py-wheel: updated to 0.31.1

0.31.1
- Fixed arch as None when converting eggs to wheels

(adam)

gnupg2: add bzip2 and zlib to PKG_SUGGESTED_OPTIONS

Based on the previous default behave on NetBSD add bzip2 and zlib to the
suggested options. In the past gnupg2 automatically detected bzip2 and
zlib from the system and enabled these options also if no buildlink file
was present.

bzip2 and zlib still stay as options because if gnupg2 remote agent
forwarding is used both gnupg2 versions (local and remote) need to provide
the same compression options. This allow the user to build gnupg2 with or
without compression options if needed.

PKGREVISION bump because new suggested options might require an rebuild on
different operating systems if bzip2 and zlib was not accidentally detected
and enabled.

Reviewed by wiedi

(tm)

py-logbook: updated to 1.4.0

Version 1.4.0
- Added support for checking if trace logs have been emitted in TestHandler

Version 1.3.0
- Added support for controlling rotating file names -- Logbook now allows users to customize the formatting of rollover/rotating files

Version 1.2.0
- Added support for compressed log files, supporting both gzip and brotli compression methods
- Fixed CPU usage for queuing handlers

(adam)

doc: Updated comms/py-gammu to 2.11

(leot)

py-gammu: Update comms/py-gammu to 2.11

pkgsrc changes:
- Python-s 3 are now supported

Changes:
2.11
====
* Add support for the USSD in SMSD.
* Python 2.7 binaries available for Windows.

(leot)

doc: Updated comms/gammu to 1.39.0

(leot)

gammu: Update comms/gammu to 1.39.0

pkgsrc changes:
- Indent a DEPENDS (suggested by `pkglint -Wall')

Changes:
1.39.0
------
* Fixed answering call in AT module.
* Improved support for Huawei E392 and E3131.
* Fixed compatibility of binaries with Windows XP and 2003.
* Improved support for ZTE MF667.
* Updated list of GSM networks and countries.

(leot)

doc: Updated mail/roundcube to 1.3.6

(triaxx)

roundcube-plugin-zipdownload: update distinfo for 1.3.6

(triaxx)

roundcube-plugin-password: update distinfo for 1.3.6

(triaxx)

roundcube-plugin-enigma: update distinfo for 1.3.6

(triaxx)

roundcube: update to 1.3.6

* add JavaScript dependencies listed in jsdeps.json
  * put them on /pub/pkgsrc/distfiles/roundcube to avoid checksum error due
    to archive automatic generation (e.g. tinymce_languages.zip)
* remove patch-ac
* add example configuration fragment for www/lighttpd

CHANGELOG Roundcube Webmail
===========================

RELEASE 1.3.6
-------------
- Fix parsing date strings (e.g. from a Date: mail header) with comments (#6216)
- Fix PHP 7.2: count(): Parameter must be an array in enchant-based spellchecker (#6234)
- Fix possible IMAP command injection and type juggling vulnerabilities (#6229)
- Enigma: Fix key selection for signing
- Enigma: Enable keypair generation on Internet Explorer 11
- Fix check_request() bypass in places using get_uids() [CVE-2018-9846] (#6238)
- Fix bug where usernames without domain part could be malformed or converted to lower-case on logon (#6224)

RELEASE 1.3.5
-------------
- Managesieve: Fix bug where text: syntax was forced for strings longer than 1024 characters (#6143)
- Managesieve: Fix missing Save button in Edit Filter Set page of Classic skin (#6154)
- Fix duplicated labels in Test SMTP Config section (#6166)
- Fix PHP Warning: exif_read_data(...): Illegal IFD size (#6169)
- Enigma: Fix key generation in Safari by upgrade to OpenPGP 2.6.2 (#6149)
- Fix security issue in remote content blocking on HTML image and style tags (#6178)
- Added 9pt and 11pt to the list of font sizes in HTML editor
- Fix handling encoding of HTML tags in "inline" JSON output (#6207)
- Fix bug where some unix timestamps were not handled correctly by rcube_utils::anytodatetime() (#6212)

RELEASE 1.3.4
-------------
- Fix bug where contacts search could skip some records (#6130)
- Fix possible information leak - add more strict sql error check on user creation (#6125)
- Fix a couple of warnings on PHP 7.2 (#6098)
- Fix broken long filenames when using imap4d server - workaround server bug (#6048)
- Fix so temp_dir misconfiguration prints an error to the log (#6045)
- Fix untagged COPYUID responses handling - again (#5982)
- Fix PHP warning "idn_to_utf8(): INTL_IDNA_VARIANT_2003 is deprecated" with PHP 7.2 (#6075)
- Fix bug where Archive folder wasn't auto-created on login with create_default_folders=true
- Fix performance issue when parsing malformed and long Date header (#6087)
- Fix syntax error in mssql.initial.sql (#6097)
- Fix bug where contacts export by selection returned no more than 10 entries (#6103)
- Fix searching contacts by address in LDAP source (#6084)
- Fix X-Frame-Options:ALLOW-FROM support, remove custom click-jacking protection (#6057)

RELEASE 1.3.3
-------------
- Fix decoding of mailto: links with + character in HTML messages (#6020)
- Fix false reporting of failed upgrade in installto.sh (#6019)
- Fix file disclosure vulnerability caused by insufficient input validation [CVE-2017-16651] (#6026)
- Fix mangled non-ASCII characters in links in HTML messages (#6028)

RELEASE 1.3.2
-------------
- Improve detection for Egde browser and add pointer event support (#5922)
- Fix bug where pink image was used instead of a thumbnail when image resize fails (#5933)
- Fix so files size/count limit is verified (client-side) also on drag-n-drop uploads (#5940)
- Fix invalid template loading on a message error in preview frame (#5941)
- Fix bug where HTML messages could have been rendered empty on some systems (#5957)
- Fix wording of "Mark previewed messages as read" to "Mark messages as read" (#5952)
- Enigma: Fix decryption of messages encoded with non-ascii charset (#5962)
- Fix missing cursor in HTML editor on mail reply (#5969)
- Fix (again) bug where image data URIs in css style were treated as evil/remote in mail preview (#5580)
- Fix bug where mail search could return empty result on servers without SORT capability (#5973)
- Fix bug where assets_path wasn't added to some watermark frames
- Fix so untagged COPYUID responses are also supported according to RFC6851 (#5982)
- Fix issue caused by non-default session.cookie_lifetime setting (#5961)
- Fix Edge encoding bug when pasting text into the HTML editor, update to TinyMCE 4.5.8 (#5885)
- Fix handling of unknown Content-Disposition type (#6002)
- Fix truncated folder name on messages list in multi-folder mode, for folders with non-ascii characters (#6004)
- Fix bug where removing the last subfolder did not hide toggle button on its parent record (#6007)
- Fix bug where ghost messages could be added to the list after fast delete (#5941)

RELEASE 1.3.1
-------------
- Don't ignore (global) userlogins/sendmail logs in per_user_logging mode
- Add Preferences > Mailbox View > Main Options > Layout (#5829)
- Password: Fix compatibility with PHP 7+ in cpanel_webmail driver (#5820)
- Managesieve: Fix parsing dot-staffed lines in multiline text (#5838)
- Managesieve: Fix AM/PM suffix in vacation time selectors
- Managesieve: Fix bug where 'exists' operator was reset to 'contains' (#5899)
- Remove non-printable characters from filenames on download/display (#5880)
- Fix decoding non-ascii attachment names from TNEF attachments (#5646, #5799)
- Fix uninitialized string offset in rcube_utils::bin2ascii() and make sure rcube_utils::random_bytes() result has always requested length (#5788)
- Fix bug where HTML messages with @media styles could moddify style of page body (#5811)
- Fix style issue on selected and unfocused message that is part of a thread (#5798)
- Fix bug where a.button style from managesieve plugin could impact other elements (#5800)
- Fix position of selected icon for (Mailvelope) Encrypt button
- Fix fatal error when using DMY- or MDY-based date format in PostgreSQL (#5808)
- Fix bug where errors were not printed when using bin/update.sh (#5834)
- Fix PHP 7.2 warnings on count() use (#5845)
- Fix bug where Chrome could not upload the same file that was selected before (#5854)
- Fix duplicate messages on the list after deleting messages on the next to the last page (#5862)
- Fix bug where messages count was not updated after delete when imap_cache is set (#5872)
- Fix potential XSS vulnerability with malformed HTML message markup
- Fix sending message with "Too many public recipients" dialog buttons (#5924)
- Bring back double-click behavior on the message list which was removed in 1.3.0 (#5823)
- Enigma: Fix decrypting an encrypted+signed message when signature verification fails (#5914)

RELEASE 1.3.0
-------------
- Update to TinyMCE 4.5.7
- Fix bug where invalid recipients could be silently discarded (#5739)
- Fix conflict with _gid cookie of Google Analytics (#5748)
- Print error from CLI scripts when system/exec function is disabled (#5744)
- Fix bug where comment notation within style tag would cause the whole style to be ignored (#5747)
- Fix bug where it wasn't possible to scroll folders list in Edge (#5750)
- Fix folders list sorting on Windows - if php-intl is available (#5732)
- Fix addressbook searching by gender (#5757)
- Fix prevention from using % and * characters in folder name (#5762)
- Fix POST parameter reflection in default_charset selector (#5768)
- Enigma: Fix compatibility with assets_dir
- Managesieve: Skip redundant LISTSCRIPTS command
- Fix SQL syntax error on MariaDB 10.2 (#5774)
- Fix bug where zipdownload ignored files with the same name (#5777)
- Fix bug where it wasn't possible to set timezone to auto-detected value (#5782)

