Initial import of tinydyndns, a simple and powerful dynamic DNS solution.

Delegate a subdomain to tinydyndns. Then, to update the DNS record
floyd.dyn.smarden.org, check the POP mailbox floyd@dyn.smarden.org.

(schmonz)

py-bintrees: register additional missing dependencies

This restores building the *.so file submitted in the initial PLIST.

Bump PKGREVISION again.

Thanks wiz@ for the heads up!

(khorben)

doc: Updated textproc/expat to 2.2.10nb1

(wiz)

expat: switch back to building with autoconf

Manually install xmlwf.1.

Fixes cyclic dependency between cmake and expat (on Solaris).

Bump PKGREVISION.

(wiz)

doc: Updated audio/fasttracker2 to 1.36

(fox)

audio/fasttracker2: Updates to v1.36

Changes since v1.35

v1.36 - 05.10.2020
- Bugfix: The 'S' volume column effect (set vibrato speed) should be ignored if
  the parameter is zero.
- Bugfix: The Kxx (key off) effect was not behaving like FT2 for values >$0f
- Bugfix: If attempting to WAV-render a song with an EEx (pattern delay) effect
  on the first row of a pattern, the render would end too early.
- Bugfix: In Disk Op., when loading a new module/sample, change the loaded
  filename extension according to save mode (f.ex. "test.xm" -> "test.wav").
- When changing the song position from the UI, reset global volume, and also
  reset pattern delay and other possible conflicts. FT2 doesn't do this, but I
  feel that this is a sensible thing to do.
- Made the About screen a bit more visually appealing
- Updated the "Known bugs" section of the help text
- Replayer code cleanup

(fox)

doc: Updated fonts/cascadia-ttf to 2009.22

(wiz)

cascadia-ttf: update to 2009.22.

2009.22

We realized the Freetype rendering issue documented in #350 had
been addressed in neither 2009.14 nor 2009.21. To that end, this
is a reissue of 2009.21 with that workaround in place.

So, without further ado (and with a new build pipeline thanks to
@madig!):

    We have implemented a workaround for a freetype rendering issue
    that resulted in chunky rendering for certain glyphs (#350)
    This bugfix release to the Cascadia family of fonts fixes
    diacritic positioning for the Salishan languages.

2009.14

This update to the Cascadia font family brings the following changes:

    Cascadia now has support for the Salishan languages of the
    Pacific Northwest and other coastal scripts!
    We've fixed an issue in the -<< ligature that caused it to
    overlap itself at certain font weights (#355)
    We remastered mark positioning for glyphs with existing diacritics
    for improved design for letters with multiple diacritics above
    We have implemented a workaround for a freetype rendering issue
    that resulted in chunky rendering for certain glyphs (#350)

(wiz)

doc: Updated devel/apache-ant to 1.10.9

(wiz)

apache-ant: update to 1.10.9.

Ant 1.10.9 contains a bugfixes and support for using GraalVM
JavaScript inside the script family of tasks and types..

It also addresses an insecure temporary file vulnerability
vulnerability, see the security report for details
(https://ant.apache.org/security.html)

(wiz)

libusb-compat: Use GITHUG_RELEASE instead of GITHUB_TAG

pkgsrc changes:
---------------
  * Switch to release tarball to remove the dependency on autotools.

(triaxx)

doc: Updated graphics/gimp to 2.10.22

(ryoon)

gimp: Update to 2.10.22

* Buildlink iso-codes and libheif.

Changelog:
Overview of Changes from GIMP 2.10.20 to GIMP 2.10.22
=====================================================

Core:

  - Verbose version information (`gimp-2.10 -v` on command line, or
    debug output) now displays Flatpak related information when
    available. This is especially useful for debugging (such as the
    exact Flatpak build hash, the runtime version, the installed
    Flatpak extensions, permissions, etc.).
  - OpenCL settings has now been moved to the Playground tab in
    Preferences.
  - On stable builds, "Playground" tab is now visible in Preferences if
    any of the experimental features has been enabled, even without the
    CLI option `--show-playground`.

Tools:

  - "gegl:matting-levin" now the default engine of Foreground Select
    tool (when present, as it is an optional feature) as it performs a
    lot better.
  - GEGL operations now display a "Sample merged" checkbox in Tool
    Options. This will be used when the operation allows to pick a color
    (hence one can pick from the edited layer or from visible data).
  - "Sample merged" now defaults to being activated in Color Picker and
    GEGL tools as it seems the less confusing for beginners who don't
    know of the option yet (according to a small poll we ran).

User interface:

  - In GimpSpinButton, don't propagate Enter key-press events if
    updating the spin-button's value in response changes the entered
    text. This prevents confirming dialogs when hitting Enter after
    entering a math expression in size entries, updating their value
    instead.
    Likewise, don't propagate Escape key-press events if a new value was
    entered, and restore the original value instead.
  - GimpMemSizeEntry improved to show appropriate binary prefixes
    (kibibyte, mebibyte and gibibyte) instead of decimal ones, to round
    properly when using higher units, and to not lose accuracy when
    possible when displaying in higher units.
  - Several of the biggest pages of the Preferences dialog are now
    scrollable, allowing the dialog to fit on smaller displays.

Plug-ins:

  - Add a new GIMP_EXPORT_NEEDS_CROP export capability, which causes
    gimp_export_image() to crop the exported image content to the image
    bounds; this is useful for formats that support layers, but have no
    concept of global image bounds, hence cropping is the only way to
    enforce the image bounds.
    When showing the export dialog, give an option to either crop the
    layers to the image bounds, or to resize the image to fit the
    layers.
  - Content type `image/webp` is now recognized (and not only
    `image/x-webp` as both seem to be in used and this format is
    unfortunately not yet listed in IANA media types (so various content
    types are in use, no clear standard apparently).
  - DDS import is now a bit more permissive, allowing to load some files
    with invalid header flags regarding compression, while we are able
    to know the right compression from other flags. This allows to
    recover invalid DDS files exported by other software.
  - JPEG detection improved to be more generic and reliable.
  - HEIF support improvements:
    - AVIF importing and exporting added (requires libheif 1.8.0+)
    - 10/12-bit importing and exporting now available for HEIC/AVIF
    - NCLX color profile import (link with LittleCMS)
    - Metadata support when importing
    - "Lossless" option is now called "Nearly lossless (YUV420 format)"
      because this is actually what it is, hence previous naming was
      misleading.
  - TIFF support improvements:
    - Add an option to crop the layers to the image bounds when exporting
      individual layers (using GIMP_EXPORT_NEEDS_CROP), since TIFF has no
      concept of global image bounds otherwise. Cropping is enabled
      by default.
    - TIFF export will not override "DocumentName" metadata tag anymore.
    - Stop writing file paths into TIFF DocumentNames as file paths can
      contain confidential information such as usernames and directory
      structures, making the previous behaviour a potential privacy and
      security risk.
    - Fix a file descriptor leak case which may have prevented a file
      from being opened on Windows.
  - Multiple improvements in the PSP import plug-in:
    - support reading raster layers of PSP version > 6,
    - support reading 16-bit integer PSP files,
    - support reading grayscale and indexed PSP files,
    - support PSP images with zero-length layer names,
    - fix wrong layer offset of layers,
    - fix reading layer names with high bit ASCII characters,
    - fix incorrect loading of PSP images with uncompressed channel data,
    - fix reading of creator block data of PSP images,
    - better error messages describing yet unsupported features,
    - improve reader stability by always using the block/chunk length.
  - Spyrogimp now works on Grayscale images and clutters less the undo
    history.
  - "Orientation" metadata is now reset whether you accepted to rotate
    the image or not when importing an image.
  - XPM does not export a "None" (transparent) color when unused.
  - BMP always include color masks when exporting BMP with color space
    info, as mandated by BITMAPV5HEADER specification.

