devel/ruby-power_assert: update to 1.1.7

Update ruby-power_assert to 1.1.7.

1.1.7 (2020-03-22)

Take care for new pry; Pry::Terminal no longer exists.

(taca)

avahi: remove (default-off) gtk2 option

The gtk3 option still remains, and this package has too many options already.
(Also, the gtk2 and python didn't work cleanly with each other.)

(wiz)

doc: Updated devel/ruby-tomlrb to 1.3.0

(taca)

devel/ruby-tomlrb: update to 1.3.0

Update ruby-tomlrb to 1.3.0.

1.3.0 - 2020-03-19

* Fix error with falsy table values

(taca)

doc: Updated devel/ruby-metasm to 1.0.4

(taca)

devel/ruby-metasm: update to 1.0.4

Update ruby-metasm to 1.0.4.
pkgsrc change: add "USE_LANGAUGES= # none".

No release notes available.

(taca)

Add USE_LANGUAGES

Add "USE_LANGUAGES= # none".

(taca)

devel/ruby-diva: add USE_LANGUAGES

Add "USE_LANGUAGES= # none".

(taca)

doc: Updated devel/ruby-cucumber-wire to 2.0.1

(taca)

devel/ruby-cucumber-wire: update to 2.0.1

Update ruby-cucumber-wire to 2.0.1.

## [In GIT](https://github.com/cucumber/cucumber-ruby-wire/compare/v2.0.0...v2.0.1)

### Removed

* Replace use of `MultiJSON` to use native JSON gem

(taca)

doc: Updated devel/php-xdebug to 2.9.3

(taca)

devel/php-xdebug: update to 2.9.3

Update php-xdebug to 2.9.3.

2.9.3 Fri, Mar 13, 2020

= Fixed bugs:

- Fixed issue #1753: Resolved breakpoints use information from wrong files
- Fixed issue #1758: Xdebug changes error_get_last results inside a try catch
- Fixed issue #1759: User registered opcode handlers should call ones already
  set by other extensions

2.9.2 Fri, Jan 31, 2020

= Fixed bugs:

- Fixed issue #1735: DBGp eval warning promoted to Exception can cause
  out-of-sync responses
- Fixed issue #1736: Segmentation fault when other extensions run PHP in
  RINIT
- Fixed issue #1739: Tracing footer not written

2.9.1 Thu, Jan 16, 2020

= Fixed bugs:

- Fixed issue #1721: Header may not contain NUL bytes in Unknown on line 0
- Fixed issue #1727: Debugger stops more often than expected due to
  resolving breakpoints
- Fixed issue #1728: INIT_STATIC_METHOD_CALL is not overloaded
- Fixed issue #1731: var_dump with DateTime does not output properties
  (Ryan Mauger)
- Fixed issue #1733: SEND_VAR_NO_REF_EX opcode, used for require(), is not
  overloaded
- Fixed issue #1734: Segfault with DBGp "source" with a out-of-range start
  line number

(taca)

doc/TODO: -squidview-0.81

- squidview-0.81.

(taca)

doc: Added archivers/php-pecl-zip version 1.18.2

(taca)

archivers/Makefile: add and enable php-pecl-zip

(taca)

archivers/php-pecl-zip: add package version 1.18.2

Add php-pecl-zip package version 1.18.2.

Zip management extension with libzip.

(taca)

databases/ruby-activeldap: add USE_LANGUAGES

Add "USE_LANGUAGES= # none".

(taca)

archivers/ruby-xz: allow build with ruby27

Allow build with Ruby 2.7.

(taca)

doc: Updated databases/ruby-pg to 1.2.3

(taca)

databases/ruby-pg: update to 1.2.3

Update ruby-pg to 1.2.3.

== v1.2.3 [2020-03-18] Michael Granger <ged@FaerieMUD.org>

Bugfixes:

- Fix possible segfault at `PG::Coder#encode`, `decode` or their implicit calls through
  a typemap after GC.compact. #327
- Fix possible segfault in `PG::TypeMapByClass` after GC.compact. #328

(taca)

doc: Updated www/squidview to 0.86

(taca)

www/squidview: update to 0.86

Update squidview to 0.86.
pkgsrc change: switch to use squid4/Makefile.common instead of squid3.