RELEASE 1.3-rc
--------------
- "Flattened" the larry theme: fresher look by removing shadows and gradients
- Support logging to php://stdout (#5721)
- Add support for DelSp=Yes in format=flowed messages (#5702)
- Update to jQuery 3.2.1
- Update to TinyMCE 4.5.6
- Plugin API: Call message_part_structure hook for sub-parts of multipart/alternative message (#5678)
- Enigma: Always use detached signatures (#5624)
- Enigma: Fix handling of messages with nested PGP encrypted parts (#5634)
- Minimize unwanted message loading in preview frame on drag (#5616)
- Fix failing database schema check in all engines except mysql (#5730)
- Fix autocomplete popup closing with click outside the input, don't handle Tab key as Enter (#5606)
- Fix jsdeps.json synchronization on update, warn about missing requirements of install-jsdeps.sh (#5598)
- Fix missing thread expand icon on search result in widescreen mode (#5613)
- Fix bug where image data URIs in css style were treated as evil/remote in mail preview (#5580)
- Fix bug where external content in src attribute of input/video tags was not secured (#5583)
- Fix PHP error on update of a contact with multiple email addresses when using PHP 7.1 (#5587)
- Fix bug where mail content frame couldn't be reset in some corner cases (#5608)
- Fix bug where some classic skin images were not displayed in IE/Edge (#5614)
- Fix bug where signature couldn't be added above the quote in Firefox 51 (#5628)
- Fix regression where groups with email address were resolved to its members' addresses
- Fix update of group name in the contacts list header on group rename (#5648)
- Add rewrite rule to disable access to /vendor/bin folder in .htaccess (#5630)
- Fix bug where it was too easy accidentally move a folder when using the subscription checkbox (#5655)
- Managesieve: Fix parser issue with empty lines between comments (#5657)
- Managesieve: Fix possible defect in handling \r\n in scripts (#5685)
- Fix/rephrase "unsaved changes" warning when cancelling a draft (#5610)
- Fix XSS issue in handling of a style tag inside of an svg element [CVE-2017-6820]
- Fix bug where settings/upload.inc could not be used by plugins (#5694)
- Fix regression in LDAP fuzzy search where it always used prefix search instead (#5713)
- Fix bug where namespace prefix could not be truncated on folders list if show_real_foldernames=true (#5695)
- Fix undesired effects when postgres database uses different timezone than PHP host (#5708)
- Installer: Fix DB schema initialization on MS SQL Server
- Fix bug where base_dn setting was ignored inside group_filters (#5720)
- Password: Fix security issue in virtualmin and sasl drivers [CVE-2017-8114]

RELEASE 1.3-beta
----------------
- Nicely handle contact deletion on contact edit (#5522)
- vcard_attachments: Add possibility to attach contact vCard to composed message (#4997)
- Preserve message internal/received date on import in mbox format (#5559)
- Zipdownload: Fix date format in mbox "From line"
- Possibility to display QR code for contacts data (#5030)
- Added identicon plugin
- Widescreen layout aka three column view (#5093)
- Unify automatic marking as \Seen in preview pane, full-page and extwin views (#5071)
- Disable double-click on the list when preview pane is on (#5199)
- Support hostname and hostname:port in force_https option (#5511)
- Support ALLOW-FROM in x_frame_options (#5122)
- Allow to omit a subject when sending an email (#5068)
- Warn about too many disclosed recipients in composed email [max_disclosed_recipients] (#5132)
- identity_select: Support Received header (#5085)
- Plugin API: Added get_compose_responses hook (#5457)
- Display error when trying to upload more files than specified in max_file_uploads (#5483)
- Add missing sql upgrade file for 'ip' column resize in session table (#5465)
- Do not show inline images of unsupported mimetype (#5463)
- Password: Added replacement variables support in password_pop_host (#5539)
- Password: Don't store passwords in temp files when using dovecotpw (#5531)
- Password: Added LDAP PPolicy driver (#5364)
- Password: Added cpanel_webmail driver (#5549)
- Password: Added possibility to nicely redirect from other plugins on password expiration (#5468)
- Implement separate action to mark all messages in a folder as \Seen (#5006)
- Implement marking as \Seen in all folders or in a folder and its subfolders (#5076)
- Archive: Don't reload messages list when it's not needed (#5225)
- Archive: Add option to automatically mark archived messages as \Seen (#5142)
- Improve randomness of password salts and random hashes (#5266)
- Password/cPanel: Add support for hash authentication and reseller accounts (#5252)
- Support host-specific imap_conn_options/smtp_conn_options/managesieve_conn_options (#5136)
- Center and scale images in attachment preview frame (#5421)
- Added max_message_size option enforced when attaching files to a composed message (#4993)
- Added Search button in quick search menus (#5312)
- Implement "one click" attachment/messages/photo upload (#5024)
- Squirrelmail_usercopy: Add option to define character set of data files
- Removed useless 'created' column from 'session' table (#5389)
- Dropped legacy browsers support (#5167)
    - Removed legacy_browser plugin
    - Removed hacks for IE < 10
    - Update to jQuery 3.1.1 and jQuery-UI 1.12.0
    - compile .min.js files with ECMASCRIPT5 option
- Require PHP >= 5.4
- Add possibility to preview and download attachments in mail compose (#5053)
- Add possibility to rename attachments in mail compose (#4996)
- Remove backward compatibility "layer" of bc.php (#4902)
- Support WEBP images in mail messages (#5362)
- Support MathML in HTML message preview (#5182)
- Rename Addressbook to Contacts (#5233)
- Remove PHP mail() support, smtp_server is required now (#5340)
- Display full message subject in onmouseover on truncated subject in mail view (#5346)
- Enigma: Support GnuPG 2.1 (#5313)
- Enigma: Support key generation for multiple identities (#5383)
- Enigma: Import keys from key-server(s) (#5286)
- Enigma: Search missing public keys on a key-server in mail compose (#5286)
- Enigma: Delete user keys when using deluser.sh script
- Enigma: Fix redundant list-secret-keys/list-public-keys calls on signing/encryption
- Enigma: Implement PGP encryption and signing in one go (#5302)
- Enigma: Display signature verification status for encrypted+signed messages (#5302)
- Display different attachment icon on encrypted messages
- Display different confirmation text when moving messages to Trash (#5220)
- Indicate that a collapsed thread has flagged children (#5013)
- Implemented message/rfc822 attachment preview
- Update to jsTimezoneDetect 1.0.6
- Managesieve: Add (optional) RAW script editor (#5414)
- Managesieve: Add option to automatically set vacation :from address (#5428)
- Managesieve: Support 'string' test from variables extension [RFC 5229] (#5248)
- Managesieve: Support 'duplicate' extension [RFC 7352]
- Managesieve: Unhide advanced rule controls if there are inputs with errors
- Managesieve: Display warning message when filter form contains errors
- Control search engine crawlers via X-Robots-Tag header instead of <meta> and robots.txt (#5098)
- Fixed redundancy in sql caching system and compatibility with Galera Cluster (#5439)
    - Removed redundant 'created' column from cache and cache_shared tables
    - Removed use of redundant data records
    - Added missing primary keys (dictionary, cache, cache_shared tables)
- Fix so templating system does not mess with external (e.g. email) content (#5499)
- Fix redundant keep-alive/refresh after session error on compose page (#5500)
- Managesieve: Fix handling of scripts with nested rules (#5540)
- Fix variable substitution in ldap host for some use-cases, e.g. new_user_identity (#5544)
- Enigma: Fix PHP fatal error when decrypting a message with invalid signature (#5555)
- Fix adding images to new identity signatures
- Fix rsync error handling in installto.sh script (#5562)
- Fix some advanced search issues with multiple addressbooks (#5572)
- Fix so group/addressbook selection is retained on page refresh

(triaxx)

py-WebOb: updated to 1.8.1

1.8.1:

Bugfix
- acceptparse.MIMEAccept which is deprecated in WebOb 1.8.0 made a backwards
  incompatible change that led to it raising on an invalid Accept header. This
  behaviour has now been reversed, as well as some other fixes to allow
  MIMEAccept to behave more like the old version.

1.8.0:

Feature
- request.POST now supports any requests with the appropriate
  Content-Type. Allowing any HTTP method to access form encoded content,
  including DELETE, PUT, and others.

Compatibility
- WebOb is no longer officially supported on Python 3.3 which was EOL'ed on
  2017-09-29.

Backwards Incompatibilities
- Many changes have been made to the way WebOb does Accept handling, not just
  for the Accept header itself, but also for Accept-Charset, Accept-Encoding
  and Accept-Language.
- When calling a @wsgify decorated function, the default arguments passed
  to @wsgify are now used when called with the request, and not as a
  start_response
- When setting app_iter on a Response object the content_md5 header
  is no longer cleared. This behaviour is odd and disallows setting the
  content_md5 and then returning an iterator for chunked content encoded
  responses.

Experimental Features
These features are experimental and may change at any point in the future.
- The cookie APIs now have the ability to set the SameSite attribute on a
  cookie in both webob.cookies.make_cookie and
  webob.cookies.CookieProfile.

Bugfix
- Exceptions now use string.Template.safe_substitute rather than
  string.Template.substitute. The latter would raise for missing mappings, the
  former will simply not substitute the missing variable. This is safer in case
  the WSGI environ does not contain the keys necessary for the body template.
- Request.host_url, Request.host_port, Request.domain correctly parse IPv6 Host
  headers as provided by a browser.
- Request.authorization would raise ValueError for unusual or malformed header
  values.
- Allow unnamed fields in form data to be properly transcoded when calling
  request.decode with an alternate encoding.
- Response.__init__ would discard app_iter when a Response had no
  body, this would cause issues when app_iter was an object that was tied
  to the life-cycle of a web application and had to be properly closed.
  app_iter is more advanced API for Response and thus even if it
  contains a body and is thus against the HTTP RFC's, we should let the users
  shoot themselves by returning a body.

(adam)

Updated www/nginx, www/nginx-devel

(adam)

nginx-devel: sync modules with nginx/Makefile.common

(adam)

nginx: updated to 1.14.0

nginx-1.14.0 stable version has been released, incorporating new features and bug fixes from the 1.13.x mainline branch - including the mirror module, HTTP/2 push, the gRPC proxy module, and more.