Debugging:

  - Add progressive performance logs: progressive logs contain complete
    information after each recorded sample, by writing partial address
    maps at each sample, containing all new addresses introduced by the
    sample.
    This allows recording complete logs even in cases where they can't
    be properly terminated, such as when GIMP crashes or freezes in the
    middle of the log.
    Progressive logs are disabled by default, since they potentially
    increase the sampling cost. They can be enabled through a toggle
    in the log file-dialog, or through GIMP_PERFORMANCE_LOG_PROGRESSIVE
    environment variable.
    Performance log viewer can now process progressive performance logs
    too.
  - Allow controlling performance-log parameters through the UI.

Build:

  - new `distcheck` step in Continuous Integration.

Bug fixes:

    #2275, #2668, #2874, #3481, #3868, #4061, #4155, #4328, #4505, #4536,
    #4560, #4816, #5043, #5069, #5208, #5219, #5226, #5232, #5274, #5275,
    #5357, #5358, #5472, #5530, #5584, #5592, #5623, #5630, #5651

Translation updates:

  - Basque, Catalan, Chinese (China), Croatian, Danish, French, German,
    Italian, Japanese, Kazakh, Polish, Russian, Spanish, Swedish, Turkish,
    Ukrainian

(ryoon)

doc: Updated graphics/gegl to 0.4.26

(ryoon)

gegl: Update to 0.4.26

Changelog:
GEGL-0.4.26 2020-08-02
----------------------

Core:
~~~~~

Allow unsetting of property keys on paramspecs.

Operations:
~~~~~~~~~~~

perlin-noise: use a local random generator, avoiding resetting the global one.
transform: decrease epsilon for affine-detection, and round some affine matrices to be exact.

(ryoon)

doc: Updated graphics/babl to 0.1.82

(ryoon)

babl: Update to 0.1.82

Changelog:
2020-10-04 babl-0.1.82
Handle the parametric ICCv4 types that are not strictly the same type as core
sRGB curve.

2020-08-02 babl-0.1.80
meson build cleanups, depend on meson 0.54

(ryoon)

Updated devel/cmake, lang/nodejs

(adam)

nodejs: updated to 14.13.1

Version 14.13.1 (Current)

Notable Changes
fs:
remove experimental from rmdir recursive

(adam)

cmake: updated to 3.18.4

CMake 3.18.4
* FindJNI: Add aarch64 support
* VS: Populate `std:c{11,17}` flag table entries for v142
* OBJCXX: Fix regression for compiling cpp files as objcxx
* VS: Fix regression in C# source links
* FindPython: Fix erroneous regex in ABI check
* Clang: Look for llvm-lib when using MSVC-like front-end
* FindCUDA/select_compute_arch: Add CUDA 11.1 and SM86 support

(adam)

doc: Added emulators/suse131_32_openal version 13.1

(nia)

doc: Added emulators/suse131_openal version 13.1

(nia)

Add OpenAL to the SUSE 13.1 Linux emulation subsystem

(nia)

suse131_glx: Software rasterizer needs libexpat

(nia)

doc: Updated security/amass to 3.10.5

(leot)

amass: Update to 3.10.5

Changes
3.10.5
------
- update to dependency information
- small improvement to the timeout implementation
- data source responses are cached in passive mode
- constraints removed when querying data sources for new second-level domain names
- The viz and db subcommands are more similar in behavior
- DNS queries timeout quicker

(leot)

Updated devel/py-rope, devel/py-test-timeout

(adam)

py-test-timeout: updated to 1.4.2

1.4.2
Fix compatibility when run with pytest pre-releases, thanks Bruno Oliveira,
Fix detection of third-party debuggers, thanks Bruno Oliveira.

1.4.1
Fix coverage compatibility which was broken by 1.4.0.

1.4.0
Better detection of when we are debugging, thanks Mattwmaster58.

(adam)

py-rope: updated to 0.18.0

Release 0.18.0:
- Fix `Worder.get_primary_at` for names that start like
  keywords.
- Add guess_def_lineno() to get actual function/class
  definition line number
- Fix SimilarFinder/_ASTMatcher to consider 1/0 and True/False
  to be unequal
- Compatibility with Python 3.8
- Add pytest.ini to collect all tests

(adam)

logrotate: fix build on NetBSD

(no secure_getenv function)

(wiz)

py-hpack: remove patch removed from distinfo in 4.0.0 update

(wiz)

Note update of net/unbound to 1.12.0.

(he)

Update net/unbound to version 1.12.0.

Pkgsrc changes:
* Add option for doh (DNS-over-HTTPS), default enabled.

Upstream changes:

This release contains the DNS Flag Day 2020 changes.  This sets the
default EDNS buffer size to 1232, that should reduce fragmentation.
https://dnsflagday.net/2020/

There is inclusive language in the configuration.  There is caps-exempt,
ipsecmod-allow and primary server options for auth-zones.  The older
terms are accepted to keep configuration working.

DNS-over-HTTPS is supported in this release.  The DoH is enabled when
Unbound is compiled with the nghttp2 library, with configure
--with-libnghttp2.  Then have an interface on the https port, that can
be configured with the https-port option.  Also have a cert and key
available with the tls-service-key and tls-service-pem options.  Further
settings can be configured for the http-endpoint, http-max-streams,
http-query-buffer-size, http-response-buffer-size and http-nodelay
options.  The max streams sets the maximum concurrent streams, the
buffer size options the number of bytes in buffers, and the nodelay
option can turn on TCP_NODELAY for DNS-over-HTTPS service.  In the
statistics the memory used is reported in mem.http.query_buffer and
mem.http.response_buffer.  The number of queries is reported in
num.query.https, they are also included in the tcp and tls counts
because https uses TLS and TCP.

The DLV options and code to handle DLV lookups have been removed from
the code base.  The DLV repository is empty nowadays, it has been
decommissioned.

There is a new feature where it is possible to use interface names to
bind to the IP addresses on that interface.  It pulls in the addresses
at the start of the server, if the addresses change, use the existing
freebind and other socket options to register for addresses before they
appear, or the interface-automatic option that copies them from queries
to answers with ancillary data.

There is a new option for the edns-tag draft specification.  It can be
enabled if you need the tentative implementation to add those tags to
outgoing messages.