0.86 February 2017
- fix clang compiler warning, thanks http://people.freebsd.org/~danilo/

0.85 Janurary 2017
- another result code, thanks Yuri Voinov

0.84 December 2016
- INM result code as 'U' - unmodified
  thanks Yuri Voinov

0.82-0.83: May 2016
- add more squid result codes
  thanks to Yuri Voinov for the suggestions, corrections

0.81: January 2015
- squid result code update
  thanks to Yuri Voinov for the suggestion

(taca)

doc: Updated www/tscrape to 0.4nb1

(leot)

tscrape: Backport upstream patch to fetch tweet with multiple js-stream-item

Previously, without that patch, some tweets were accidentally not parsed.

PKGREVISION++

(leot)

doc: Updated security/pear-Crypt_GPG to 1.6.4

(taca)

security/pear-Crypt_GPG: update to 1.6.4

Update pear-Crypt_GPG to 1.6.4.

1.6.4 (2020-03-22 08:00 UTC)

Changelog:

* Use classmap for autoloading in composer as this package does not follow
  PSR-0.
* Support default gpg binary location on NixOS.
* Fix IgnoreVerifyErrors issues with GnuPG 1.4 and PHP5.
* Add possibility to add custom arguments to gpg commands.
* Add option to choose compression algorithm.
* Compatibility with phpunit >= 6.0.

(taca)

avahi: Fix PLIST.python

(nia)

doc: Updated editors/dasher to 5.0.0.b20200225

(nia)

doc: Updated audio/fasttracker2 to 1.14

(fox)

dasher: Update to 5.0.0.b20200225

This brings it up to speed with gtk3, etc.

Sadly the developer of dasher passed away, so the last release published
was a beta in 2016. I can't get it to build, so this is a git snapshot.

(nia)

audio/fasttracker2: Update to v1.14

Changes since v1.13:

v1.14 - 22.03.2020
- Bugfix: The Repeat/Replen. numbers in Smp. Ed. would not show the correct
  values for non-looping samples. It should always show the values even if the
  loop is disabled. This caused some strange visual bugs...
- Bugfix: Changing sample numbers on the white piano keys in Instr. Ed. was
  semi-broken (it would show wrong numbers until you changed to another instr.
  and back).
- Bugfix: If you set the current sample to 0E and scrolled down with the mouse
  wheel, the sample list would overflow.
- All bitmaps are now present as 4-bit (+ 1x 8-bit) RLE-compressed .bmp files,
  and are included in the binary as such. This makes it slightly easier to
  edit/add graphics.

(fox)

speech-dispatcher: Add ltdl to buildlink3

(nia)

doc: Updated www/php-nextcloud to 18.0.2

(ryoon)

php-nextcloud: Update to 18.0.2

Changelog:
18.0.2
Changes
    [stable18] disable timeout on app install via cli (server#19439)
    [stable18] Show proper file name when fetching details fails (server#19441)
    [stable18] Don't create invalid users (server#19451)
    [stable18] when we receive intentional empty whats new info, do not try to show it (server#19470)
    [stable18] Reduce flow logging at INFO level, move to DEBUG (server#19481)
    [stable18] Continue with next foreach iteration (server#19516)
    [stable18] Allow to overwrite the path on the cache event (server#19522)
    [stable18] Move RefreshWebcalJob logic to a proper service so that it may be called independently (server#19573)
    [stable18] Make sure the secondary view registered for systemtags has an id (server#19574)
    [stable18] Strip of users home path from share api message (server#19591)
    [stable18] FIx logging in accessibility controller (server#19607)
    [stable18] Change the route generation of AuthPublicShareController.php (server#19610)
    Replace tab character with space (server#19612)
    [stable18] remove noise from detectUuid and cache results (server#19624)
    [stable18] Make sure that the transfer details are present in the database during the cron run (server#19628)
    [stable18] Fix hover state color of drag-n-drop with theming and dark mode (server#19630)
    [stable18] Correctly trim long cyrillic note (server#19636)
    [stable18] Hash event UID to make sure it's not too long for PushProvider notifications (server#19639)
    [stable18] Theme search results (server#19690)
    [stable18] Also cache avatars when it's not allowed (server#19696)
    [stable18] Revive the "send email to new users" toggle for the user form (server#19702)
    [stable18] Fix non-centered no javascript message (server#19715)
    [stable18] Allow single file downloads so the video player works again (server#19729)
    [stable18] Add message for DoesNotExistException (server#19744)
    Fetch translate for Tags from files app (server#19762)
    [stable18] Various user settings fixes (server#19767)
    [stable18] Do not allow transfer ownership when the user isn't the owner (server#19773)
    [stable18] Introduce a default refresh rate app setting for calendar subscriptions (server#19784)
    [stable18] Fix regex for office documents (server#19800)
    [stable18] Fix filename and popover menu misalignment (server#19802)
    [stable18] Fix avatar in file list for users with an @ in the uid (server#19803)
    [stable18] Fix "Error loading the shares list TypeError: "this is undefined"" fo… (server#19824)
    [stable18] Prevent self-xss via invalid mysql user name on install screen (server#19830)
    [stable18] Correctly set up Application class (activity#430)
    [stable18] Chunk deleting of rows from the activity table (activity#435)
    [stable18] Fix 18 public folder (files_videoplayer#153)
    [stable18] Move to github actions (files_videoplayer#156)
    [stable18] Fix push notifications for multibyte notifications (notifications#576)
    [stable18] Prevent delete for impersonated users (notifications#582)
    [stable18] Delete unknown devices (notifications#583)
    [stable18] Fix long message (notifications#584)
    [stable18] ignore unavailable storages while scanning for albums (photos#211)
    [stable18] Don't flatten out albums (photos#213)
    [stable18] Avoid line breaks after long device names in "df" command (serverinfo#177)
    [stable18] Do not print errors if time server config is not available (serverinfo#178)
    [stable18] Change sidebar file while changing file in slideshow (viewer#405)