(adam)

Updated devel/py-astroid, sysutils/py-diffoscope, devel/py-pylint

(adam)

py-pylint: updated to 1.9.0

1.9.0:
* Added two new Python 3 porting checks, exception-escape and comprehension-escape
* Added a new deprecated-sys-function, emitted when accessing removed sys members.
* Added xreadlines-attribute, emitted when the xreadlines() attribute is accessed.
* The Python 3 porting mode can now run with Python 3 as well.
* docparams extension allows abstract methods to document what overriding
  implementations should return, and to raise NotImplementedError without
  documenting it.
* Special methods do not count towards too-few-methods,
  and are considered part of the public API.
* Enum classes do not trigger too-few-methods
* undefined-loop-variable takes in consideration non-empty iterred objects before emitting
* Add support for nupmydoc optional return value names.
* singleton-comparison accounts for negative checks
* Add a check consider-using-in for comparisons of a variable against
  multiple values with "==" and "or"s instead of checking if the variable
  is contained "in" a tuple of those values.
* defaultdict and subclasses of dict are now handled for dict-iter-* checks
* Added a new Python 2/3 check for accessing operator.div, which is removed in Python 3
* Added a new Python 2/3 check for accessing removed urllib functions
* logging-format-interpolation also emits when f-strings are used instead of % syntax.
* Don't trigger misplaced-bare-raise when the raise is in a finally clause
* Add a new check, possibly-unused-variable.
* no-else-return accounts for multiple cases
* Added two new checks, invalid-envvar-value and invalid-envvar-default.
* Add a check consider-using-join for concatenation of strings using str.join(sequence)
* Add a check consider-swap-variables for swapping variables with tuple unpacking
* Add new checker try-except-raise that warns the user if an except handler block
  has a raise statement as its first operator. The warning is shown when there is
  a bare raise statement, effectively re-raising the exception that was caught or the
  type of the exception being raised is the same as the one being handled.
* Don't crash on invalid strings when checking for logging-format-interpolation
* Exempt __doc__ from triggering a redefined-builtin
  __doc__ can be used to specify a docstring for a module without
  passing it as a first-statement string.
* Fix false positive bad-whitespace from function arguments with default
  values and annotations
* Fix stop-iteration-return false positive when next builtin has a
  default value in a generator
* Fix emission of false positive no-member message for class with  "private" attributes whose name is mangled.
* Fixed a crash which occurred when Uninferable wasn't properly handled in stop-iteration-return
* Use the proper node to get the name for redefined functions
* Don't crash when encountering bare raises while checking inconsistent returns
* Fix a false positive inconsistent-return-statements message when if statement is inside try/except.
* Fix a false positive inconsistent-return-statements message when while loop are used.
* Correct column number for whitespace conventions.
* Fix unused-argument false positives with overshadowed variable in
  dictionary comprehension.
* Fix false positive inconsistent-return-statements message when never
  returning functions are used (i.e sys.exit for example).
* Fix error when checking if function is exception, as in bad-exception-context.
* Fix false positive inconsistent-return-statements message when a
  function is defined under an if statement.
* New useless-return message when function or method ends with a "return" or
  "return None" statement and this is the only return statement in the body.
* Fix false positive inconsistent-return-statements message by
  avoiding useless exception inference if the exception is not handled.
* Fix bad thread instantiation check when target function is provided in args.
* Fixed false positive when a numpy Attributes section follows a Parameters
  section
* Fix incorrect file path when file absolute path contains multiple path_strip_prefix strings.
* Fix false positive undefined-variable for lambda argument in
    class definitions
* Add of a new checker that warns the user if some messages are enabled or disabled
  by id instead of symbol.
* Suppress false-positive not-callable messages from certain
  staticmethod descriptors
* Fix indentation handling with tabs
* Fix false-positive bad-continuation error
* Updated the default report format to include paths that can be clicked on in some terminals (e.g. iTerm).

(adam)

py-diffoscope: updated to 94

94:
Bug fixes.

(adam)

py-astroid: updated to 1.6.4

1.6.4
* Skip non-attrs specific attributes in attr wrapped classes.
* Add brain tip for numpy.sum.
* deque.rotate has a default parameter.

(adam)

doc: Updated math/py-numpy to 1.14.3nb1

(minskim)

math/py-numpy: Bump PKGREVISION for the new patch

The patch to turn off debugging options has changed the binary package
of py-numpy.

(minskim)

Updated devel/p5-Moose to 2.2011

(wen)

Update to 2.2011

Upstream changes:
2.2011  2018-05-16

  [BUG FIXES]

  - Various native trait methods would refuse "0" where they expected a
    string.  They have been fixed to allow all defined, non-reference values,
    and all objects with string, number, or boolean overloads.

  [DOCUMENTATION]

  - Moose::Manual::Construction now notes that roles can modify the BUILD sub.
    (thanks, E. Choroba!)

  [OTHER]

  - adjustments have been made to the Makefile for 'bmake', so it now works
    when not run in compatibility mode (Leon Timmermans).

(wen)

Updated devel/netcdf to 4.6.1

(wen)

Update to 4.6.1

Upstream changes:
## 4.6.1 - March 15, 2018

* [Bug Fix] Corrected an issue which could result in a dap4 failure. See [Github #888](https://github.com/Unidata/netcdf-c/pull/888) for more information.
* [Bug Fix][Enhancement] Allow `nccopy` to control output filter suppresion.  See [Github #894](https://github.com/Unidata/netcdf-c/pull/894) for more information.
* [Enhancement] Reverted some new behaviors that, while in line with the netCDF specification, broke existing workflows.  See [Github #843](https://github.com/Unidata/netcdf-c/issues/843) for more information.
* [Bug Fix] Improved support for CRT builds with Visual Studio, improves zlib detection in hdf5 library. See [Github #853](https://github.com/Unidata/netcdf-c/pull/853) for more information.
* [Enhancement][Internal] Moved HDF4 into a distinct dispatch layer. See [Github #849](https://github.com/Unidata/netcdf-c/pull/849) for more information.

## 4.6.0 - January 24, 2018
* [Enhancement] Full support for using HDF5 dynamic filters, both for reading and writing. See the file docs/filters.md.
* [Enhancement] Added an option to enable strict null-byte padding for headers; this padding was specified in the spec but was not enforced.  Enabling this option will allow you to check your files, as it will return an E_NULLPAD error.  It is possible for these files to have been written by older versions of libnetcdf.  There is no effective problem caused by this lack of null padding, so enabling these options is informational only.  The options for `configure` and `cmake` are `--enable-strict-null-byte-header-padding` and `-DENABLE_STRICT_NULL_BYTE_HEADER_PADDING`, respectively.  See [Github #657](https://github.com/Unidata/netcdf-c/issues/657) for more information.
* [Enhancement] Reverted behavior/handling of out-of-range attribute values to pre-4.5.0 default. See [Github #512](https://github.com/Unidata/netcdf-c/issues/512) for more information.
* [Bug] Fixed error in tst_parallel2.c. See [Github #545](https://github.com/Unidata/netcdf-c/issues/545) for more information.
* [Bug] Fixed handling of corrupt files + proper offset handling for hdf5 files. See [Github #552](https://github.com/Unidata/netcdf-c/issues/552) for more information.
* [Bug] Corrected a memory overflow in `tst_h_dimscales`, see [Github #511](https://github.com/Unidata/netcdf-c/issues/511), [Github #505](https://github.com/Unidata/netcdf-c/issues/505), [Github #363](https://github.com/Unidata/netcdf-c/issues/363) and [Github #244](https://github.com/Unidata/netcdf-c/issues/244) for more information.

## 4.5.0 - October 20, 2017

* Corrected an issue which could potential result in a hang while using parallel file I/O. See [Github #449](https://github.com/Unidata/netcdf-c/pull/449) for more information.
* Addressed an issue with `ncdump` not properly handling dates on a 366 day calendar. See [GitHub #359](https://github.com/Unidata/netcdf-c/issues/359) for more information.

### 4.5.0-rc3 - September 29, 2017

* [Update] Due to ongoing issues, native CDF5 support has been disabled by **default**.  You can use the options mentioned below (`--enable-cdf5` or `-DENABLE_CDF5=TRUE` for `configure` or `cmake`, respectively).  Just be aware that for the time being, Reading/Writing CDF5 files on 32-bit platforms may result in unexpected behavior when using extremely large variables.  For 32-bit platforms it is best to continue using `NC_FORMAT_64BIT_OFFSET`.
* [Bug] Corrected an issue where older versions of curl might fail. See [GitHub #487](https://github.com/Unidata/netcdf-c/issues/487) for more information.
* [Enhancement] Added options to enable/disable `CDF5` support at configure time for autotools and cmake-based builds.  The options are `--enable/disable-cdf5` and `ENABLE_CDF5`, respectively.  See [Github #484](https://github.com/Unidata/netcdf-c/issues/484) for more information.
* [Bug Fix] Corrected an issue when subsetting a netcdf3 file via `nccopy -v/-V`. See [Github #425](https://github.com/Unidata/netcdf-c/issues/425) and [Github #463](https://github.com/Unidata/netcdf-c/issues/463) for more information.
* [Bug Fix] Corrected `--has-dap` and `--has-dap4` output for cmake-based builds. See [GitHub #473](https://github.com/Unidata/netcdf-c/pull/473) for more information.
* [Bug Fix] Corrected an issue where `NC_64BIT_DATA` files were being read incorrectly by ncdump, despite the data having been written correctly.  See [GitHub #457](https://github.com/Unidata/netcdf-c/issues/457) for more information.
* [Bug Fix] Corrected a potential stack buffer overflow.  See [GitHub #450](https://github.com/Unidata/netcdf-c/pull/450) for more information.

### 4.5.0-rc2 - August 7, 2017

* [Bug Fix] Addressed an issue with how cmake was implementing large file support on 32-bit systems. See [GitHub #385](https://github.com/Unidata/netcdf-c/issues/385) for more information.
* [Bug Fix] Addressed an issue where ncgen would not respect keyword case. See [GitHub #310](https://github.com/Unidata/netcdf-c/issues/310) for more information.