Features
- DNS Flag Day 2020: change edns-buffer-size default to 1232.
- Merge PR #255: DNS-over-HTTPS support.
- Use inclusive language in configuration
- Merge PR #284 and Fix #246: Remove DLV entirely from Unbound.
  The DLV has been decommisioned and in unbound 1.5.4, in 2015, there
  was advise to stop using it.  The current code base does not contain
  DLV code any more.  The use of dlv options displays a warning.
- Similar to NSD PR#113, implement that interface names can be used,
  eg. something like interface: eth0 is resolved at server start and
  uses the IP addresses for that named interface.
- Merge PR #272: Add EDNS client tag functionality.
- Add edns-client-tag-opcode option

Bug Fixes
- Merge PR #270 from cgzones: munin plugin: always exit 0 in autoconf
- Merge PR #269, Fix python module len() implementations, by Torbj�rn
  L�nnemark
- Merge PR #268, draft-ietf-dnsop-serve-stale-10 has become RFC 8767 on
  March 2020, by and0x000.
- Fix doxygen comment for no ssl for tls session ticket key callback
  routine.
- Fix mini_event.h on OpenBSD cannot find fd_set.
- Improve error log message when inserting rpz RR.
- Merge PR #280, Make tvOS & watchOS checks verify truthiness as well as
  definedness, by Felipe Gasper.
- contrib/aaaa-filter-iterator.patch file renewed diff content to
  apply cleanly to the current coderepo for the current code version.
- Fix #287: doc typo: "Additionaly".
- Merge (modified) PR #277, use EVP_MAC_CTX_set_params if available,
  by V�t#zslav #�#ek.
- Create and init edns tags data for libunbound.
- Fix stats double count issue (#289).
- Fix that dnstap reconnects do not spam the log with the repeated
  attempts.  Attempts on the timer are only logged on high verbosity,
  if they produce a connection failure error.
- Fix to apply chroot to dnstap-socket-path, if chroot is enabled.
- Change configure to use EVP_sha256 instead of HMAC_Update for
  openssl-3.0.0.
- Update documentation in python example code.
- Review fix interface, doxygen and assign null in case of error free.
- Merge PR #293: Add missing prototype.  Also refactor to use the new
  shorthand function to clean up the code.
- Refactor to use sock_strerr shorthand function.
- Fix #296: systemd nss-lookup.target is reached before unbound can
  successfully answer queries. Changed contrib/unbound.service.in.
- Fix num.expired statistics output.
- Remove x file mode on ipset/ipset.c and h files.
- Spelling fix.
- Introduce test for statistics.
- Fix that prefer-ip4 and prefer-ip6 can be get and set with
  unbound-control, with libunbound and the unbound-checkconf option
  output function.
- Merge PR #311 by luismerino: Dynlibmod leak.
- Error message is logged for dynlibmod malloc failures.
- iana portlist updated.
- Fix #304: dnstap logging not recovering after dnstap process restarts
- Fix edns-client-tags get_option typo
- Fix #305: dnstap logging significantly affects unbound performance
  (regression in 1.11).
- Fix #305: only wake up thread when threshold reached.
- Fix to ifdef fptr wlist item for dnstap.
- Fix memory leak of edns tags at libunbound context delete.
- Fix double loopexit for unbound-dnstap-socket after sigterm.

(he)

Describe new(ish) options:
doh -- Enable DNS-over-HTTPS support.
softhsm2 -- Enable SoftHSM version 2 for key management.

(he)

doc: Updated devel/valgrind to 3.16.1

(mcf)

valgrind: update to 3.16.1

Release 3.16.1 (22 June 2020)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3.16.1 fixes two critical bugs discovered after 3.16.0 was frozen.  It also
fixes character encoding problems in the documentation HTML.

Release 3.16.0 (27 May 2020)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3.16.0 is a feature release with many improvements and the usual collection of
bug fixes.

This release supports X86/Linux, AMD64/Linux, ARM32/Linux, ARM64/Linux,
PPC32/Linux, PPC64BE/Linux, PPC64LE/Linux, S390X/Linux, MIPS32/Linux,
MIPS64/Linux, ARM/Android, ARM64/Android, MIPS32/Android, X86/Android,
X86/Solaris, AMD64/Solaris and AMD64/MacOSX 10.12.  There is also preliminary
support for X86/macOS 10.13, AMD64/macOS 10.13 and nanoMIPS/Linux.

* ==================== CORE CHANGES ===================

* It is now possible to dynamically change the value of many command line
  options while your program (or its children) are running under Valgrind.

  To see the list of dynamically changeable options, run
    "valgrind --help-dyn-options".

  You can change the options from the shell by using vgdb to launch
  the monitor command "v.clo <clo option>...".
  The same monitor command can be used from a gdb connected
  to the valgrind gdbserver.
  Your program can also change the dynamically changeable options using
  the client request VALGRIND_CLO_CHANGE(option).

* ================== PLATFORM CHANGES =================

* MIPS: preliminary support for nanoMIPS instruction set has been added.

* ==================== TOOL CHANGES ====================

* DHAT:

  - The implicit memcpy done by each call to realloc now counts towards the
    read and write counts of resized heap blocks, making those counts higher
    and more accurate.

* Cachegrind:

  - cg_annotate's --auto and --show-percs options now default to 'yes', because
    they are usually wanted.

* Callgrind:

  - callgrind_annotate's --auto and --show-percs options now default to 'yes',
    because they are usually wanted.

  - The command option --collect-systime has been enhanced to specify
    the unit used to record the elapsed time spent during system calls.
    The command option now accepts the values no|yes|msec|usec|nsec,
    where yes is a synonym of msec.  When giving the value nsec, the
    system cpu time of system calls is also recorded.

* Memcheck:

  - Several memcheck options are now dynamically changeable.
    Use  valgrind --help-dyn-options  to list them.

  - The release 3.15 introduced a backward incompatible change for
    some suppression entries related to preadv and pwritev syscalls.
    When reading a suppression entry using the unsupported 3.14 format,
    valgrind will now produce a warning to say the suppression entry will not
    work, and suggest the needed change.

  - Significantly fewer false positive errors on optimised code generated by
    Clang and GCC.  In particular, Memcheck now deals better with the
    situation where the compiler will transform C-level "A && B" into "B && A"
    under certain circumstances (in which the transformation is valid).
    Handling of integer equality/non-equality checks on partially defined
    values is also improved on some architectures.

* exp-sgcheck:

  - The exprimental Stack and Global Array Checking tool has been removed.
    It only ever worked on x86 and amd64, and even on those it had a
    high false positive rate and was slow.  An alternative for detecting
    stack and global array overruns is using the AddressSanitizer (ASAN)
    facility of the GCC and Clang compilers, which require you to rebuild
    your code with -fsanitize=address.

* ==================== OTHER CHANGES ====================

* New and modified GDB server monitor features:

  - Option -T tells vgdb to output a timestamp in the vgdb information messages.

  - The gdbserver monitor commands that require an address and an optional
    length argument now accepts the alternate 'C like' syntax "address[length]".
    For example, the memcheck command "monitor who_points_at 0x12345678 120"
    can now also be given as "monitor who_points_at 0x12345678[120]".