18.0.1
Changes
    [stable18] Fix cursor on disabled contenteditable divs (server#18961)
    Bump style-loader from 1.1.2 to 1.1.3 (server#18982)
    [stable18] Increase the timeout for app downloads (server#19025)
    [stable18] Fix loaded controller check (server#19060)
    [stable18] Allow to await the sidebar (server#19089)
    [stable18] expose Argon2 options (as we did for bcrypt) (server#19094)
    [stable18] fix multiselect actions for files (server#19108)
    [stable18] Adjust filelist color handling to new dark theme value (server#19117)
    [stable18] Reduce legacy event log level to debug (server#19118)
    [stable18] New file menu needs to be above the filelist header (server#19119)
    [stable18] Do not invert avatar colors when dark theme is enabled (server#19121)
    [stable18] Use the target for file notifications (server#19149)
    [stable18] Use correct appid for talk (server#19150)
    [stable18] add hub bundle for easy installation on upgraded instances (server#19153)
    [stable18] apps can have polyamorous relationships with bundles (server#19166)
    [stable18] Use themed favicon-fb (server#19189)
    [stable18] Fix "Call to undefined method OCA\\WorkflowEngine\\Entity\\File::t()" (server#19190)
    [stable18] Fix query selector for inverted icons (server#19206)
    [stable18] Do not encode contacts menu mailto links (server#19207)
    [stable18] Give the sharing tab a unique id so it also opens properly on other languages (server#19212)
    [stable18] WebcalRefreshJob: Fix reading refresh rate (server#19228)
    [stable18] Make sure to catch php errors during job execution (server#19269)
    [stable18] Center Buttons (server#19271)
    [stable18] Use the l10n from settings (server#19277)
    [stable18] Use proper andwhere clause (server#19278)
    [stable18] Add move (and firstlogin) option to transferownership service (server#19279)
    [stable18] for the DB ot pick an index specify the object_type (server#19283)
    [stable18] owner transfer multiselect fixes (server#19291)
    [stable18] Allow respecting PASSWORD_DEFAULT (server#19292)
    [stable18] Keep the modification time during decryptFile (server#19297)
    [stable18] Fix data Apache2 .htaccess typo (server#19302)
    [stable18] Fix display of DTEND for multi-day all-day event (server#19308)
    [stable18] do not overwrite global user auth credentials with empty values (server#19315)
    [stable18] Fix occ maintenance:install database connect failure (server#19326)
    [stable18] Fix event type (server#19330)
    [stable18] Array access on int will fail on php7.4 (server#19332)
    [stable18] Make sure the default share provider does not execute for other things (server#19334)
    [stable18] Disable link shares of disabled users (server#19340)
    [stable18] Prevent archieved download on secure view (server#19360)
    [stable18] Log Flow activity (server#19396)
    [stable18] Allow to serve static webm directly (server#19420)
    18.0.1 final (server#19422)
    [stable18] Allow to serve static mp4 directly (server#19428)
    [stable18] Update master php testing versions (activity#417)
    Update stable18 target versions (activity#418)
    [stable18] Update master php testing versions (files_pdfviewer#164)
    Update stable18 target versions (files_pdfviewer#165)
    Update stable18 target versions (files_texteditor#194)
    Update stable18 target versions (firstrunwizard#274)
    Update stable18 target versions (logreader#313)
    [stable18] Update master php testing versions (nextcloud_announcements#64)
    Update stable18 target versions (nextcloud_announcements#65)
    Update stable18 target versions (notifications#547)
    [stable18] Add linting via github actions (notifications#555)
    [stable18] Support Strict VoIP push notifications for iOS 13 SDK (notifications#565)
    [stable18] Update master php testing versions (password_policy#93)
    Update stable18 target versions (password_policy#94)
    [stable18] Lint with github actions (photos#153)
    [stable18] No more drone. Do it all on github actions (photos#158)
    [stable18] Respect .noimage and .nomedia files (photos#160)
    [stable18] added headers for your photos and favs (photos#172)
    [stable18] Fix/actions (photos#174)
    [stable18] Fix url escaping (photos#175)
    [stable18] Use actions from tutorial (photos#181)
    Update stable18 target versions (privacy#323)
    Update stable18 target versions (recommendations#182)
    Update stable18 target versions (serverinfo#170)
    [stable18] Update master php testing versions (survey_client#104)
    Update stable18 target versions (survey_client#105)
    [stable18] GitHub actions/lint (viewer#368)
    Fix url escaping (viewer#370)
    [stable18] Adjust tests syntax & formatting (viewer#379)
    [stable18] Use actions from tutorial (viewer#385)
    [stable18] Revert "Fix url escaping" (viewer#396)