### 4.5.0-rc1 - June 5, 2017

* [Enhancement] DAP4 is now included. Since dap2 is the default for urls, dap4 must be specified by
(1) using "dap4:" as the url protocol, or
(2) appending "#protocol=dap4" to the end of the url, or
(3) appending "#dap4" to the end of the url
Note that dap4 is enabled by default but remote-testing is
disbled until the testserver situation is resolved.
* [Enhancement] The remote testing server can now be specified with the `--with-testserver` option to ./configure.
* [Enhancement] Modified netCDF4 to use ASCII for NC_CHAR.  See [Github Pull request #316](https://github.com/Unidata/netcdf-c/pull/316) for more information.
* [Bug Fix] Corrected an error with how dimsizes might be read. See [Github #410](https://github.com/unidata/netcdf-c/issues/410) for more information.
* [Bug Fix] Corrected an issue where 'make check' would fail if 'make' or 'make all' had not run first.  See [Github #339](https://github.com/Unidata/netcdf-c/issues/339) for more information.
* [Bug Fix] Corrected an issue on Windows with Large file tests. See [Github #385](https://github.com/Unidata/netcdf-c/issues/385]) for more information.
* [Bug Fix] Corrected an issue with diskless file access, see [Pull Request #400](https://github.com/Unidata/netcdf-c/issues/400) and [Pull Request #403](https://github.com/Unidata/netcdf-c/issues/403) for more information.
* [Upgrade] The bash based test scripts have been upgraded to use a common test_common.sh include file that isolates build specific information.
* [Upgrade] The bash based test scripts have been upgraded to use a common test_common.sh include file that isolates build specific information.
* [Refactor] the oc2 library is no longer independent of the main netcdf-c library. For example, it now uses ncuri, nclist, and ncbytes instead of its homegrown equivalents.
* [Bug Fix] `NC_EGLOBAL` is now properly returned when attempting to set a global `_FillValue` attribute. See [GitHub #388](https://github.com/Unidata/netcdf-c/issues/388) and [GitHub #389](https://github.com/Unidata/netcdf-c/issues/389) for more information.
* [Bug Fix] Corrected an issue where data loss would occur when `_FillValue` was mistakenly allowed to be redefined.  See [Github #390](https://github.com/Unidata/netcdf-c/issues/390), [GitHub #387](https://github.com/Unidata/netcdf-c/pull/387) for more information.
* [Upgrade][Bug] Corrected an issue regarding how "orphaned" DAS attributes were handled. See [GitHub #376](https://github.com/Unidata/netcdf-c/pull/376) for more information.
* [Upgrade] Update utf8proc.[ch] to use the version now maintained by the Julia Language project (https://github.com/JuliaLang/utf8proc/blob/master/LICENSE.md).
* [Bug] Addressed conversion problem with Windows sscanf.  This primarily affected some OPeNDAP URLs on Windows.  See [GitHub #365](https://github.com/Unidata/netcdf-c/issues/365) and [GitHub #366](https://github.com/Unidata/netcdf-c/issues/366) for more information.
* [Enhancement] Added support for HDF5 collective metadata operations when available. Patch submitted by Greg Sjaardema, see [Pull request #335](https://github.com/Unidata/netcdf-c/pull/335) for more information.
* [Bug] Addressed a potential type punning issue. See [GitHub #351](https://github.com/Unidata/netcdf-c/issues/351) for more information.
* [Bug] Addressed an issue where netCDF wouldn't build on Windows systems using MSVC 2012. See [GitHub #304](https://github.com/Unidata/netcdf-c/issues/304) for more information.
* [Bug] Fixed an issue related to potential type punning, see [GitHub #344](https://github.com/Unidata/netcdf-c/issues/344) for more information.
* [Enhancement] Incorporated an enhancement provided by Greg Sjaardema, which may improve read/write times for some complex files.  Basically, linked lists were replaced in some locations where it was safe to use an array/table.  See [Pull request #328](https://github.com/Unidata/netcdf-c/pull/328) for more information.

(wen)

Updated sysutils/dmidecode to 3.1nb2.

(msaitoh)

Add two officially recommended patch to sysutils/dmidecode.

2017-09-14: Reflect HPE's new company name

After Hewlett Packard Enterprise split from Hewlett-Packard, DMI OEM
tables reflect the new company name.  Gen10 and subsequent systems will
use HPE.  Gen9 and prior systems continue to use the old "HP" name.

2018-04-11: decode HPE UEFI type 219 Misc Features

The incorrect "Misc Feature" bit in type 219 table was being used to
identify that the platform is capable of booting with UEFI.

(msaitoh)

Updated devel/hdf5 to 1.10.2

(wen)

Update to 1.10.2

Upstream changes:
HDF5 version 1.10.2 released on 2018-03-29
================================================================================
CONTENTS

- New Features
- Support for new platforms and languages
- Bug Fixes since HDF5-1.10.1
- Supported Platforms
- Tested Configuration Features Summary
- More Tested Platforms
- Known Problems

New Features
============

    Configuration and Build Systems:
    --------------------------------
    - CMake builds
    --------------

      - Changed minimum CMake required version to 3.10.

      This change removed the need to support a copy of the FindMPI.cmake module,
      which has been removed, along with its subfolder in the config/cmake_ext_mod
      location.

      (ADB - 2018/03/09)

      - Added pkg-config file generation

      Added pkg-config file generation for the C, C++, HL, and HL C++ libraries.
      In addition, builds on Linux will create h5cc, h5c++, h5hlcc, and h5hlc++ scripts in the bin
      directory that use the pkg-config files. The scripts can be used to build HDF5 C and C++
      applications (i.e, similar to the compiler scripts produced by the Autotools builds).

      (ADB - 2018/03/08, HDFFV-4359)

      - Refactored use of CMAKE_BUILD_TYPE for new variable, which understands
      the type of generator in use.

      Added new configuration macros to use new HDF_BUILD_TYPE variable. This
      variable is set correctly for the type of generator being used for the build.

      (ADB - 2018/01/08, HDFFV-10385, HDFFV-10296)

    - Autotools builds
    ------------------

      - Removed version-specific gcc/gfortran flags for version 4.0 (inclusive)
      and earlier.

      The config/gnu-flags file, which is sourced as a part of the configure
      process, adds version-specific flags for use when building HDF5. Most of
      these flags control warnings and do not affect the final product.

      Flags for older versions of the compiler were consolidated into the
      common flags section. Moving these flags simplifies maintenance of
      the file.

      The upshot of this is that building with ancient versions of gcc
      (<= 4.0) will possibly no longer work without hand-hacking the file
      to remove the flags not understood by that version of the compiler.
      Nothing should change when building with gcc >= 4.1.

      (DER - 2017/05/31, HDFFV-9937)

      - -fno-omit-frame-pointer was added when building with debugging symbols
      enabled.

      Debugging symbols can be enabled independently of the overall build
      mode in both the autotools and CMake. This allows (limited) debugging
      of optimized code. Since many debuggers rely on the frame pointer,
      we've disabled this optimization when debugging symbols are requested
      (e.g.: via building with --enable-symbols).

      (DER - 2017/05/31, HDFFV-10226)

    Library:
    --------
    - Added an enumerated value to H5F_libver_t for H5Pset_libver_bounds().

      Currently, the library defines two values for H5F_libver_t and supports
      only two pairs of (low, high) combinations as derived from these values.
      Thus the bounds setting via H5Pset_libver_bounds() is rather restricted.

      Added an enumerated value (H5F_LIBVER_V18) to H5F_libver_t and
      H5Pset_libver_bounds() now supports five pairs of (low, high) combinations
      as derived from these values.  This addition provides the user more
      flexibility in setting bounds for object creation.

      (VC - 2018/03/14)

    - Added prefix option to VDS files.

      Currently, VDS source files must be in the active directory to be
      found by the virtual file. Adding the option of a prefix to be set
      on the virtual file, using a data access property list (DAPL),
      allows the source files to locate at an absolute or relative path
      to the virtual file.
      Private utility functions in H5D and H5L packages merged into single
      function in H5F package.

      New public APIs:
            herr_t H5Pset_virtual_prefix(hid_t dapl_id, const char* prefix);
            ssize_t H5Pget_virtual_prefix(hid_t dapl_id, char* prefix /*out*/, size_t size);
      The prefix can also be set with an environment variable, HDF5_VDS_PREFIX.

      (ADB - 2017/12/12, HDFFV-9724, HDFFV-10361)

    - H5FDdriver_query() API call added to the C library.

      This new library call allows the user to query a virtual file driver
      (VFD) for the feature flags it supports (listed in H5FDpublic.h).
      This can be useful to determine if a VFD supports SWMR, for example.

      Note that some VFDs have feature flags that may only be present
      after a file has been created or opened (e.g.: the core VFD will
      have the H5FD_FEAT_POSIX_COMPAT_HANDLE flag set if the backing
      store is switched on). Since the new API call queries a generic VFD
      unassociated with a file, these flags will never be returned.

      (DER - 2017/05/31, HDFFV-10215)

    - H5FD_FEAT_DEFAULT_VFD_COMPATIBLE VFD feature flag added to the C library.

      This new feature flag indicates that the VFD is compatible with the
      default VFD. VFDs that set this flag create single files that follow
      the canonical HDF5 file format.

      (DER - 2017/05/31, HDFFV-10214)

    - The H5I_REFERENCE value in the H5I_type_t enum (defined in H5Ipublic.h)
      has been marked as deprectated.

      This ID type value is not used in the C library. i.e.: There are no
      hid_t values that are of ID type H5I_REFERENCE.

      This enum value will be removed in a future major version of the library.
      The code will remain unchanged in the HDF5 1.10.x  releases and branches.

      (DER - 2017/04/05, HDFFV-10252)

    Parallel Library:
    -----------------
    - Enabled compression for parallel applications.

      With this release parallel applications can create and write compressed
      datasets (or the datasets with the filters such as Fletcher32 applied).

      (EIP - 2018/03/29)

    - Addressed slow file close on some Lustre file systems.

      Slow file close has been reported on some Lustre file systems.
      While the ultimate cause is not understood fully, the proximate
      cause appears to be long delays in MPI_File_set_size() calls at
      file close and flush.

      To minimize this problem pending a definitive diagnosis and fix,
      PHDF5 has been modified to avoid MPI_File_set_size() calls when
      possible.  This is done by comparing the library's EOA (End of
      Allocation) with the file systems EOF, and skipping the
      MPI_File_set_size() call if the two match.

      (JRM - 2018/03/29)

    - Optimized parallel open/location of the HDF5 super-block.

      Previous releases of PHDF5 required all parallel ranks to
      search for the HDF5 superblock signature when opening the
      file. As this is accomplished more or less as a synchronous
      operation, a large number of processes can experience a
      slowdown in the file open due to filesystem contention.

      As a first step in improving the startup/file-open performance,
      we allow MPI rank 0 of the associated MPI communicator to locate
      the base offset of the super-block and then broadcast that result
      to the remaining ranks in the parallel group.  Note that this
      approach is utilized ONLY during file opens which employ the MPIO
      file driver in HDF5 by previously having called H5Pset_fapl_mpio().

      HDF5 parallel file operations which do not employ multiple ranks
      e.g. specifiying MPI_COMM_SELF (whose MPI_Comm_size == 1)
      as opposed to MPI_COMM_WORLD, will not be affected by this
      optimization.  Conversely, parallel file operations on subgroups
      of MPI_COMM_WORLD are allowed to be run in parallel with each
      subgroup operating as an independant collection of processes.

      (RAW - 2017/10/10, HDFFV-10294)

    - Added large (>2GB)  MPI-IO transfers.

      Previous releases of PHDF5 would fail when attempting to
      read or write greater than 2GB of data in a single IO operation.
      This issue stems principally from an MPI API whose definitions
      utilize 32 bit integers to describe the number of data elements
      and datatype that MPI should use to effect a data transfer.
      Historically, HDF5 has invoked MPI-IO with the number of
      elements in a contiguous buffer represented as the length
      of that buffer in bytes.