Release 3.15.0 (12 April 2019)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3.15.0 is a feature release with many improvements and the usual collection of
bug fixes.

This release supports X86/Linux, AMD64/Linux, ARM32/Linux, ARM64/Linux,
PPC32/Linux, PPC64BE/Linux, PPC64LE/Linux, S390X/Linux, MIPS32/Linux,
MIPS64/Linux, ARM/Android, ARM64/Android, MIPS32/Android, X86/Android,
X86/Solaris, AMD64/Solaris and AMD64/MacOSX 10.12.  There is also preliminary
support for X86/macOS 10.13 and AMD64/macOS 10.13.

* ==================== CORE CHANGES ===================

* The XTree Massif output format now makes use of the information obtained
  when specifying --read-inline-info=yes.

* amd64 (x86_64): the RDRAND and F16C insn set extensions are now supported.

* ==================== TOOL CHANGES ====================

* DHAT:

  - DHAT been thoroughly overhauled, improved, and given a GUI.  As a result,
    it has been promoted from an experimental tool to a regular tool.  Run it
    with --tool=dhat instead of --tool=exp-dhat.

  - DHAT now prints only minimal data when the program ends, instead writing
    the bulk of the profiling data to a file.  As a result, the --show-top-n
    and --sort-by options have been removed.

  - Profile results can be viewed with the new viewer, dh_view.html.  When
    a run ends, a short message is printed, explaining how to view the result.

  - See the documentation for more details.

* Cachegrind:

  - cg_annotate has a new option, --show-percs, which prints percentages next
    to all event counts.

* Callgrind:

  - callgrind_annotate has a new option, --show-percs, which prints percentages
    next to all event counts.

  - callgrind_annotate now inserts commas in call counts, and
    sort the caller/callee lists in the call tree.

* Massif:

  - The default value for --read-inline-info is now "yes" on
    Linux/Android/Solaris. It is still "no" on other OS.

* Memcheck:

  - The option --xtree-leak=yes (to output leak result in xtree format)
    automatically activates the option --show-leak-kinds=all, as xtree
    visualisation tools such as kcachegrind can in any case select what kind
    of leak to visualise.

  - There has been further work to avoid false positives.  In particular,
    integer equality on partially defined inputs (C == and !=) is now handled
    better.

* ==================== OTHER CHANGES ====================

* The new option --show-error-list=no|yes displays, at the end of the run, the
  list of detected errors and the used suppressions.  Prior to this change,
  showing this information could only be done by specifying "-v -v", but that
  also produced a lot of other possibly-non-useful messages.  The option -s is
  equivalent to --show-error-list=yes.

Release 3.14.0 (9 October 2018)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3.14.0 is a feature release with many improvements and the usual collection of
bug fixes.

This release supports X86/Linux, AMD64/Linux, ARM32/Linux, ARM64/Linux,
PPC32/Linux, PPC64BE/Linux, PPC64LE/Linux, S390X/Linux, MIPS32/Linux,
MIPS64/Linux, ARM/Android, ARM64/Android, MIPS32/Android, X86/Android,
X86/Solaris, AMD64/Solaris and AMD64/MacOSX 10.12.  There is also preliminary
support for X86/macOS 10.13, AMD64/macOS 10.13.

* ==================== CORE CHANGES ===================

* The new option --keep-debuginfo=no|yes (default no) can be used to retain
  debug info for unloaded code.  This allows saved stack traces (e.g. for
  memory leaks) to include file/line info for code that has been dlclose'd (or
  similar).  See the user manual for more information and known limitations.

* Ability to specify suppressions based on source file name and line number.

* Majorly overhauled register allocator.  No end-user changes, but the JIT
  generates code a bit more quickly now.

* ================== PLATFORM CHANGES =================

* Preliminary support for macOS 10.13 has been added.

* mips: support for MIPS32/MIPS64 Revision 6 has been added.

* mips: support for MIPS SIMD architecture (MSA) has been added.

* mips: support for MIPS N32 ABI has been added.

* s390: partial support for vector instructions (integer and string) has been
  added.

* ==================== TOOL CHANGES ====================

* Helgrind: Addition of a flag
  --delta-stacktrace=no|yes [yes on linux amd64/x86]
  which specifies how full history stack traces should be computed.
  Setting this to =yes can speed up Helgrind by 25% when using
  --history-level=full.

* Memcheck: reduced false positive rate for optimised code created by Clang 6
  / LLVM 6 on x86, amd64 and arm64.  In particular, Memcheck analyses code
  blocks more carefully to determine where it can avoid expensive definedness
  checks without loss of precision.  This is controlled by the flag
  --expensive-definedness-checks=no|auto|yes [auto].

* ==================== OTHER CHANGES ====================

* Valgrind is now buildable with link-time optimisation (LTO).  A new
  configure option --enable-lto=yes allows building Valgrind with LTO.  If the
  toolchain supports it, this produces a smaller/faster Valgrind (up to 10%).
  Note that if you are doing Valgrind development, --enable-lto=yes massively
  slows down the build process.

(mcf)

sort

(jnemeth)

add and enable maubot

(jnemeth)

sort

(jnemeth)

mit-krb5: Add patch comment and note that it has been filed upstream

(gdt)

emacs: amend comments in modules.mk

Update a (self-referencing) comment to reflect the current name and
location, and misc. grammar, style, and consistency fixes.

(gutteridge)

doc: Updated security/mit-krb5 to 1.18.2

(gdt)

mit-kerberos: Update to 1.18.2

Upstream README excerpt:

Major changes in 1.18.2 (2020-05-21)

    Fix a SPNEGO regression where an acceptor using the default credential would improperly filter mechanisms, causing a negotiation failure.
    Fix a bug where the KDC would fail to issue tickets if the local krbtgt principal's first key has a single-DES enctype.
    Add stub functions to allow old versions of OpenSSL libcrypto to link against libkrb5.
    Fix a NegoEx bug where the client name and delegated credential might not be reported.

Major changes in 1.18.1 (2020-04-13)

    Fix a crash when qualifying short hostnames when the system has no primary DNS domain.
    Fix a regression when an application imports "service@" as a GSS host-based name for its acceptor credential handle.
    Fix KDC enforcement of auth indicators when they are modified by the KDB module.
    Fix removal of require_auth string attributes when the LDAP KDB module is used.
    Fix a compile error when building with musl libc on Linux.
    Fix a compile error when building with gcc 4.x.
    Change the KDC constrained delegation precedence order for consistency with Windows KDCs.

(gdt)

doc: Updated textproc/oniguruma to 6.9.6rc1

(kim)

oniguruma: updated to 6.9.6rc1

Add handling of -revN as plN (instead of .N) and -rcN as rcN in Makefile.
Use the -revN or -rcN naming in DISTFILE, as they are (apparently) created
automatically by GitHub. Munge GITHUB_RELEASE to produce the tag name with
an underscore instead of a hyphen before rev or rc. Munge WRKSRC to strip
both -revN and -rcN.