(ryoon)

doc/TODO: + automake-1.16.2, git-base-2.26.

(wiz)

doc: Updated emulators/stella to 6.1

(nia)

stella: Update to 6.1

6.0.2 to 6.1: (March 22, 2020)

  * IMPORTANT NOTES:
    - Because of major event remapping changes, all remappings will be reset
      to defaults; if you had custom mappings, they will need to be
      re-entered again.

    - Because of major internal changes, all state files are now invalid.

    - Support for Windows XP has been discontinued as of this version.  WinXP
      is now completely out of support from Microsoft, so we are doing the
      same.

  * Major improvements to display mode handling in NTSC vs. PAL.  The window
    is now the same size for both modes, and scaling is applied to simulate
    the height of scanlines (in PAL mode, there are more scanlines and hence
    each is narrower).  This more properly emulates how the display would look
    on a real TV.

  * Removed the 'Display_Height' property, changing it to 'Display_VCenter'.
    This new feature, along with the display mode changes above, almost
    completely eliminate having to manually tweak each ROM so that it will
    not have part of the image cut off.

  * Removed the 'Display_YStart' property and all automatic detection of
    ystart.  It caused problems on some ROMs, and was not the way a real
    console would work anyway.  Related to this, ROMs now load much faster.

  * Major improvements to event remapping:
    - Allow mapping of modifier-key and button-direction combinations
    - Physical controllers can map the same action to different events on
      different virtual controllers
    - Many more events can be remapped
    - Events can be filtered by type in UI

  * Paths have been simplified:
    - The following file/directory locations are no longer configurable
      (statedir, nvramdir, cheatfile, palettefile, propsfile); they are
      now all under the base directory
    - Removed cfgdir; Distella config files are now placed with their
      associated ROMs
    - Added 'basedir' commandline argument, which allows to change the
      base directory where almost all config-related items are stored;
      related to this, discontinued the 'basedir.txt' functionality
    - Added 'baseinappdir' commandline argument, which sets the base
      directory to the application folder (Windows only for now); this
      replaces the functionality of 'basedir.txt'

  * Added automatic controller detection.

  * Controllers can be changed during emulation (no ROM reload required
    anymore).

  * Added support for Light Gun controller.

  * Added limited KidVid support (8, 9 and 0 start the games).

  * Removed superfluous controller option 'PADDLES_IDIR'.

  * Added configurable paddle dejittering.

  * Key-repeat mode improved; entering Time Machine by holding down a key
    combo continues to send events (previously, you had to release and then
    press the combo again).

  * Certain buttons in the UI can now be activated repeatedly by holding
    down the mouse button (Time Machine, debugger step/trace/frame advance,
    etc.)

  * Added option to configure mouse double click speed.

  * Added option to configure controller input repeat speed.

  * Added high quality scaling.

  * Made scanlines better aligned to scaling.