      Resolving the issue and thus enabling larger MPI-IO transfers
      is accomplished first, by detecting when a user IO request would
      exceed the 2GB limit as described above.  Once a transfer request
      is identified as requiring special handling, PHDF5 now creates a
      derived datatype consisting of a vector of fixed sized blocks
      which is in turn wrapped within a single MPI_Type_struct to
      contain the vector and any remaining data.  The newly created
      datatype is then used in place of MPI_BYTE and can be used to
      fulfill the original user request without encountering API
      errors.

      (RAW - 2017/09/10, HDFFV-8839)

    C++ Library:
    ------------
    - The following C++ API wrappers have been added to the C++ Library:
      + H5Lcreate_soft:
        // Creates a soft link from link_name to target_name.
        void link(const char *target_name, const char *link_name,...)
        void link(const H5std_string& target_name,...)

      + H5Lcreate_hard:
        // Creates a hard link from new_name to curr_name.
        void link(const char *curr_name, const Group& new_loc,...)
        void link(const H5std_string& curr_name, const Group& new_loc,...)

        // Creates a hard link from new_name to curr_name in same location.
        void link(const char *curr_name, const hid_t same_loc,...)
        void link(const H5std_string& curr_name, const hid_t same_loc,...)

        Note: previous version of H5Location::link will be deprecated.

      + H5Lcopy:
        // Copy an object from a group of file to another.
        void copyLink(const char *src_name, const Group& dst,...)
        void copyLink(const H5std_string& src_name, const Group& dst,...)

        // Copy an object from a group of file to the same location.
        void copyLink(const char *src_name, const char *dst_name,...)
        void copyLink(const H5std_string& src_name,...)

      + H5Lmove:
        // Rename an object in a group or file to a new location.
        void moveLink(const char* src_name, const Group& dst,...)
        void moveLink(const H5std_string& src_name, const Group& dst,...)

        // Rename an object in a group or file to the same location.
        void moveLink(const char* src_name, const char* dst_name,...)
        void moveLink(const H5std_string& src_name,...)

        Note: previous version H5Location::move will be deprecated.

      + H5Ldelete:
        // Removes the specified link from this location.
        void unlink(const char *link_name,
            const LinkAccPropList& lapl = LinkAccPropList::DEFAULT)
        void unlink(const H5std_string& link_name,
            const LinkAccPropList& lapl = LinkAccPropList::DEFAULT)

        Note: additional parameter is added to previous H5Location::unlink.

      + H5Tencode and H5Tdecode:
        // Creates a binary object description of this datatype.
        void DataType::encode() - C API H5Tencode()

        // Returns the decoded type from the binary object description.
        DataType::decode() - C API H5Tdecode()
        ArrayType::decode() - C API H5Tdecode()
        CompType::decode() - C API H5Tdecode()
        DataType::decode() - C API H5Tdecode()
        EnumType::decode() - C API H5Tdecode()
        FloatType::decode() - C API H5Tdecode()
        IntType::decode() - C API H5Tdecode()
        StrType::decode() - C API H5Tdecode()
        VarLenType::decode() - C API H5Tdecode()

      + H5Lget_info:
        // Returns the information of the named link.
        H5L_info_t getLinkInfo(const H5std_string& link_name,...)

      (BMR - 2018/03/11, HDFFV-10149)

    - Added class LinkCreatPropList for link create property list.

      (BMR - 2018/03/11, HDFFV-10149)

    - Added overloaded functions H5Location::createGroup to take a link
      creation property list.
        Group createGroup(const char* name, const LinkCreatPropList& lcpl)
        Group createGroup(const H5std_string& name, const LinkCreatPropList& lcpl)

      (BMR - 2018/03/11, HDFFV-10149)

    - A document is added to the HDF5 C++ API Reference Manual to show the
      mapping from a C API to C++ wrappers.  It can be found from the main
      page of the C++ API Reference Manual.

      (BMR - 2017/10/17, HDFFV-10151)

    Java Library:
    ----------------
    - Wrapper added for enabling the error stack.

      H5error_off would disable the error stack reporting. In order
      to re-enable the reporting, the error stack info needs to be
      saved so that H5error_on can revert state.

      (ADB - 2018/03/13, HDFFV-10412)

    - Wrappers were added for the following C APIs:
      H5Pset_evict_on_close
      H5Pget_evict_on_close
      H5Pset_chunk_opts
      H5Pget_chunk_opts
      H5Pset_efile_prefix
      H5Pget_efile_prefix
      H5Pset_virtual_prefix
      H5Pget_virtual_prefix

      (ADB - 2017/12/20)

    - The H5I_REFERENCE value in the H5I_type_t enum (defined in H5Ipublic.h)
      has been marked as deprectated.

      JNI code which refers to this value will be removed in a future
      major version of the library. The code will remain unchanged in the
      1.10.x releases and branches.

      See the C library section, above, for further information.

      (HDFFV-10252, DER, 2017/04/05)

    Tools:
    ------
    - h5diff has a new option to display error stack.

      Updated h5diff with the --enable-error-stack argument, which
      enables the display of the hdf5 error stack. This completes the
      improvement to the main tools: h5copy, h5diff, h5dump, h5ls and
      h5repack.

      (ADB - 2017/08/30, HDFFV-9774)

Support for new platforms, languages and compilers.
=======================================
    - None

(wen)

Updated net/py-smb to 1.1.23

(wen)

Update to 1.1.23
Add missing DEPENDS

Upstream changes:
Version 1.1.23, 2018-05-05 (Download)

Fix bug in listShares() method which fails when the remote server has many shares. Contributed by carlosefr (github).
Improve echo() method to test and fail if the provided data to echo is not a bytes object. Contributed by carlosefr (github).
Fix bug in listPath() method where the path to query is not properly terminated. Contributed by Yepoleb (github).
Version 1.1.22, 2017-09-17 (Download)

Fix bug in getAttributes() method which should return only the filename instead of the entire path for the filename property for the return result.
Version 1.1.21, 2017-09-09 (Download)

Fix bug where timestamp values for SMB1 getAttributes() response are not converted properly from FILETIME to epoch time values.
Version 1.1.20, 2017-08-13 (Download)

Add getSecurity() method to support security descriptors query via SMB2. Contributed by koniiiik (github).
Improve retrieveFile() and retrieveFileFromOffset() methods to allow file retrievals over SMB2 even when the file is being locked on the server.
Silently discards NMB SESSION_KEEPALIVE packets instead of raising warnings. Thanks to a-mushroom (github) for reporting this.
SMB sessionID will be sent in ECHO requests to conform to SMB2 specs. Thanks to divad (github) for reporting this.
Fix type errors for MD4 functions in python3. Contributed by viatoriche (github).
Version 1.1.19, 2016-11-13 (Download)

Ignore STATUS_PENDING during delete and file store operations
Version 1.1.18, 2016-04-09 (Download)

Rollback fixes to NTLMv2 response algorithm in pysmb 1.1.17. The fixes fail to work with some servers.
Add missing errno imports in SMBConnection.py
Fix UnboundLocalError raised when using type() in SMBConnection.py
Version 1.1.17, 2015-11-11 (Download)

Fix crashes in directory listing with keyerror 窶�support_dfs窶�.
Fix bugs in NTLMv2 response algorithm.
Fix bugs where client domain is not included as part of the session negotiation.
Version 1.1.16, 2015-05-10 (Download)

Fix typo errors in authentication error messages.
Improve share listings on SMB2 protocol by ignoring interim STATUS_PENDING responses.
Version 1.1.15, 2015-02-15 (Download)

Add new parameter to SMBConnection窶冱 storeFileFromOffset method to determine whether the remote file is to be truncated before writing.
Version 1.1.14, 2015-02-01 (Download)

Add support for DFS shares in listPath(). Thanks to humberry (github) for raising the issue and helping with the testing.
Fix bug in python3窶冱 SMB2 listPath implementation. Thanks to deejrose (github) for reporting the bug.
Version 1.1.13, 2014-10-18 (Download)

Add missing methods and improve compatibility with python3. Thanks to keisetsu (github) for submitting the patch.
Fix bug in SMB2 rename implementation which fails to rename directory. Thanks to Jayke Meijer for raising the bug and providing the packet capture.
Version 1.1.12, 2014-09-21 (Download)

Fix syntax error for python3 NBNSProtocol implementation
Fix bug in SMB1 implementation which results in access denied errors with Samba 3.0. Many thanks for John Sivak for his assistance and support in helping to troubleshoot and test the bug fixes.
Version 1.1.11, 2014-09-13 (Download)

Add support for unicode characters in domain, username and password.
Add storeFileFromOffset method to SMB API
Fix bug in getAttributes implementation for SMB1
Fix bug for NMB which uses broadcast flag for unicast queries
Update the Tree Connect Andx request implementation to support MS-SMB 2.2.4.7.1 extensions
Version 1.1.10, 2014-06-29 (Download)

Add getAttributes() method to SMBConnection and SMBProtocolFactory class.
Add isReadOnly property to SharedFile class.
Version 1.1.9, 2014-06-01 (Download)

Add support for domains in smb:// URLs. Contributed by Andy Piper.
Fix a bug which fails to test for the correct GSS security provider OID values. Thanks for Fanen for bug report and assistance in testing the fix.
Version 1.1.8, 2013-12-21 (Download)

Fix a bug in storeFile() method when the destination file is not overwritten if it exists in SMB1 communication. Thanks to Vaikar Amol for reporting this bug and helping to fix it.
Fix a SMB1 authentication problem when extended negotation is not carried out because the remote server has specified its support for extended security in the payload, instead of in the message flags2.
Version 1.1.7, 2013-09-27 (Download)

Improve listShares() function which can fail with the listing response is separated into multiple SMB packets for large number of shares. Thanks to Pieter De Clerck for reporting this bug and helping to test the bug fix.
Fix bug in python3 implementation where session connection can fail when remote server supports message signing. Thanks to Simon for reporting this bug.
Version 1.1.6, 2013-08-16 (Download)

Fix bug where the status of the SMB_COM_NEGOTIATE reply is not checked for error before allowing further processing. Thanks to Adrian Cox for discovering this bug and submitting the patch.
Version 1.1.5, 2013-06-19 (Download)

Add support for Direct hosting of SMB over TCP/IP (TCP port 445)
Version 1.1.4, 2013-05-31 (Download)

Improve query performance for query IP addresses for NetBIOS names in NetBIOSProtocol.py. Thanks to Ties de Kock for submitting the performance patch.
Fix bugs in SMBConnection when sending large data packets can result in AssertionError. Thanks to David K. Hess for submitting the bug fix.
Version 1.1.3, 2013-03-18 (Download)

Fix a bug which results in endless loop in SMBConnection when remote CIFS server closes the connection. Thanks to Nitin Garg for submitting the bug fixes.