6.9.6 Release Candidate 1
- In a Unix environment, if you have the POSIX API enabled in
  an earlier version (disabled by default in 6.9.5) and you
  need application binary compatibility with the POSIX API,
  specify "--enable-binary-compatible-posix-api=yes" instead of
  "--enable-posix-api=yes". "--enable-posix-api=yes" only supports
  source-level compatibility for POSIX API since 6.9.6.
- NEW: configure option --enable-binary-compatible-posix-api=[yes/no]
- NEW API: Limiting the maximum number of calls of subexp-call
- NEW API: ONIG_OPTION_NOT_BEGIN_STRING / NOT_END_STRING /
  NOT_BEGIN_POSITION
- Fixed behavior of ONIG_OPTION_NOTBOL / NOTEOL
- Fixed many problems found by OSS-Fuzz
- Fixed many problems found by Coverity
- Fixed CVE-2020-26159

(kim)

doc: Updated benchmarks/google-benchmark to 1.5.2

(wiz)

google-benchmark: update to 1.5.2.

    Timestamps in output are now rfc3339-formatted #965
    overflow warnings with timers fixed #980
    Python dependencies are now covered by a requirements.txt #994
    JSON output cleaned up when no CPU scaling is present (#1008)
    CartesianProduct added for easier settings of multiple ranges (#1029)
    Python bindings improvements:
        Custom main functions (#993)
        A rename to google_benchmark (#199
        More state methods bound (#1037) with a builder interface (#1040)
    Workflow additions in github include pylint (#1039) and bindings runs (#1041)

(wiz)

doc: Updated devel/appstream-glib to 0.7.18

(wiz)

appstream-glib: update to 0.7.18.