  * Added 'HiDPI' mode, which scales the UI by 2x when enabled.  This is
    meant for 4k and above monitors, but can actually be used at any
    lower resolution that is large enough to display the scaled UI.

  * Fixed TIA 'Center' option, Stella now remembers the last windowed position.

  * Added fractional (25% increments) TIA zooms.

  * Removed 'tia.fsfill' option, replacing it with 'tia.fs_stretch'.  This
    new option allows to preserve TIA image aspect ratio in fullscreen
    mode, or stretch to fill the entire screen.

  * Added configurable 'Overscan' option for fullscreen modes.

  * Fullscreen TIA modes no longer assume that desktop taskbars, etc
    are present, hence they are scaled to the proper fullscreen size.

  * Added option to display dialogs in screen corners.

  * Added hotkey for sound on/off.

  * Enhanced 'Command' menu to display current state and more commands.

  * Added option to save and load all TimeMachine states at once.

  * Added option to automatically load/save states when entering/exiting
    emulation.

  * Added option to change pitch of Pitfall II music.

  * ROM Info Viewer size is not limited to fixed zoom steps anymore.

  * ROM Info Viewer can now display multiple lines per property and the
    bank switching type.

  * In file listings, you can now select directories by holding 'Shift' on
    the first character entered.  Entering characters in lowercase still
    selects files, as before.

  * Fixed bug when starting ROMs via MacOS finder.

  * Added various developer options for oddball TIAs:
    - stuffed player, missiles and ball move
    - delayed playfield bits and color
    - delayed players and ball VDEL swap

  * Disabled some developer options for 'Player settings'.

  * Writes to RAM read ports are ignored now.

  * Added Developer setting, which breaks on writes to read ports.

  * Improved breakpoints to now consider the banks.

  * Improved debugger's TIA display and zoom windows.

  * Improved hotkeys, now many emulation keys work in debugger too.

  * Fixed display of negative values in debugger; sometimes they were
    shown as positive.

  * Reworked ROM properties database, making it load faster in certain cases.

  * Updated internal ROM properties database to ROM-Hunter version 16
    (thanks go to RomHunter for his tireless research in this area).
    Related to this, updated the snapshot collection.

  * Fixed 'Dancing Plate (Unknown) (PAL)' to use joystick.

  * Fixed cheatcode handling in 2K and 4K ROMs.

  * Fixed bug where ROMs smaller than 64 bytes were not recognized.

  * Fixed bug where frying one ROM was continued with the next ROM.

  * Fixed not working 7800 pause key.

  * Enhanced UA bankswitching to support certain Brazilian carts.

  * Fixed WD bankswitching.

  * Added FC bankswitching for Amiga's Power Play Arcade Video Game Album.

  * Added auto-detection of display format based on filename.

  * Auto-detection of bankswitch scheme by file extension now includes
    more human-readable formats (not restricted to DOS 3-char length).
    See the documentation for the new names.

  * Fixed bug in DPC+ scheme; 'fast fetch mode' was enabled at startup,
    when it should be disabled by default.

  * Some more work on DPC+ playfield 'jitter' effect for certain older DPC+
    driver versions; more ROMs are now detected properly.  Special thanks
    to SpiceWare for his research in this area.

  * Added proper Retron77 port.

  * Added proper libretro port, and fixed display for OpenGLES renderers.

  * PNG/ZIP image support is now conditionally compiled into Stella.
    All major ports (Linux/macOS/Windows) have it enabled by default.

  * SDL/GUI support is now conditionally compiled into Stella.  All major
    ports (Linux/macOS/Windows) have it enabled by default.  This is
    currently needed by the libretro port.

  * Updated included PNG library to latest stable version.

  * Updated UNIX configure script to work with the gcc version 10 and
    above.

-

(nia)

doc: Updated editors/codelite to 14.0

(nia)

codelite: Update to 14.0

Based on PR pkg/55084

(nia)

dar: Do not overwrite BUILDLINK_TRANSFORM

(ryoon)

avahi: Fix PLIST for non-gtk2 option

(ryoon)

mk/subst.mk: Unbreak builds with no substitutions.

At least some implementations of rmdir(1) do not allow you to remove the
current working directory.  Fixes bootstrap on SunOS.

(jperkin)

web2c: add a buildlink3.mk file.

This is needed for applications that link against TeX libraries,
particularly libsynctex.