(wen)

Updated misc/p5-Business-ISSN to 1.003

(wen)

Update to 1.003
Update LICENSE

Upstream changes:
1.003 2018-05-09T20:27:50Z
* Clarify that it's the Artistic License 2.0

1.002 2016-12-05T18:59:45Z
* Remove the prereq.t test. I'll do that locally.

1.001 2016-01-12T18:51:29Z
* Freshen the module

(wen)

Updated net/p5-SNMP-Info to 3.61

(wen)

Update to 3.61
Update DEPENDS

Upstream changes:
Version 3.61 (2018-05-09)

  [ENHANCEMENTS]

  * #255 IPv6 support - Set the transport-specifier if given an IPv6 address
  * #195 IP address table - IPv4 Address Table will use the
    IP-MIB::ipAddressTable if the deprecated IP-MIB::ipAddrTable doesn't
    return results

  [BUG FIXES]

  * #261 EIGRP Peer Neighbor Formatting / Munge
  * #252 Unpack binary MAC if present in cdp_port
  * Fix SNMPv1 cdp_run check

(wen)

Updated textproc/p5-YAML to 1.25

(wen)

Update to 1.25
Update BUILD_DEPENDS

Upstream changes:
Changes for version 1.25 - 2018-05-11
Applied several pull requests by tinita
Support trailing comments (PR #189, PR #190, PR #191)
Remove unused code (PR #192)
Use Test::Deep to actually test correctly for class names (PR #193)
Fix loading of mapping key which starts with `= ` (PR #194)
Fix loading strings with multiple spaces (PR #172)
Allow more characters in anchor name (PR #196)
Add $YAML::LoadBlessed for disabling loading objects (PR #197)
Applied several pull requests by tinita
Disable test with long string under certain conditions (PR #201)
Quote scalar if it equals '=' (PR #202)
Multiple regexp roundtrip does not grow (PR #203)
Add support for compact nested block sequences (PR #204)
Support reverse order of block scalar indicators (PR #205)
Support nested mappings in sequences (PR #206)

(wen)

Updated textproc/p5-XML-Compile-Tester to 0.91

(wen)

Update to 0.91

Upstream changes:
version 0.91: Fri May 11 01:51:33 CEST 2018

        Improvements:
        - change documentation style.
        - convert to GIT and GitHub

(wen)

Updated textproc/p5-XML-Compile-SOAP12 to 3.06

(wen)

Update to 3.06

Upstream changes:
version 3.06: Fri May 11 00:29:18 CEST 2018

        Improvements:
        - convert to GIT and GitHub

(wen)

doc: Updated x11/xfce4-gtk2-engine to 3.2.0nb8

(youri)

Disable broken gtk3 themes.

(youri)

doc: Updated x11/libxfce4util to 4.13.1

(youri)

Update:

4.13.1
======
[Please note that this is a development release.]
- Fix a minor typo: ment → meant
- Fix some autotools warnings, default debug to yes
- Fix duplicate DISTCHECK_CONFIGURE_FLAGS
- Improve gobject-introspection annotations

(youri)

doc: Updated devel/xfce4-conf to 4.13.4

(youri)

Update:

4.13.4
======
- Fix segfault in xfconf_cache_set_property_reply_handler when
  multiple calls are made (bug #13825)
- Allow to store empty arrays (bug #13791)
- Fix a path in xfconf_cache_set where the mutex isn't locked (bug #13790)

4.13.3
======
- Flush gdbus connection on xfconf_shutdown
- Correctly use xfconf_shutdown in xfconf-query
- Check for invalid GPtrArrays in the conversion
  from GValue to GVariant.
- Fix some build issues in AM subdir-objects
- Fix some autogen.sh warnings
- Better documentation processing.

4.13.2
======
- Fix cache corruption due to a wrong g_value_unset call.
- Update API gtk documentation

4.13.1
======
- Revert the bump of libxfconf version from 0 to 1,
  to avoid massive changes in all xfce's components.

4.13.0
======
- Port xfconf to gdbus
- Bump libxfconf version from 0 to 1.

(youri)

doc: Updated x11/libxfce4ui to 4.13.4

(youri)

Update:

4.13.4
======
- Fix missing gresource file in release tarball (Bug #13705)
- Add Vala support (Vidar Haarr)
- Fix gladeui2 path detection (Bug #13944)
- Fix make distcheck (Bug #14039)
- Fix incorrect use of AC_ARG_ENABLE(tests..) (Bug #13703)
- Use BOOLEAN instead of deprecated BOOL
- Allows to properly show some characters, such as ampersand (Bug #12715)
- Add api indices in gtk-doc
- Translation Updates: Amharic, Arabic, Asturian, Bulgarian, Catalan, Czech, Danish, German, Greek, English (Australia), English (United Kingdom), Spanish, Basque, Finnish, French, Galician, Hebrew, Croatian, Hungarian, Indonesian, Icelandic, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokm奪l, Dutch, Norwegian Nynorsk, Occitan (post 1500), Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Slovak, Slovenian, Serbian, Swedish, Telugu, Thai, Turkish, Uighur, Ukrainian, Chinese (China), Chinese (Hong Kong), Chinese (Taiwan)

4.13.3
======
- Fix make distcheck with gladeui2 install path
- Add an --enable-tests option
- Remove the filterout from introspection sources
- Move gresource building out of maintainer mode
- Fix condition in confirm dialog
- Add POTFILES.skip to appease gmake distcheck gods on OpenBSD
- ship libxfce4ui.gresource.xml in the tarball too
- Add libxfce4ui-marshal.list to EXTRA_DIST to fix
  --enable-maintainer-mode on released tarballs
- Fix build error with --disable-gtk2
- Translation updates: bg, cs, fr, it, ca, hr, it, da, ru.

4.13.2
======
- Fix build error with --disable-gtk3 Bug #12648
- Improve layout of labels in xfce dialogs
- Set a reasonable default window width to make sure labels wrap
- Improve vertical alignment of primary and secondary label
- Bump the default dialog width to 500px
- Update libxfce4ui documentation
- Fix make docs compilation warning
- Fix xfce_dialog_show_help(_with_version) doc
- Remove Makefile.am space to fix autogen.sh warning
- Better documentation processing
- Change xfce_dialog_show_help(_with_version)
- Default debug to yes instead of full
- Remove exo dependancy Bug #13326
- fix: add libxfce4ui_get_resource to abi check symbols Bug #13326
- Let autotools find and invoke glib-compile-resources Bug #13326
- Add support for GOBJECT-INTROSPECTION Bug #13461
- Add GtkDoc checks
- Add missing introspection.m4 file
- fix: make distcheck
- fix: remove deprecation warnings
- feat: Switch to Gtk3 default, Gtk2 Optional
- Rename introspection GIR to 4ui-2.0 to match util
- Translation updates: am ast ca da el eu fi gl id it ko lt ms nn
                      oc pl pt ro ru sl sr th zh_CN zh_TW

(youri)

doc: Updated x11/xfce4-exo to 0.12.0

(youri)

Update:

0.12.0 (Stable Release)
======
- Bug Fixes:
  - Add google-chrome-stable binary for the google-chrome helper (Xfce #13876)
- Build Changes:
  - Requirements updated: GTK 2.24, GTK 3.22, GLib 2.42, libxfce4ui 4.12,
    libxfce4util 4.12
- Translation Updates: Albanian, Amharic, Arabic, Asturian, Basque,
  Belarusian, Bengali, Bulgarian, Catalan, Chinese (China),
  Chinese (Hong Kong), Chinese (Taiwan), Croatian, Czech, Danish, Dutch,
  English (Australia), English (United Kingdom), Estonian, Finnish, French,
  Galician, German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Italian,
  Japanese, Kannada, Kazakh, Korean, Latvian, Lithuanian, Malay,
  Norwegian Bokmal, Norwegian Nynorsk, Occitan (post 1500), Panjabi (Punjabi),
  Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Serbian,
  Sinhala, Slovak, Slovenian, Spanish, Swedish, Telugu, Thai, Turkish, Uighur,
  Ukrainian, Urdu, Urdu (Pakistan), Vietnamese

0.11.5 (Development Release)
======
- New Features:
  - ExoString: Added new exo_str_is_flag
  - Helpers: Added Terminator (TerminalEmulator) (Xfce #13714)
- Bug Fixes:
  - exo-helper: Use full custom command path (Xfce #4093)
  - exo-launch: Pass flags to preferred application (Xfce #9427)
  - Replaced internet-mail icon with FD.o compliant emblem-mail (Xfce #13711)
  - Dropped conflicting Vivaldi helper (Xfce #13712, Gentoo #624546)
- Translation Updates: Bulgarian, Catalan, Chinese (China), Chinese (Taiwan),
  Croatian, Danish, Dutch, French, German, Hebrew, Indonesian, Kazakh, Korean,
  Lithuanian, Norwegian Bokmal, Polish, Portuguese (Brazil), Russian, Spanish,
  Swedish, Turkish

0.11.4 (Development Release)
======
From a development standpoint, this release can be considered the first release
candidate for the 0.12.x series. Full GTK+ 2 and 3 support is now available
and should meet the needs for any Xfce application development.
- New Features:
  - GTK Extensions: Added new exo_gtk_dialog_get_action_area and
    exo_gtk_dialog_add_secondary_button
  - GTK3: Added support for insensitive state in exo_cell_renderer_icon
  - Helpers: Added Brave, Google Chrome, and Vivaldi (WebBrowser)
  - Helpers: Added Geary (MailReader)
  - Helpers: Dropped Opera Mail (no longer available for Linux)
- Bug Fixes:
  - Removed --disable-debug flag from distcheck (Xfce #11556)
- Icons:
  - Replaced non-standard gnome-* icons
  - Replaced non-existent "missing-image" icon
- Deprecations:
  - Dropped gdk_window_process_updates for GTK+ 3.22
  - Replaced gdk_pixbuf_new_from_inline usage
  - Replaced gdk_screen_* usage
  - Replaced gtk_style_context_get_background_color usage
  - Removed warnings for gtk_dialog_get_action_area and GioScheduler
- Translation Updates: Arabic, Catalan, Chinese (China), Danish, Dutch, French,
  German, Hebrew, Indonesian, Korean, Lithuanian, Portuguese (Brazil), Russian,
  Spanish, Swedish

(youri)

doc: Updated x11/xfce4-panel to 4.13.3

(youri)

Update:

4.13.3
======
- Bugfixes:
  - Get the actual widget state flags to avoid constant redraws (Bug #14307)
  - launcher: Fix empty button in remove launcher dialog (Bug #13962)
  - launcher: Make sure icons are not oversize
  - launcher: Make sure the appropriate icon size is used
  - launcher: Fix resizing of pixbuf based icons (Bug #14138)
  - Move "Separator" to the top of the "Add New Items..." menu (Bug #14086)
  - Make a couple of strings translatable (Bug #14338)
  - Make former GtkStock dialog buttons translateable (Bug #14338)
  - Make double-click add plugin in the "Add item" dialog (Bug #9784)
  - clock: Improve discoverability of tooltip help-texts (Bug #11708)
  - Correctly initialize return value (Bug #10873)
  - Gtk+3 fixes:
    Fix various warnings with Gtk3 (Bug #14135)
    Fix Gtk+3 version in ifdef
    Use 'gdk_screen_is_composited' with Gtk3 (Bug #14128)
  Try to fix menu positioning with Gtk3.22
  - Various icon fixes:
    Switch to GtkIconTheme (Bug #14125)
    Fix missing icons with Adwaita icon theme (Bug #14133)
    Fix remaining deprecated icon names
- Translation updates: Belarusian, Bulgarian, Catalan, Chinese (China),
  Croatian, Czech, Danish, Dutch (Flemish), English (Australia), Finnish,
  French, Galician, German, Greek, Hebrew, Hungarian, Italian, Japanese,
  Lithuanian, Malay, Norwegian Bokm奪l, Polish, Portuguese (Brazilian),
  Russian, Serbian, Turkish, Ukrainian

4.13.2
======
- Add support for gobject-introspection (Vidar Haarr)
- Bugfixes:
  - actions: Fix GPtrArray usage (Bug #13981)
  - actions: Show Hybrid Sleep option (Bug #12771)
  - clock: Fix invalid datetime formats appearing in list (Bug #11527)
  - clock: Use freedesktop.org compliant icon (Bug #13779)
  - clock: Add a validator for digital custom formats (Bug #11527)
  - clock: Fix format validation (Bug #11527)
  - launcher: Fix custom images
  - tasklist: Fix scrolling to cycle through open windows (Bug #13789)
  - tasklist: Define cosmetic default padding for images (Bug #13865)
  - tasklist: Fix alignment of labels when orientation is changed (Bug #13864)
  - tasklist: Allow to hide label decorations (Bug #10546)
  - systray: Fix crash when systray is empty (Bug #13927)
  - systray: Don't lookup hash table for null keys (Bug #11929)
  - systray: Add option to display icons with square sizing (Bug #12093)
  - Pass socket id to D-Bus service to embed settings window (Bug #13854)
  - Make "Automatic" the default selection in the panel config dialog
  - Fix make distcheck (But #14040)
  - Improve gtkdoc
- Translation updates: Arabic, Asturian, Basque, Bengali, Bulgarian, Catalan,
  Chinese (China), Chinese (Hong Kong), Chinese (Taiwan), Croatian, Czech,
  Danish, Dutch (Flemish), English (Australia), English (Great Britain),
  Estonian, Finnish, French, Galician, German, Greek, Hebrew, Hungarian,
  Icelandic, Indonesian, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay,
  Norwegian Bokm奪l, Norwegian Nynorsk, Occitan, Panjabi, Polish, Portuguese,
  Portuguese (Brazilian), Romanian, Russian, Serbian, Slovak, Slovenian,
  Spanish, Swedish, Thai, Turkish, Ukrainian, Uyghur, Vietnamese

4.13.1
======
- Port to GDBus (Ali)
  This means the panel now depends on xfconf 4.13 - recommended is 4.13.3.
- Features:
  - systray: Allow ordering of items (Bug #11929)
  - tasklist: Add styleclass to make life easier for themers
- Bugfixes:
  - Fix DND between external plugins (Bug #13687)
  - Fix drag and drop for internal plugins (Bug #13642)
  - Correct enter and leave opacity label positions (Bug #13594)
  - Fix Gtk3 XfceArrowButtons not blinking (Bug #13599)
  - Fix datarootdir declaration in .pc files (Bug #13589)
  - Use fd.org terminal icon name (Bug #13592)
  - Don't let the wrapper crash on unknown properties (Bug #13614)
  - Set default panel-2 size of default settings
  - windowmenu: Fix icon size in menu
  - systray: Fix alignment of single non-square items (Bug #9095)
  - clock: Make the default date and time format translatable (Bug #9637)
- Translation updates: Arabic, Bengali, Bulgarian, Catalan, Chinese (China),
  Chinese (Taiwan), Croatian, Czech, Danish, Dutch (Flemish), French, German,
  Hebrew, Indonesian, Japanese, Kazakh, Korean, Lithuanian, Norwegian Bokm奪l,
  Polish, Portuguese, Portuguese (Brazilian), Russian, Slovak, Spanish, Swedish,
  Turkish, Ukrainian

(youri)

doc: Updated x11/xfce4-desktop to 4.12.4

(youri)

Downgrade to stable releases again.
Update to 4.12.4:

Incomplete changelogs:

4.12.3
======
Stable release of xfdesktop for Xfce 4.12.

* Bug fixes:
- Remove whitespaces from monitor name when accessing settings
  Patch by Andreas M端ller
- Settings: Fix loading of wallpaper previews (Bug #11892)
- Rotate images for wallpaper based on embedded orientation

* Translation updates:
  English (Australia) (en_AU), Spanish (Castilian) (es),
  Lithuanian (lt), Swedish (sv)

(youri)

Fix conflict.

(youri)

doc: Updated sysutils/xfce4-thunar to 1.7.2

(youri)

Update:

1.7.2
=====
- Thunar confuses files (bug #12435)
- Use display_name instead of basename to display filenames (bug #13532)
- Avoid unexpected overshoot fade on icon view
- Make it possible to assign accelerators to custom actions
- Killing thunar as well kills all launched sub-processes (bug #14277)
- Thunar User Configurable Actions do not work for remote locations (bug #7652), patch from (bug#7305)
- replaced links to "http://thunar.xfce.org/" with "https://docs.xfce.org/xfce/thunar/start"
- SIGSEGV when thumbnailer is under heavy load after opening many tabs (bug #13756)
- bumped dependency to xfce4-panel to API v.2 / 4.12.0
- Fixed creation of .desktop file when dropping URL into folder (bug #14239)
- Restoring non-empty folders leaves copy in Trash (bug #13535)
- Fixed an uncritical "use after free"
- Translation updates: Albanian, Catalan, Chinese (China), Chinese (Taiwan), Croatian, Czech, Danish,
Dutch, English (Australia),Finnish, French, Galician, German, Greek, Hebrew, Indonesian, Italian,
Japanese, Kazakh, Latvian, Lithuanian, Malay, Norwegian Bokm奪l, Persian (Iran), Polish, Portuguese,
Portuguese (Brazil), Russian, Serbian, Slovak, Spanish, Swedish, Turkish, Ukrainian

1.7.1
=====
- Do not translate "Trash" files and folders (Bug #14211)
- Regression: Context menu misplaced (bug #14216)
- Crash in thunar_file_is_gfile_ancestor (bug #14202)
- Add a systemd user unit for the two D-Bus session services (bug #12236)
- Add setting to show file sizes in bytes (bug #11690) fix for statusbar
- Add setting to show file sizes in bytes (bug #11690) fix for overwrite confirmation dialog
- Add setting to show file size in bytes in detailed view (Bug #11690)
- Show exact size in bytes in directory properties dialog (bug #12858)
- Thunar's "open with" custom command doesn't escape the path (bug #10883)
- Fix potential buffer overflow (bug #12444)
- Thunar fails to scan for file templates if the Templates directory is a symbolic link ( bug #12032 )
- missing codegen for "make dist" in thunar-tpa (bug #14190)
- Ported thunar-tpa to gdbus (bug #14038)
- fixed bug - no bool argument available for dbus signal "TrashChanged"
- Bump gtk to 3.22
- Prevent crash after updating thunar if old thunar deamon is still running
- Only show additional "real_name" of user in detailed_view if it is different from "name" (bug #13648)
- Change inappropriate word "Sentence" in upper-/lowercase renamer (bug #9483)
- Skip functions not meant to be introspectable (Bug #14045)
- Fix for failing GObject introspection build. Followup of (Bug #14070)
- thunarx-provider-module.h missing inside tar.bz2 file created by "make dist" (Bug #14070)
- Fix crash on unavailable file move copy (Bug #14056)
- Provide missing g-i annotations (Bug #14045)
- Use e.g. instead of i.e. (Bug #14035)
- Translation updates:Arabic, Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Croatian, Czech,
  Danish, Dutch, English (United Kingdom), Esperanto, Finnish, French, Galician, German, Hebrew, Japanese,
  Kazakh, Korean, Lithuanian, Malay, Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Serbian,
  Slovak, Spanish, Thai, Turkish, Ukrainian

1.7.0
=====
- GTK3 Port
- Replace dbus-glib with GDBus
- Improved Pathbar style for Location Selector
- Bump thunarx to version 3 and replace GtkAction with ThunarxMenu and ThunarxMenuItem
- GObject-Introspection support for thunarx-3
- Update thunarx documentation and fix its generation
- Same bugfixes from 1.6.13
- Translation updates: Albanian, Amharic, Arabic, Asturian, Bangla, Basque,
  Belarusian, Bulgarian, Catalan, Chinese (China), Chinese (Hong Kong),
  Chinese (Taiwan), Croatian, Czech, Danish, Dutch, English (Australia),
  English (United Kingdom), Esperanto, Estonian, Finnish, French, Galician,
  German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Italian, Japanese,
  Kazakh, Korean, Latvian, Lithuanian, Malay, Norwegian Bokm奪l, Norwegian Nynorsk,
  Occitan, Persian (Iran), Polish, Portuguese, Portuguese (Brazil), Punjabi,
  Romanian, Russian, Serbian, Slovak, Spanish, Swedish, Telugu, Thai, Turkish,
  Ukrainian, Urdu, Urdu (Pakistan), Uyghur, Vietnamese

1.6.14
======
- Do not translate "Trash" files and folders (Bug #14211)
- Crash in thunar_file_is_gfile_ancestor (bug #14202)
- Fix potential buffer overflow (Bug #12444)
- Fix crash on unavailable file move copy (Bug #14056)
- Translation updates: Arabic, Belarusian, Catalan, English (United Kingdom),
  Finnish, Galician, Malay, Romanian, Serbian, Slovak, Thai