Version 0.7.18
~~~~~~~~~~~~~~
Released: 2020-09-07

New Features:
- Add content rating system APIs from gnome-software (Philip Withnall)
- Add "validate-version" command (Florian Müllner)

Bugfixes:
- Allow timestamp in the future in validate-relax (Bartłomiej Piotrowski)
- Don't ignore localized strings that are the same as original (Isaque Galdino)
- Fix crash with invalid children of <ul/> (Fabian Vogt)
- Lower the OARS/CSM mapping of sex-homosexuality/intense (Philip Withnall)
- Properly initialize mutexes (Laurent Bigonville)
- Test launchable tags in validation (Ian McInerney)

(wiz)

py-cachecontrol: Install "versioned" doesitcache

Possible multiple version of py-cachecontrol can now peacefully coexist.

Discussed with <schmonz>.

PKGREVISION++

(leot)

py-cachecontrol: Remove duplicate `python' in CATEGORIES

(leot)

doc: Updated textproc/expat to 2.2.10

(wiz)

expat: update to 2.2.10.

Use cmake for building.

Release 2.2.10 Sat October 3 2020
        Bug fixes:
  #390 #395 #398  Fix undefined behavior during parsing caused by
                    pointer arithmetic with NULL pointers
      #404 #405  Fix reading uninitialized variable during parsing
            #406  xmlwf: Add missing check for malloc NULL return

        Other changes:
            #396  Windows: Drop support for Visual Studio <=8.0/2005
            #409  Windows: Add missing file "Changes" to the installer
                    to fix compilation with CMake from installed sources
            #403  xmlwf: Document exit codes in xmlwf manpage and
                    exit with code 3 (rather than code 1) for output errors
                    when used with "-d DIRECTORY"
      #356 #359  MinGW: Provide declaration of rand_s for mingwrt <5.3.0
      #383 #392  Autotools: Use -Werror while configure tests the compiler
                    for supported compile flags to avoid false positives
  #383 #393 #394  Autotools: Improve handling of user (C|CPP|CXX|LD)FLAGS,
                    e.g. ensure that they have the last word over flags added
                    while running ./configure
            #360  CMake: Create libexpatw.{dll,so} and expatw.pc (with emphasis
                    on suffix "w") with -DEXPAT_CHAR_TYPE=(ushort|wchar_t)
            #360  CMake: Detect and deny unsupported build combinations
                    involving -DEXPAT_CHAR_TYPE=(ushort|wchar_t)
            #360  CMake: Install pre-compiled shipped xmlwf.1 manpage in case
                    of -DEXPAT_BUILD_DOCS=OFF
  #375 #380 #419  CMake: Fix use of Expat by means of add_subdirectory
      #407 #408  CMake: Keep expat target name constant at "expat"
                    (i.e. refrain from using the target name to control
                    build artifact filenames)
            #385  CMake: Fix compilation with -DEXPAT_SHARED_LIBS=OFF for
                    Windows
                  CMake: Expose man page compilation as target "xmlwf-manpage"
      #413 #414  CMake: Introduce option EXPAT_BUILD_PKGCONFIG
                    to control generation of pkg-config file "expat.pc"
            #424  CMake: Add minimalistic support for building binary packages
                    with CMake target "package"; based on CPack
            #366  CMake: Add option -DEXPAT_OSSFUZZ_BUILD=(ON|OFF) with
                    default OFF to build fuzzer code against OSS-Fuzz and
                    related environment variable LIB_FUZZING_ENGINE
            #354  Fix testsuite for -DEXPAT_DTD=OFF and -DEXPAT_NS=OFF, each
    #354 #355 ..
      #356 #412  Address compiler warnings
      #368 #369  Address pngcheck warnings with doc/*.png images
                  Version info bumped from 7:11:6 to 7:12:6

        Special thanks to:
            asavah
            Ben Wagner
            Bhargava Shastry
            Frank Landgraf
            Jeffrey Walton
            Joe Orton
            Kleber Tarcísio
            Ma Lin
            Maciej Sroczyński
            Mohammed Khajapasha
            Vadim Zeitlin
                and
            Cppcheck 2.0 and the Cppcheck team

(wiz)

doc: Updated mail/feed2exec to 0.16.0

(schmonz)

Update to 0.16.0. From the changelog:

API changes:

* refactoring into a somewhat MVC model: split large feeds.py into
  model.py and controller.py
* rename FeedCacheStorage to FeedItemCacheStorage
* factor out getter/setters in the base sqlite class
* remove conn member in sqlite to force use of context manager
* move session and fetching to the feed manager
* rename feeds to feed_manager in main
* allow absolute path in folder setting (Closes: #14)

New features:

* caching: latest feed contents get cached to avoid re-downloading
  unchanged feeds. this includes parsing HTTP headers and so on, and
  relies on the good behavior of the `cachecontrol` Python module
* Python 3.6-3.8 support

Bugfixes:
* recover from feedparser exceptions (Closes: #964597)

[ Roland Hieber ]
* README: don't let the example config create a folder named '~/Mailbox/'

[ Ian Zimmerman ]
* add --quiet option to silence warnings since --loglevel was broken

(schmonz)

doc: Added devel/py-cachecontrol version 0.12.6

(schmonz)

Add and enable py-cachecontrol.

(schmonz)

Initial import of py-cachecontrol, a port of the caching algorithms in
httplib2 for use with requests session object.

It was written because httplib2's better support for caching is often
mitigated by its lack of thread safety. The same is true of requests in
terms of caching.

(schmonz)

checksum.awk: Avoid warnings with newer gawk.

Reported by J旦rn Clausen in PR#55581.

(jperkin)

gxemul: Fix install failure, remove .orig file

(ryoon)

(cad/dinotrace) Add missing BUILD_DEPENDS

(mef)

Updated misc/py-tqdm, www/py-google-api-python-client

(adam)

py-google-api-python-client: updated to 1.12.3

1.12.3:

Bug Fixes
deps: update setup.py to install httplib2>=0.15.0

1.12.2:

Bug Fixes
add method to close httplib2 connections

1.12.1:

Bug Fixes
deps: require six>=1.13.0

1.12.0:

Features
add quota_project, credentials_file, and scopes support

Documentation
convert print statement to function
remove http from batch execute docs

(adam)

py-tqdm: updated to 4.50.1

tqdm v4.50.1 stable

fix multiprocessing lock creation leak
fixes 617 which introduced this bug (v4.29.0, released 2019-01-06, undiagnosed until now) where multiple threads could concurrently create and append process locks to a global list, then try to release them without first acquiring �汨ｿ
major test overhaul: fix, update, and speed up
misc CI framework updates
code linting
minor documentation tidy

tqdm v4.50.0 stable

add bar colour option
for notebook as well as std/CLI
plain text as well as hex (e.g. 'green' or '#00ff00')
notebook improvements
split bar description into separate widget
improve reset() (handle width and colour)
fix exceptions when file is closed
add & update tests
minor documentation updates
move and configure issue/pr templates

tqdm v4.49.0 stable

CLI: add --tee
CLI: add --update and --update_to
CLI: add --null
CLI: accept - instead of _ in options (e.g. --update-to)
make update() return True on display to ease efficient use of custom callbacks
fix py>=3 CLI --delim encoding error
fix py>=3.5 version detection in tqdm.auto
fix final ETA when using initial
update documentation
add & update custom callback examples
improve help formatting of boolean CLI options
add & update tests

(adam)

doc: Updated security/tor-browser to 10.0

(wiz)

tor-browser: update to 10.0.

Tor Browser 10.0 -- September 22 2020
* Windows + OS X + Linux
  * Update Firefox to 78.3.0esr
  * Update Tor to 0.4.4.5
  * Update Tor Launcher to 0.2.25
    * Bug 32174: Replace XUL <textbox> with <html:input>
    * Bug 33890: Rename XUL files to XHTML
    * Bug 33862: Fix usages of createTransport API
    * Bug 33906: Fix Tor-Launcher issues for Firefox 75
    * Bug 33998: Use CSS grid instead of XUL grid
    * Bug 34164: Tor Launcher deadlocks during startup (Firefox 77)
    * Bug 34206: Tor Launcher button labels are missing (Firefox 76)
    * Bug 40002: After rebasing to 80.0b2 moat is broken [tor-launcher]
    * Translations update
  * Update NoScript to 11.0.44