(bsiegert)

doc: Removed time/gnotime

(nia)

gnotime: Remove. More GNOME 2 stuff unmaintained since 2008.

(nia)

gcc8: surround use of zlib/builtin.mk with CHECK_BUILTIN

(tnn)

doc: Removed textproc/gnome-spell

(nia)

gnome-spell: Remove. Long obsolete GNOME 2 component.

(nia)

openttd: Force gnu++11 properly, for alloca.

Bump PKGREVISION

(nia)

doc: Removed time/planner

(nia)

planner: Remove, unmaintained GNOME 2 component

(nia)

py-requests-unixsocket: needs py-pbr during build

(tnn)

libprelude: don't check configure.in for portability

we already patch 'configure'

(nia)

py-xmlschema: updated to 1.1.2

v1.1.2:
* Extension of validation tests with *XMLSchema11* validator
* Fixed several bugs
* Extended testing with Travis CI

(adam)

py-txaio: updated to 20.3.1

20.3.1
- MISC: Remove python2 support
- NEW: support import-time framework selection

(adam)

samba4: Update PLIST.Linux

From @mmoll on GitHub. Closes NetBSD/pkgsrc#55

(nia)

py-test-xprocess: needs py-setuptools_scm during build

(tnn)

py-buildbot-www: needs py-yaml during build

(tnn)

lmms: Avoid silly portability check.

This is a bash script used for publishing Linux builds...

(nia)

py-beancount: Try to fix bulk build failures.

(jperkin)

clean up if clause

(tnn)

editline: make manpage installation optional. Bump. PR pkg/55100

(tnn)

mk: Explain what SSP is, requested by rillig@.

(jperkin)

mk: Remove warning messages for unsupported check targets.

These appear to have been cargo culted around for a while, don't even have
anything to do with DESTDIR mode, and are completely useless.  Simplify the
logic a little while here.  Noticed by rillig@.

(jperkin)

avahi: Switch to gtk3 and avoid needing Python 2

Fix PLISTs to accomodate these things.

Bump PKGREVISION

(nia)

spidermonkey52: distinfo forgotten in previsous commit

(triaxx)

qt5-qtwebkit: Add missing tools

(nia)

spidermonkey52: fix PR pkg/54878

This patch hacks the virtualenv configuration process that finds invalid
modification times in some very rare configurations.

(triaxx)

p5-Config-Onion: fill in DESCR

(wiz)

py-beancount: sort PLIST

(wiz)

Updated graphics/gd

(adam)

gd: updated to 2.3.0

2.3.0:
Security
Potential double-free in gdImage*Ptr(). (CVE-2019-6978)
gdImageColorMatch() out of bounds write on heap. (CVE-2019-6977)
Uninitialized read in gdImageCreateFromXbm(). (CVE-2019-11038)
Double-free in gdImageBmp. (CVE-2018-1000222)
Potential NULL pointer dereference in gdImageClone(). (CVE-2018-14553)
Potential infinite loop in gdImageCreateFromGifCtx(). (CVE-2018-5711)

Fixed
Fix: add codecov support
Fix: gdTransformAffineCopy run error
Fix: Install dependencies move to .travis.yml
Fix: gdTransformAffineCopy() segfaults on palette images
Fix: gdTransformAffineCopy() changes interpolation method
Fix: gdImageSetInterpolationMethod(im, GD_DEFAULT) inconsistent
Fix: gdTransformAffineCopy() may use unitialized values
Fix: Remove cmake modules
Fix: Add RAQM support for cmake
Fix: gdImageGifAnimAddPtr: heap corruption with 2 identical images
Fix: gdImageCropAuto(…, GD_CROP_SIDES) crops left but not right
Fix: auto cropping has insufficient precision
Fix: Provide a suitable malloc function to liq
Fix: libtiff link returns 404 HTTP code
Fix: Failed to open 1 bit per pixel bitmap
Fix: new_width & new_height exception handling
Fix: gdImageCrop neglecting transparency
Fix: Potential infinite loop in gdImageCreateFromGifCtx
Fix: gd_gd.c format documentation appears to be incorrect
Fix: Fix new_a init error in gdImageConvolution()
Fix: gdImageFilledArc() doesn't properly draw pies
Fix: Fatal and normal libjpeg/libpng errors not distinguishable
Fix: Update var type to hold bigger w&h for ellipse
Fix: update doc files install directory in CMakeLists.txt
Correct some test depend errors
Update cmake min version to 3.7
Delete libimagequant source code download action in CMakeLists.txt
Improve msys support
Fix some logic error in CMakeLists.txt
Remove the following macro: HAVE_STDLIB_H, HAVE_STRING_H, HAVE_STDDEF_H, HAVE_LIMITS_H, HAVE_ERRNO_H, AC_C_CONST