1.6.13
======
- Handle cases when file watch is not supported (Bug #13881)
- Missing Trash Translation String (Bug #13409)
- Delete Thunar symlink on uninstall (Bug #13533)
- Handle g_mem_is_system_malloc deprecation
- Prefer local (file://) URIs than native ones (e.g. smb://) (Bug #13845)
- Translation updates: Amharic, Arabic, Asturian, Bangla, Basque, Belarusian,
  Bulgarian, Catalan, Chinese (China), Chinese (Hong Kong), Chinese (Taiwan),
  Croatian, Czech, Danish, Dutch, English (Australia), English (United Kingdom),
  Esperanto, Estonian, Finnish, French, Galician, German, Greek, Hebrew,
  Hungarian, Icelandic, Indonesian, Italian, Japanese, Kazakh, Korean, Latvian,
  Lithuanian, Malay, Norwegian Bokm奪l, Norwegian Nynorsk, Occitan, Persian,
  Polish, Portuguese, Portuguese (Brazil), Punjabi, Romanian, Russian, Serbian,
  Slovak, Spanish, Swedish, Telugu, Thai, Turkish, Ukrainian, Urdu,
  Urdu (Pakistan), Uyghur, Vietnamese

1.6.12
======
- Fix deadlock in mutex causing Thunar to hang (Bug #13481)
- Add support for Exif:ImageDescription and Exif:UserComment
- Do not pass NULL to g_file_test
- Bump libxfce4panel version for TPA plugin to 4.9.0
- Switch from XfcePanelImage to GtkImage
- Fixed a compilation error with the newest dev panel API
- Translation updates: Catalan, Dutch (Flemish), Galician, Korean, Lithuanian,
  Spanish, Thai

(youri)

doc: Updated x11/xfce4-tumbler to 0.2.1

(youri)

doc: Updated sysutils/py-psutil to 5.4.5

(minskim)

Update:

0.2.1
=====
- #9231 Handle 0 mtime threshold on Cleanup DBus method. This fixes
  running across all thumbnails that was causing very high I/O bandwidth
  usage when a file with a thumbnail gets deleted. (On dbus Cleanup method).

0.2.0
=====
- Stable release of tumbler ported to GDbus, in addition
  also fixes the bugs fixed by the version 0.1.32.

0.1.92.1
========
- Fixe missing entry of the new desktop thumbnailer plugin
  in tumbler.rc.

0.1.92
======
- Add support for loading thumbnailers from *.thumbnailer files
  (enhancement bug #7475)

0.1.90
======
- Tumbler relies now on gdbus instead of dbus-glib

(youri)

sysutils/py-psutil: Update to 5.4.5

Enhancements since 5.2.2:

- disk_io_counters() and net_io_counters() numbers no longer wrap
  (restart from 0). Introduced a new "nowrap" argument.
- psutil.net_connections() and psutil.Process.connections() "laddr"
  and "raddr" are now named tuples.
- swap_memory() now relies on /proc/meminfo instead of sysinfo()
  syscall so that it can be used in conjunction with PROCFS_PATH in
  order to retrieve memory info about Linux containers such as Docker
  and Heroku.
- psutil.users() provides a new "pid" field.
- process_iter() accepts two new parameters in order to invoke
  Process.as_dict(): "attrs" and "ad_value". With this you can iterate
  over all processes in one shot without needing to catch
  NoSuchProcess and do list/dict comprehensions.
- implemented full unicode support.
- disk_usage() on Python 3 is now able to accept bytes.
- test suite now enables all warnings by default.
- source distribution is dynamically generated so that it only
  includes relevant files.
- introduced PSUTIL_DEBUG environment variable which can be set in
  order to print useful debug messages on stderr (useful in case of
  nasty errors).
- added support for sensors_battery() on OSX.
- Process.children() is 2x faster on UNIX and 2.4x faster on Linux.
- deprecated method Process.memory_info_ex() now warns by using
  FutureWarning instead of DeprecationWarning.

(minskim)

doc: Updated sysutils/xfce4-appfinder to 4.13.0

(youri)

Update:

4.13.0
======
- Port to GTK+3.
- Update app icons to new standard names.
- Fuzzy search matching (Bug #10393).
- Translation updates: Amharic, Arabic, Asturian, Catalan, Czech,
  Danish, German, Greek, English (Australia), Spanish, Finnish,
  French, Galician, Hebrew, Croatian, Hungarian, Indonesian, Icelandic,
  Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokm奪l,
  Dutch, Norwegian Nynorsk, Occitan, Polish, Portuguese, Portuguese (Brazil),
  Russian, Slovak, Serbian, Swedish, Thai, Turkish, Ukrainian, Chinese (China),
  Chinese (Taiwan)

(youri)

doc: Updated x11/xfce4-settings to 4.13.2

(youri)

Update:

4.13.2
======
- New: Show location of the mouse pointer on keypress
- Fix: syncdaemon not starting with certain locales
- Fix: division by 0 crash from gdk_screen_height_mm()
- Fix: Remove existing socket from socket viewport (Xfce #13847)
- Fix: Use transient notifications for improved logging
- Fix: Do not expand event sounds section so font scaling is correctly
  positioned
- Improvements for multimonitor support:
  - Visualize all three display configuration states
  - Visually note if two displays overlap (mirrored) but are not cloned
  - Always draw active display last so it's on top
  - Fix: Correctly position monitors in extended mode
  - Fix: Race condition with monitor connect and disconnect
  - Fix: Segfault on monitor reconnect
  - Fix: Leave monitors where they were if possible (Xfce #14096)
- Deprecations:
  - Resolved GTK+ 3.22 deprecations (Xfce #14273)
- Translation updates: Amharic, Arabic, Asturian, Basque, Belarusian,
  Bengali, Bulgarian, Catalan, Chinese (China), Chinese (Hong Kong),
  Chinese (Taiwan), Croatian, Czech, Danish, Dutch, English (Australia),
  English (United Kingdom), Finnish, French, Galician, German, Greek, Hebrew,
  Hungarian, Icelandic, Indonesian, Italian, Japanese, Kazakh, Korean,
  Lithuanian, Malay, Norwegian Bokm奪l, Norwegian Nynorsk, Occitan (post 1500),
  Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Serbian, Slovak,
  Slovenian, Spanish, Swedish, Thai, Turkish, Uighur, Ukrainian

4.13.1
======
- This release now requires xfconf 4.13+
- New: Default monospace font option in the Appearance dialog
- New: Improved support for embedded DisplayPort connectors
- Fix: Display dialog drawing of displays
- Fix: Display dialog DND usability issue introduced in 4.13.0
- Fix: Make minimal dialog single instance (Xfce #11169)
- Fix: Linking to dbus-glib with xfconf 4.13+ (Xfce #13633)
- Deprecations:
  - Resolved gtk_menu_popup deprecation
  - Resolved gdk_error_trap_pop deprecation
  - Ignoring GdkScreen and GdkCairo deprecations in the display settings
    until GNOME or others find a resolution in their display management
- Code Quality:
  - Several indentation fixes
  - Drop duplicate drawing code
- Translation updates: Arabic, Bulgarian, Catalan, Chinese (China),
  Chinese (Taiwan), Croatian, Danish, Dutch, Finnish, French, Galician,
  German, Greek, Hebrew, Indonesian, Italian, Japanese, Kazakh, Korean,
  Lithuanian, Malay, Norwegian Bokmal, Norwegian Nynorsk, Occitan,
  Portuguese, Portuguese (Brazil), Russian, Serbian, Slovak, Spanish,
  Swedish, Thai, Ukrainian

(youri)

doc: Updated archivers/xfce4-thunar-archive to 0.4.0

(youri)

Update:

0.4.0
=====
- GTK3 Port
- Thunarx-3 Port (Thunar >=1.7.0 required)
- Engrampa archiver is now supported
- Updated translations: Albanian, Arabic, Asturian, Basque, Belarusian,
  Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Croatian, Czech,
  Danish, Dutch (Flemish), English (Australia), English (Great Britain),
  Finnish, French, Galician, German, Greek, Hebrew, Hungarian, Icelandic,
  Indonesian, Italian, Japanese, Kazakh, Korean, Latvian, Lithuanian, Malay,
  Norwegian Bokm奪l, Norwegian Nynorsk, Occitan, Panjabi, Polish, Portuguese,
  Portuguese (Brazilian), Romanian, Russian, Serbian, Slovak, Slovenian,
  Spanish, Swedish, Thai, Turkish, Ukrainian, Urdu, Urdu (Pakistan), Uyghur,
  Vietnamese

(youri)

doc: Updated multimedia/xfce4-thunar-media-tags to 0.3.0

(youri)

Update: 0.3.0
=============
- GTK3 Port.
- Thunarx-3 Port (Thunar >=1.7.0 required).
- Do not use empty string as separator (Bug #4822)
- Translation updates: Albanian, Arabic, Asturian, Basque, Bulgarian, Catalan,
  Chinese (China), Chinese (Taiwan), Croatian, Czech, Danish, Dutch,
  English (Australia), English (United Kingdom), Finnish, French, Galician,
  German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Italian, Japanese,
  Kazakh, Korean, Latvian, Lithuanian, Malay, Norwegian Bokm奪l, Occitan, Polish,
  Portuguese, Portuguese (Brazil), Punjabi, Romanian, Russian, Serbian, Slovak,
  Slovenian, Spanish, Swedish, Thai, Turkish, Ukrainian, Urdu, Urdu (Pakistan),
  Uyghur, Uzbek, Vietnamese.

(youri)

doc: Updated sysutils/xfburn to 0.5.5

(youri)

Update to 0.5.5:

xfburn 0.5.5 (2017-12-14)
============-------------

- Use gstreamer discovere api to get track duration
- Update xfburn icon in desktop-integration and main windows
- Do not use deprecated media-cdrom Icon (Bug #12233)
- Add appdata file (Bug #11201)
- Add GenericName in xfburn.desktop.in (Bug #12170)
- Do no open data-composition when running --audio-composition (Bug #13251)
- Improve error message when a plugin is missing.
- Missing strings in translations (Bug #11291)
- Translation Updates: Arabic, Asturian, Bulgarian, Catalan, Czech, Danish, German, Greek, English (Australia), English (United Kingdom), Spanish, Estonian, Basque, Finnish, French, Galician, Hebrew, Croatian, Hungarian, Indonesian, Icelandic, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokm奪l, Dutch, Norwegian Nynorsk, Occitan (post 1500), Polish, Portuguese, Portuguese (Brazil), Russian, Sinhala, Slovak, Serbian, Swedish, Telugu, Thai, Turkish, Uighur, Ukrainian, Chinese (China), Chinese (Taiwan)

(youri)