    * Bug 40093: Youtube videos on safer produce an error [tor-browser]
  * Translations update
  * Bug 10394: Let Tor Browser update HTTPS Everywhere
  * Bug 11154: Disable TLS 1.0 (and 1.1) by default
  * Bug 16931: Sanitize the add-on blocklist update URL
  * Bug 17374: Disable 1024-DH Encryption by default
  * Bug 21601: Remove unused media.webaudio.enabled pref
  * Bug 30682: Disable Intermediate CA Preloading
  * Bug 30812: Exempt about: pages from Resist Fingerprinting
  * Bug 31918+33533+40024+40037: Rebase Tor Browser esr68 patches for ESR 78 [tor-browser]
  * Bug 32612: Update MAR_CHANNEL_ID for the alpha
  * Bug 32886: Separate treatment of @media interaction features for desktop and android
  * Bug 33534: Review FF release notes from FF69 to latest (FF78)
  * Bug 33697: Use old search config based on list.json
  * Bug 33721: PDF Viewer is not working in the safest security level
  * Bug 33734: Set MOZ_NORMANDY to False
  * Bug 33737: Fix aboutDialog.js error for Firefox nightlies
  * Bug 33848: Disable Enhanced Tracking Protection
  * Bug 33851: Patch out Parental Controls detection and logging
  * Bug 33852: Clean up about:logins to not mention Sync
  * Bug 33856: Set browser.privatebrowsing.forceMediaMemoryCache to True
  * Bug 33862: Fix usages of createTransport API
  * Bug 33867: Disable password manager and password generation
  * Bug 33890: Rename XUL files to XHTML
  * Bug 33892: Add brandProductName to brand.dtd and brand.properties
  * Bug 33962: Uplift patch for bug 5741 (dns leak protection)
  * Bug 34125: API change in protocolProxyService.registerChannelFilter
  * Bug 40001: Generate tor-browser-brand.ftl when importing translations [torbutton]
  * Bug 40002: Remove about:pioneer [tor-browser]
  * Bug 40002: Fix generateNSGetFactory being moved to ComponentUtils [torbutton]
  * Bug 40003: Adapt code for L10nRegistry API changes [torbutton]
  * Bug 40005: Initialize the identity UI before setting up the circuit display [torbutton]
  * Bug 40006: Fix new identity for 81 [torbutton]
  * Bug 40007: Move SecurityPrefs initialization to the StartupObserver component [torbutton]
  * Bug 40008: Style fixes for 78 [torbutton]
  * Bug 40016: Update Snowflake to discover NAT type [tor-browser-build]
  * Bug 40017: Audit Firefox 68-78 diff for proxy issues [tor-browser]
  * Bug 40022: Update new icons in Tor Browser branding [tor-browser]
  * Bug 40025: Revert add-on permissions due to Mozilla's 1560059 [tor-browser]
  * Bug 40036: Remove product version/update channel from #13379 patch [tor-browser]
  * Bug 40038: Review RemoteSettings for ESR 78 [tor-browser]
  * Bug 40048: Disable various ESR78 features via prefs [tor-browser]
  * Bug 40059: Verify our external helper patch is still working [tor-browser]
  * Bug 40066: Update existing prefs for ESR 78 [tor-browser]
  * Bug 40066: Remove default bridge 37.218.240.34 [tor-browser-build]
  * Bug 40073: Disable remote Public Suffix List fetching [tor-browser]
  * Bug 40073: Repack omni.ja to include builtin HTTPS Everywhere [tor-browser-build]
  * Bug 40078: Backport patches for bug 1651680 for now [tor-browser]
  * Bug 40082: Let JavaScript on safest setting handled by NoScript again [tor-browser]
  * Bug 40088: Moat "Submit" button does not work
  * Bug 40090: Disable v3 add-on blocklist for now [tor-browser]
  * Bug 40091: Load HTTPS Everywhere as a builtin addon [tor-browser]
  * Bug 40102: Fix UI bugs in Tor Browser 10.0 alpha [tor-browser]
  * Bug 40106: Cannot install addons in full screen mode [tor-browser]
  * Bug 40109: Playing video breaks after reloading pages [tor-browser]
  * Bug 40119: Enable v3 extension blocklisting again [tor-browser]
* Windows
  * Bug 33855: Don't use site's icon as window icon in Windows in private mode
  * Bug 40061: Omit the Windows default browser agent from the build [tor-browser]
* OS X
  * Bug 32252: Tor Browser does not display correctly in VMWare Fusion on macOS (mojave)
* Build System
  * Windows + OS X + Linux
    * Bump Go to 1.14.7
    * Bug 31845: Bump GCC version to 9.3.0
    * Bug 34011: Bump clang to 9.0.1
    * Bug 34014: Enable sqlite3 support in Python
    * Bug 34390: Don't copy DBM libraries anymore
    * Bug 34391: Remove unused --enable-signmar option
    * Bug 40004: Adapt Rust project for Firefox 78 ESR [tor-browser-build]
    * Bug 40005: Adapt Node project for Firefox 78 ESR [tor-browser-build]
    * Bug 40006: Adapt cbindgen for Firefox 78 ESR [tor-browser-build]
    * Bug 40037: Move projects over to clang-source [tor-browser-build]
    * Bug 40026: Fix full .mar creation for esr78 [tor-browser-build]
    * Bug 40027: Fix incremental .mar creation for esr78 [tor-browser-build]
    * Bug 40028: Do not reference unset env variables [tor-browser-build]
    * Bug 40031: Add licenses for kcp-go and smux. [tor-browser-build]
    * Bug 40045: Fix complete .mar file creation for dmg2mar [tor-browser-build]
    * Bug 40065: Bump debootstrap-image ubuntu_version to 20.04.1 [tor-browser-build]
    * Bug 40087: Deterministically add HTTPS Everywhere into omni.ja [tor-browser-build]
  * Windows
    * Bug 34230: Update Windows toolchain for Firefox 78 ESR
    * Bug 40015: Use only 64bit fxc2 [tor-browser-build]
    * Bug 40017: Enable stripping again on Windows [tor-browser-build]
    * Bug 40052: Bump NSIS to 3.06.1 [tor-browser-build]
    * Bug 40061: Omit the Windows default browser agent from the build [tor-browser]
    * Bug 40071: Be explicit about no SEH with mingw-w64 on 32bit systems [tor-browser-build]
    * Bug 40077: Don't pass --no-insert-timestamp when building Firefox [tor-browser-build]
    * Bug 40090: NSIS 3.06.1 based builds are not reproducible anymore [tor-browser-build]
  * OS X
    * Bug 34229: Update macOS toolchain for Firefox 78 ESR
    * Bug 40003: Update cctools version for Firefox 78 ESR [tor-browser-build]
    * Bug 40018: Add libtapi project for cctools [tor-browser-build]
    * Bug 40019: Ship our own runtime library for macOS [tor-browser-build]
  * Linux
    * Bug 34359: Adapt abicheck.cc to deal with newer GCC version
    * Bug 34386: Fix up clang compilation on Linux
    * Bug 40053: Also create the langpacks tarball for non-release builds [tor-browser-build]

Tor Browser 10.0a7 -- September 14 2020
* Windows + OS X + Linux
  * Update Tor Launcher to 0.2.24
  * Update NoScript to 11.0.43
  * Translations update
  * Bug 10394: Let Tor Browser update HTTPS Everywhere
  * Bug 32017: Use ExtensionStorageIDB again
  * Bug 40006: Fix new identity for 81 [torbutton]
  * Bug 40007: Move SecurityPrefs initialization to the StartupObserver component [torbutton]
  * Bug 40008: Style fixes for 78 [torbutton]
  * Bug 40066: Remove default bridge 37.218.240.34 [tor-browser-build]
  * Bug 40073: Repack omni.ja to include builtin HTTPS Everywhere [tor-browser-build]
  * Bug 40091: Load HTTPS Everywhere as a builtin addon [tor-browser]
  * Bug 40102: Fix UI bugs in Tor Browser 10.0 alpha [tor-browser]
  * Bug 40109: Playing video breaks after reloading pages [tor-browser]
  * Big 40119: Enable v3 extension blocklisting again [tor-browser]
* Build System
  * Windows + OS X + Linux
    * Bump Go to 1.14.7
    * Bug 40031: Add licenses for kcp-go and smux. [tor-browser-build]
    * Bug 40045: Fix complete .mar file creation for dmg2mar [tor-browser-build]
    * Bug 40065: Bump debootstrap-image ubuntu_version to 20.04.1 [tor-browser-build]
    * Bug 40087: Deterministically add HTTPS Everywhere into omni.ja [tor-browser-build]
  * Windows
    * Bug 40052: Bump NSIS to 3.06.1 [tor-browser-build]
    * Bug 40071: Be explicit about no SEH with mingw-w64 on 32bit systems [tor-browser-build]
    * Bug 40077: Don't pass --no-insert-timestamp when building Firefox [tor-browser-build]
    * Bug 40090: NSIS 3.06.1 based builds are not reproducible anymore [tor-browser-build]

Tor Browser 10.0a6 -- August 26 2020
* All Platforms
  * Update HTTPS Everywhere to 2020.08.13
* Windows + OS X + Linux
  * Update Firefox to 78.2.0esr
  * Update Tor Launcher to 0.2.23
    * Bug 40002: After rebasing to 80.0b2 moat is broken [tor-launcher]
    * Translations update
  * Update NoScript to 11.0.39
  * Bug 21601: Remove unused media.webaudio.enabled pref
