMEM if the address is not in the va space.

It should also fix the recent ATF failures.

(maxv)

Explain a little.

(maxv)

Fix two bugs for tlb_invalidate_addr for (PGSHIFT & 1) == 0

- t0/t1 weren't being updated when both lo0/lo1 become invalid
- the global bit (G) needs to be preserved if the entry becomes invalid

The MIPSNN optimisation is disabled for now as it needs to be updated
appropriately

(skrll)

Restore a MFC0_HAZARD lost in r1.68

(skrll)

Fix incorrect register usage in #if (PGSHIFT & 1) == 0 code

(skrll)

Remove unused <sys/tree.h>

(dholland)

Fix stupid thinko.

(dholland)

Create the kern.ccd sysctl sub-tree when built as a module.  Even though
the contents of the sub-tree are all structures, and thus not displayed
via sysctl(8), the info is potentially useful to programs.  (For example,
ccdconfig could use this to determine how many units are available.)

The sub-tree is already available when the module is included as built-in
module.

(pgoyette)

comments

(dholland)

For modular configurations, always build with PPPOE_TERM_UNKNOWN_SESSIONS
defined, and provide a sysctl variable for enabling/disabling the option.

Update man page accordingly.

(pgoyette)

If using constants from dirent.h it ought to be included.
Hopefully fixes i386 build.

(kre)

Remove unused <sys/tree.h>.

(dholland)

Note import of tzdata2016f

(kre)

Merge tzdata2016f

(kre)

use static properly

(dholland)

Comments

(dholland)

Modularize the pppoe driver

(pgoyette)

Destroy the mutex when detaching ppp.  Otherwise on a re-attach (ie,
module reload) we can end up with a panic "lock already initialized"

(pgoyette)

Catch up with the renaming of module ppp --> if_ppp and avoid warning
messages at boot (or module load) time.

(pgoyette)

Modularize the sppp_subr stuff so it can be shared by pppoe and lmc
drivers as they get modularized.

(pgoyette)

Disable gpio(4) attachment to ichlpcib(4) by default.

The GPIO lines on an ICH are usually connected to opaque platform-
defined functionality, and may be manipulated by the ACPI DSDT or other
mechanisms behind our backs.  In one instance, it was found this
in combiation with gpio_resume() sabotaged repeated suspend/resume cycles.

GPIO functionality can be enabled by setting ichlpcib_gpio_disable to 0,
for instance with `gdb -write`.

(jakllsch)

actually pass the d_type from the on-disk directory entry to the lookup results

(jdolecek)

Remove unused include of sys/tree.h

(martin)

typo in comment

(dholland)

Fix debug sets for ia64

(martin)

Set RTF_CONNECTED instead of setting only RTF_CONNECTED.

(roy)

The way the kernel tries to prevent a userland process from allocating page
zero is hugely flawed. It is easy to demonstrate that one can trick UVM
into chosing a NULL hint after the user_va0_disable check from uvm_map.
Such a bypass allows kernel NULL pointer dereferences to be exploitable on
architectures with a shared userland<->kernel VA, like amd64.

Fix this by increasing the limit of the vm space made available for
userland processes. This way, UVM will never chose a NULL hint, since it
would be outside of the vm space.

The user_va0_disable sysctl still controls this feature.

(maxv)

Use the stack to save %edx.

(maxv)

Workaround unexpected/undocumented behaviors of makefs(8).

(tsutsui)

sets for slip and strip

(christos)

make strip and slip modular, and cosmetic for ppp.

(christos)

Add modules for strip and slip

(christos)

Change the internal name of the module to match its external (file
system) name.  Otherwise "bad things" can happen, such as modload(8)
being able to load a second copy!

(pgoyette)

Resolve $NetBSD$ conflict

(pgoyette)

some more inode flags

(jdolecek)

rename the ppp module so that it autoloads.

(christos)

rename the ppp module so that it autoloads.

(christos)

Instead of listing cloners, try to create one so that the module autoloads.

(christos)

Modularize the ppp driver, and adjust dependencies of the compressor
modules.

For now, this is still included as a built-in module in GENERIC kernels.

(pgoyette)

Modify fpu_sin()'s logic to avoid GCC's warning that has been
pointed out in the previous commit.
For fpu_cos() there is no such problem, but sync with fpu_sin().

(isaki)

Expand discussion a bit, and provide ppp as an example way to do things.

(pgoyette)

Sync with HEAD

(pgoyette)

fix previous

(jakllsch)

add defines for the missing ext4 feature flags

(jdolecek)

Only include `static inline pmap_asid_check()` if it might be used.

Should fix HEAD-llvm evbppc autobuild.

(jakllsch)

simplify macepci_intr():
- use uint32_t
- always clear all error bits
- avoid a compiler bug(?) which caused the test for MACE_PERR_MASTER_ABORT
  to fail on n32
now my O2 no longer hangs when leaving cold

(macallan)

PR kern/7867 add support for UF_NODUMP flag to ext2fs

(jdolecek)

add devel ifndefs for incompat/rocompat features so that it's possible
to ignore them and mount the filesystem; default is for the mount to fail

(jdolecek)

PR port-ia64/51261

Use exec_elf64 modules for ia64

(scole)

PR port-ia64/51261

Use common/lib/libc/arch/ia64/string functions

(scole)

PR port-ia64/51261

Put skiload loader.efi loader.sym in /usr/mdec

(scole)

uk(4) is safe to suspend, register it as such

(maya)

PR port-ia64/51261

Add pci_enumerate_bus stub so kernels will compile

(scole)

PR port-ia64/51261

Import more variables from FreeBSD that will be needed later

(scole)

PR port-ia64/51261

Sync with FreeBSD, no functional changes

(scole)

PR port-ia64/51261

Add pci_enumerate_bus

(scole)