Added
test cases for following API: gdImageCopyResized(), gdImageWebpEx(), gdImageCreateFromGd2PartPtr(), gdImageCloneMatch(), gdImageColorClosestHWB(), gdImageColorMatch(), gdImageStringUp(), gdImageStringUp16(), gdImageString(), gdImageString16(), gdImageCopyMergeGray(), gdImageCopyMerge()

(adam)

doc: Added finance/ledger2beancount version 2.0

(riastradh)

doc: Added textproc/scdoc version 1.10.1

(riastradh)

doc: Added textproc/p5-String-Interpolate version 0.32

(riastradh)

doc: Added devel/p5-Config-Onion version 1.007

(riastradh)

Teach finance/ledger to run tests.

They mostly pass...

(riastradh)

ledger2beancount: Import version 2.0

(riastradh)

scdoc: Import version 1.10.1

scdoc is a simple man page generator for POSIX systems written in C99.

(riastradh)

p5-String-Interpolate: Import version 0.32

(riastradh)

p5-Config-Onion: Import version 1.007

(riastradh)

New target test-env, like build-env and configure-env.

(riastradh)

sysutils/rsyslog: remove syslog.c from path substitution

That file has neither @-placeholders nor /etc.

(rillig)

doc: Added finance/py-beancount version 2.2.3

(riastradh)

asterisk16: fix L�inux packaging issues

(tnn)

comms/py-serial: fix nonexistent files in SUBST block

(rillig)

devel/py-pylint: fix typo in test program filename

(rillig)

goaccess: Use the curses framework rather than just linking to ncurses

goaccess requires getmouse(3).

(roy)

databases/py-sqlalchemy: remove nonexistent file

The test runner has apparently been replaced with a test suite.

(rillig)

goaccess: Fix build by including stdarg.h

Other source files include this, so this should be a safe change.

(roy)

textproc/py-jinja2: remove ignored SUBST block

The Python files are in src/jinja2, not jinja2. Since they haven't been
replaced in the past, it's probably ok to keep the few Unicode string
literals.

(rillig)

asterisk16: configure asks for -ledit. Comply.

(tnn)

devel/py-jaraco_util: remove nonexistent file from REPLACE_PYTHON

(rillig)

doc: updated editline

(tnn)

security/py-certbot: remove nonexistent files from SUBST block

(rillig)

editline: update to 20191231 snapshot

Please see src/lib/libedit in the NetBSD repository for the changes.

(tnn)

openjdk8: remove va-hack now that we have UNLIMIT_RESOURCES+=virtualsize

(tnn)

doc: Updated textproc/bat to 0.13.0

(fox)

textproc/bat: Update to 0.13.0

Changes since 0.12.1:

bat as a library

Beginning with this release, bat can be used as a library (#423).

This was a huge effort and I want to thank all people who made this possible:
@DrSensor, @mitsuhiko, @mre, @eth-p!

  * Initial attempt in #469 (@mitsuhiko)
  * Second attempt, complete restructuring of the bat crate, see #679
    (@DrSensor)
  * Updates to example, public API, error handling, further refactoring: #693
    #873 #875 (@sharkdp)

I want to stress that this is the very first release of the library. Things are
very likely to change. A lot of things are still missing (including the
documentation).

That being said, you can start using it! See the example programs in examples/.

You can see the API documentation here: https://docs.rs/bat/

Features

    * (Breaking change) Glob-based syntax mapping, see #877 and #592. With this
      change, users need to update their bat config files (bat --config-file),
      if they have any --map-syntax settings present.

      The option now works like this:

      --map-syntax <glob-pattern>:<syntax-name>

      For more information, see the --help text, the man page or the README.