  * Bug 40002: Remove about:pioneer [tor-browser]
  * Bug 40082: Let JavaScript on safest setting handled by NoScript again [tor-browser]
  * Bug 40088: Moat "Submit" button does not work
  * Bug 40090: Disable v3 add-on blocklist for now [tor-browser]
* OS X
  * Bug 40015: Tor Browser broken on MacOS 11 Big Sur
* Android
  * Update Firefox to 68.12.0esr
  * Update NoScript to 11.0.38
  * Update Tor to 0.4.4.4-rc
* Build System
  * Windows + OS X + Linux
    * Bump Go to 1.13.15
  * Linux
    * Bug 40053: Also create the langpacks tarball for non-release builds [tor-browser-build]

(wiz)

bootstrap: Fix numerical calculation on Big Sur.

(jperkin)

ntp4: Don't assume arc4random_addrandom() is available.

(jperkin)

net/ntp4: Fix Linux build

(sjmulder)

reduce diffs to upstream and fix the plugin path.

(mrg)

gdb: fix installation of gcore.1 on platforms that support gcore

Previously, gcore.1 was only installed on Linux due to an omission
in gdb/doc/Makefile.in. This caused file-check errors on Linux since
gcore.1 was not mentioned in PLIST.common.

To fix this, apply upstream commit [0] so that gcore.1 is installed
whenever gcore is.

[0] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=4b136f6f9aba2122868704bc18fd21e1d232392c

(mcf)

Updated emulators/gxemul to 0.6.2nb1.

(thorpej)

- Add tap(4) networking support to gxemul.  See the networking documentation
  for it's theory of operation in gxemul and how to configure it.
- Add address filtering to the LANCE and Tulip emulation.

These changes have already been upstreamed in the main gxemul repository.

Bump package version to gxemul-0.6.2nb1.

(thorpej)

Find lua more reliably. Fixes at least macOS, still works on NetBSD.

(schmonz)

gdb: make python files in PLIST conditional on python option

These files are only installed when python support is enabled. This
issue was already fixed for devel/gdb7 by micha, so apply the same
fix here.

(mcf)

csound6-manual 6.15.0.

(mrg)

update to csound 6.15.0's manual to match the main package.

(mrg)

switch to python 3.  it works now (apparenty since at least 2016.)
update homepage to new github source.  bump pkgrevision.

(mrg)

*: recursive bump for vala 0.50

(wiz)

doc: Updated lang/vala to 0.50.1

(wiz)

vala: update to 0.50.1.

Vala 0.50.1
===========
* Various improvements and bug fixes:
  - codegen:
    + Don't falsly use g_return_val_if_fail() for async creation method [#1077]
    + Don't pass CCodeFunctionCall to NULL-aware free macro
  - vala:
    + Improve parsing of with-statement and allow it as embedded statement
    + Prioritize the usage of an existing with-variable instance,
      Recognize previously inserted implicit access to with-variable [#1043]
  - parser: Allow to begin expression with statement keyword [#1073]
  - g-i: Fix a couple of C compiler warnings
  - libvaladoc: Fix a couple of C compiler warnings
  - testrunner: Pass --enable-checking to increase coverage, Filter external
    -0X flags to preserve current default -O0
  - build: Stop passing obsolete --use-header

* Bindings:
  - gstreamer: Update from 1.19.0+ git master
  - gtk4: Don't skip LayoutManager.create_layout_child() [#1071]
  - gtk4: Update to 3.99.1+15b635d7
  - vapi: Update GIR-based bindings
  - webkit2gtk-4.0: Update to 2.30.1

Vala 0.50.0
===========
* Various improvements and bug fixes:
  - codegen: The actual struct size is required for calloc (POSIX) [#1068]

* Bindings:
  - gstreamer: Update from 1.18.0+ git master
  - poppler-glib: Update to 20.09.0
  - vapi: Update GIR-based bindings

Vala 0.49.92
============
* Various improvements and bug fixes:
  - Don't use locale dependent string functions on syntax strings [#1067]
  - girparser: Additionally fallback to "glib:type-name" to retrieve the cname
  - libvaladoc/girimporter:
    + Fallback to "name" for callback
    + Fallback to "glib:type-name" for class, interface and record
    + Improve parse_symbol_doc() and don't use parse_doc()
    + Skip "attribute" elements
  - libvaladoc/gtkdoc-importer:
    + Correctly retrieve "url" from "ulink" elements
    + Don't let parse_block_taglet() return null

* Bindings:
  - gtk4: Update to 3.99.1
  - vapi: Update GIR-based bindings

Vala 0.49.91
============
* Various improvements and bug fixes:
  - codegen: Don't append unreachable clean-up section of Block [#169] [#838]
  - codegen: Always include base_struct declaration if available [#464]
  - vala: Additionally break on ObjectCreationExpression in "tainted" check
  - vala: Add ObjectCreationExpression.to_string()
  - manual: Update from wiki.gnome.org

* Bindings:
  - gio-unix-2.0,glib-2.0: Updates for 2.66
  - gtk4: Resolve a few conflicts of methods with virtual-methods

Vala 0.49.90
============
* Regression and bug fixes:
  - Revert "girwriter: Use appropriate get_ccode_* functions" [#1059]
  - tests: Don't rely on undefined use-after-free behaviour of glibc
  - Add TraverseVisitor for traversing the tree with a callback
  - Force usage of temporary variables for "tainted" member accesses [#1061]
  - vala: Move transformation of unary increment/decrement to codegen
  - vala: Set parent_node for child nodes of lambda-expression [#1062]

* Bindings:
  - gstreamer: Update from 1.17.2+ git master
  - gtk4: Update to 3.99.0+e6e2d6b4
  - pango: Update from 1.46.0
  - webkit2gtk-4.0: Update to 2.29.91

Vala 0.49.2
===========
* Highlights:
  - Support non-virtual signals with default handler [#1056]

* Various improvements and bug fixes:
  - codegen: Include header for base-symbols when connecting vfuncs
  - vala:
    + Inherit CCode.returns_floating_reference attribute from base [#1053]
    + Mark tranformed member-access as qualified [#57]
    + Switch context if with-variable is not owned by with-statement [#1043]
  - girparser: Add support for string "feature_test_macro" metadata

* Bindings:
  - gio-2.0: Include "gio/gsettingsbackend.h" for GLib.SettingsBackend
    members [#1054]
  - goocanvas-2.0: Fix some field ownerships and types [#1057]
  - gstreamer: Update from 1.17.2+ git master
  - gtk4: Update to 3.99.0+358b698e
  - pango: Update from 1.45.4+
  - posix: Add missing "has_typedef" attribute for some delegates
  - posix: Declare WRDE_APPEND constant as public
  - vapi: Update GIR-based bindings

Vala 0.49.1
===========
* Highlights:
  - Use defintions of public header in internal header if available
    and drop --use-header compiler option and enable it by default [#713]
  - gdbus: Use GDBusProxy API to set `g-interface-info` at initialization time
  - Check vfunc of abstract/virtual methods and property accessors for NULL
    before using it [#153]
  - Check coverage of switch on enum-type and issue warnings if needed [#777]
  - Map empty start/end index to 0/length for slice expressions [#238]
  - Add support for "with" statement (mark them experiemental) [#327]
  - Use inheritted scopes of base-types/prerequisites to resolve symbols [#54]

* Various improvements and bug fixes:
  - codegen:
    + Add implicit parameter and instance checks in async method [#1005]
    + Make use of CCode.cname for label name of CatchClause
  - vala:
    + Move setting of target profile and standard packages into CodeContext
    + Remove some public API from expressions and statements
    + Add Expression.is_always_true/false() helpers
    + Add InvalidExpression as replacement for erroneous nodes instead
    + Don't loose invalid_syntax when copying array type for variables [#942]
  - girparser: Strip "Enum"-suffix only from enumeration
  - girwriter: Internal fields/vfuncs in type-symbols are public in C [#513]
  - libvaladoc: Remove unused Api.Class.get_finalize_function_name() API
  - testrunner: Add more -Werror=* flags

* Bindings:
  - gio-unix-2.0: Fix "g_unix_mount_for" binding [#1052]
  - glib-2.0,gio-2.0,gobject-2.0: Updates for 2.66
  - glib-2.0: data of GLib.Bytes is allowed to be null
  - glib-2.0: Add more explicit type_id attributes for various symbols
  - gstreamer: Update from 1.17.2+ git master
  - gtk4: Update to 3.99.0+d743e757
  - pango: Update from 1.45.2
  - vapi: Update GIR-based bindings

(wiz)

doc: Updated pkgtools/pkglint to 20.3.1

(rillig)