    This new feature allows us to properly highlight files like:
      - /etc/profile
      - ~/.ssh/config

    * --highlight-line now accepts line ranges, see #809 (@lkalir)

    * A lot of updates to existing syntaxes via #644 (@benwaffle, @keith-hall)

    * BAT_CACHE_PATH can be used to place cached bat assets in a non-standard
      path, see #829 (@neuronull)

Bugfixes

    * Do not pass '--no-init' on newer less versions, see #749 and #786
      (@sharkdp)
    * 'bat cache' still takes precedence over existing files, see #666
      (@sharkdp)
    * .sc files should be treated as scala files, see #443 (@benwaffle)
    * Allow underscores and dashes in page names, see #670 (@LunarLambda)
    * Keep empty lines empty, see #601 (@mbarbar)
    * Wrapping does not work when piping, see #758 (@fusillicode, @allevo,
      @gildo)
    * Allow for non-unicode filenames, see #225 (@sharkdp)
    * Empty file without header produces incomplete grid, see #798 (@eth-p)
    * Files named build don't respect shebang lines, see #685 (@sharkdp)

Other

    * Proper wrapping support for output with wide Unicode characters, see #811
      #787 and #815 (@Kogia-sima)
    * Parametrizable names for man page and shell completion files, see #659
      #673 #656 (@eth-p)
    * Enabled LTO, making bat about 10% faster, see #719 (@bolinfest, @sharkdp)
    * Suggestions non how to configure bat for MacOS dark mode, see README
      (@jerguslejko)
    * Extended "Integration with other tools" section (@eth-p)
    * Updated instrutions on how to use bat as a man-pager, see #652, see #667
      (@sharkdp)
    * Add section concerning file encodings, see #688 and #568 (@sharkdp)
    * Updated sort order of command-line options in --help text and manpage, see
      #653 and #700 (@hrlmartins)
    * Updates to the man page syntax, see #718 (@sharkdp)
    * Japanese documentation updates, see #863 (@k-ta-yamada, @sorairolake and
      @wt-l00)
    * Accept "default" as a theme, see #757 (@fvictorio)
    * Support combination of multiple styles at the same time, see #857
      (@aslpavel)
    * Updated Windows installation instructions, see #852 (@sorenbug)
    * Updated man page, see #573 (@sharkdp)

New syntaxes

    * Jinja2, see #648 (@Martin819)
    * SaltStack SLS, see #658 (@Martin819)
    * /etc/fstab, see #696 (@flopp and @eth-p)
    * /etc/group and /etc/passwd, see #698 (@argentite)
    * /proc/cpuinfo and /proc/meminfo, see #593 (@sharkdp)
    * Nim, see #542 (@sharkdp)
    * Vue, see #826 (@chaaaaarlotte)
    * CoffeScript, see #833 (@sharkdp)

New themes

    * Dracula, see #687 (@clarfon)
    * Nord, see #760 (@crabique)
    * Solarized light and dark, see #768 (@hakamadare)

Packaging

    * bat is now in the official Ubuntu and Debian repositories, see #323 and
      #705 (@MarcoFalke)
    * bat can now be installed via MacPorts, see #675 (@bn3t)
    * Install fish completions into 'vendor_completions.d', see #651 (@sharkdp)

Thanks

    * To @eth-p for joining me as a maintainer! I'm very grateful for all the
      work you put into managing and responding to issues, improving our
      deployment, adding PR/issue templates (#837) as well as fixing bugs and
      implementing new features.

(fox)

lang/pear: fix typo in shell program filename

(rillig)

asterisk-sounds-native: remove

This package has been redundant since asterisk 1.4.
Source/explanation: https://www.voip-info.org/asterisk-native-sounds/

(tnn)

parallel/paexec: remove REPLACE_SH without effect

Both files don't exist. If corrected, the first file would end up in
share/examples, and mk/check/check-interpreter.mk allows /usr/bin/env is
those files.

(rillig)

mk/configure/replace-interpreter.mk: add missing empty line

The optional /usr/bin/env is independent from sh. It applies to all
languages.

(rillig)

py-beancount: Import version 2.2.3

From the web site <http://furius.ca/beancount/>:

  Beancount is a double-entry bookkeeping computer language that lets
  you define financial transaction records in a text file, read them
  in memory, generate a variety of reports from them, and provides a
  web interface.

(riastradh)

Fix C++17 compatibility.

(joerg)

asterisk-sounds-native: remove

This package has been redundant since asterisk 1.4.
Source/explanation: https://www.voip-info.org/asterisk-native-sounds/

(tnn)

Fix iconv use and other C++ issues. Still doesn't build due to both
outdated OpenSSL and GNU TLS code.

(joerg)

Unrestrict virtual/data size as it is very heavy at least with clang.
Fix drop historic casts that now violate the contract.

(joerg)

Unlimit virtual address space use. Apply higher limits during initial
certificate processing as well.

(joerg)